New Holland T5040 Specs ( 2008-2013 )
Overview
The New Holland T5040 is a farm utility tractor produced between 2008 and 2013 in Jesi, Italy, featuring a 4.5L four-cylinder turbocharged intercooled diesel engine rated at 85 gross horsepower. It is configured with an open center hydraulic system providing a 16.1 gpm pump flow and a Category II rear hitch with a 5,475 lb lift capacity. The model was available in both 2WD and 4WD configurations with multiple transmission options including mechanical and power shuttle variants.
Ideal Applications
Production
| Description | Utility tractor / Built in Jesi, Italy |
|---|---|
| Manufacturer | New Holland |
Engine
| Engine type | New Holland 4.5L 4-cyl diesel |
|---|---|
| Fuel tank | 33.5 gal (126.8 L) |
| Air cleaner | dual dry element |
| Description | New Holland / turbocharged intercooled diesel / 4-cylinder / liquid-cooled |
| Displacement | 274 ci (4.5 L) |
| Emissions | Tier III |
| Power (gross) | 85 hp (63.4 kW) |
| Pre-heating | grid heater |
| Rated RPM | 2300 |
| Starter volts | 12 |
| Drawbar (tested) | 61.2 hp (45.6 kW) |
| Engine (gross) | 85 hp (63.4 kW) |
| PTO (claimed) | 70 hp (52.2 kW) |
| PTO (tested) | 73.2 hp (54.6 kW) |
Transmission
| Gears | 12 forward and reverse / 12 forward and reverse / 20 forward and 12 reverse / 24 forward and reverse |
|---|---|
| Transmission | Dual Command |
| Type | mechanical shuttle / power shuttle / mechanical shuttle / power shuttle |
| Transmission type | 12-speed mechanical shuttle / 12-speed power shuttle / 20-speed mechanical shuttle / 24-speed power shuttle |
| Transmission type | 12-speed mechanical shuttle / 12-speed power shuttle / 20-speed mechanical shuttle / 24-speed power shuttle |
Mechanical
| Cab | Flat deck platform with ROPS. Cab optional with heat and air-conditioning. |
|---|---|
| Description | Hydraulic wet disc brakes |
| Differential lock | mechanical rear standard |
| Drive | 4x2 2WD |
| Steering | hydrostatic power |
Hydraulics
| Mid valves | 0 to 2 |
|---|---|
| Pressure | 2,871 psi (198.0 bar) |
| Pump flow | 16.1 gpm (60.9 lpm) |
| Rear valves | 2 to 3 (open or closed center) |
| Steering flow | 10.4 gpm (39.4 lpm) |
| Type | open center |
Hitch
| Control | mechanical lower-link draft sensing |
|---|---|
| Rear lift (at 24"/610mm) | 5,475 lbs (2483 kg) |
| Rear Type | II |
PTO
| Clutch | mechanical |
|---|---|
| Engine RPM | 540@2199 |
| Rear PTO | independent |
| Rear PTO Type | 540/1000 (1.375) |
Electrical
| Battery CCA | 960 |
|---|---|
| Battery volts | 12 |
| Charging amps | 120 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| 2WD Length | 92.2 inches (234 cm) |
|---|---|
| 4WD Length | 92.5 inches (234 cm) |
| Flange rear axle | 69.7 inch length (1770 mm) |
| Front tread | 58.8 to 82.4 inches (2WD) (149 to 209 cm) / 68.9 to 84.7 inches (4WD) (175 to 215 cm) |
| Height (cab) | 100.8 inches (256 cm) |
| Height (ROPS) | 108.9 inches (276 cm) |
| Wheelbase | 92.5 inches (234 cm) |
| Wheelbase | 92.5 inches (234 cm) |
New Holland T5040 Weight
| 2WD Max front axle | 7716 lbs (3499 kg) |
|---|---|
| 4WD Max front axle | 9920 lbs (4499 kg) |
| Max rear axle | 10141 lbs (4599 kg) |
New Holland T5040 attachments
| Description | front-end loader |
|---|
OCED Tractor Test 2502
| Description | Diesel 12-speed 2WDJanuary 2009 - March 2009, Link: OCED Tractor Test 2502 file / PTO performance / Drawbar performance / Gear 3II used for power test. / Gear 1II used for pull test. |
|---|---|
| Fuel use | 4.4 gal/hour (16.7 l/hour) / 4.8 gal/hour (18.2 l/hour) / 46.9 gal/hour (177.5 l/hour) / 4.7 gal/hour (17.8 l/hour) |
| Max power | 73.2 hp (54.6 kW) / 61.2 hp (45.6 kW) |
| Max pull | 5980 lbs (2712 kg) |
| Power at rated engine speed | 68.3 hp (50.9 kW) |
| Power at rated PTO speed | 709 hp (528.7 kW) |
Nebraska Tractor Test Results
Test #S738This section is compiled from original Nebraska Tractor Test PDFs using AI-assisted extraction and human review. For full verification, download the source PDF above. Differences between reports, incomplete source data, and occasional extraction or data entry mistakes can occur.
No PTO performance data available.