Massey Ferguson 8732 Specs ( 2014-2017 )

Compare Tractor

Overview

The Massey Ferguson 8732 is a row-crop farm tractor produced in Jackson, Minnesota, between 2014 and 2017. It features an 8.4L 6-cylinder AGCO POWER diesel engine and a Dyna-VT continuously variable transmission, with a shipping weight of 23,810 lbs and a 122-inch wheelbase.

Ideal Applications

Tested Power Output: According to OCED Tractor Test 2908, the tractor achieved a maximum PTO power of 284.8 hp and a maximum drawbar pull of 22,480 lbs.
Hydraulic and Hitch Capacity: The unit is equipped with a closed center load sensing hydraulic system providing a 54 gpm pump flow and a Category III/IVN rear hitch with a lift capacity of 26,455 lbs.
Engine and Emissions Configuration: The liquid-cooled 512.6 ci engine utilizes selective catalytic reduction and a 15.8-gallon diesel exhaust fluid tank to meet Tier IV emission standards.

Production

Description Row-Crop tractor / Built in Jackson, Minnesota, USA
Manufacturer Massey Ferguson (a part of AGCO)

Engine

Engine type AGCO POWER 8.4L 6-cyl diesel
Exhaust fluid (DEF) 15.8 gal (59.8 L)
Fuel tank 166 gal (628.3 L)
Bore/Stroke 4.37x5.71 inches (111 x 145 mm)
Description AGCO POWER / turbocharged with air-to-air intercooler diesel / 6-cylinder 24-valve / liquid-cooled
Displacement 512.6 ci (8.4 L)
Emission control selective catalytic reduction (SCR)
Emissions Tier IV
Maximum Power 320 hp (238.6 kW)
Power 290 hp (216.3 kW)
Rated RPM 2100
Starter electric
Starter volts 12
Drawbar (tested) 232.7 hp (173.5 kW)
PTO (claimed) 250 hp (186.4 kW)
PTO (tested) 284.8 hp (212.4 kW)

Transmission

Description continuously variable transmission (CVT)
Gears infinite forward and reverse (2-range)
Transmission Dyna-VT
Type continuously variable transmission (CVT)

Mechanical

Cab Cab standard with air-conditioning. Optional OptiRide Plus hydraulic cab suspension. AgCommand ready; AUTO-GUIDE 3000
Description Hydraulic wet disc brakes
Differential lock electro-hydraulic
Drive type Four-wheel drive
Steering hydrostatic power

Hydraulics

Pressure 2900 psi (200.0 bar)
Pump flow 54 gpm (204.4 lpm)
Type closed center load sensing (CCLS)
Valves 4 to 6

Hitch

Drawbar Cat. 3
Rear lift (at ends) 26455 lbs (11999 kg)
Rear Type III/IVN

PTO

Rear PTO independent
Rear PTO Type 1000/1000E (1.75)

Electrical

Battery volts 12
Charging amps 240 (twin 120A)
Charging system alternator
Charging volts 12
Ground negative

Dimensions & Tires

Bar rear axle 4.33 by 105 inches (109 by 2667 mm) / 4.33 by 118 inches (109 by 2997 mm)
Height (cab) 141 inches (358 cm)
Length 218.6 inches (555 cm)
Shipping weight 23810 lbs (10800 kg)
Wheelbase 122 inches (309 cm)
Weight 23810 lbs (10800 kg)
Wheelbase 122 inches (309 cm)

OCED Tractor Test 2908

Description Diesel Dyna-VT 4WDJanuary 2015 - April 2015, Link: OCED Tractor Test 2908 file / PTO performance / Drawbar performance / Pull at 13.12KPH / Pull at 2.35KPH
Fuel use 15.6 gal/hour (59.0 l/hour) / 15.1 gal/hour (57.2 l/hour) / 15.6 gal/hour (59.0 l/hour) / 15.4 gal/hour (58.3 l/hour)
Max power 284.8 hp (212.4 kW) / 232.7 hp (173.5 kW)
Max pull 22480 lbs (10196 kg)
Power at rated engine speed 263.9 hp (196.8 kW)
Power at rated PTO speed 282.2 hp (210.4 kW)

References

Description 8700 Series Tractors published in 2017, by Massey Ferguson / New MF 8700 Series published in 2014, by Massey Ferguson

Variants

MT665E similar Challenger model

Nebraska Tractor Test Results

Test #OECD 2908
Download PDF
Test Date: January to April, 2015
Location: IRSTEA, Centre d'Antony, 1 rue Pierre-Gilles de Gennes CS 10030 Antony, 92163, Cedex, France

This section is compiled from original Nebraska Tractor Test PDFs using AI-assisted extraction and human review. For full verification, download the source PDF above. Differences between reports, incomplete source data, and occasional extraction or data entry mistakes can occur.

Maximum Power & Fuel Consumption

Max Power (1 Hour)
284.80 hp
@ 1954 rpm
Rated Engine Speed
263.90 hp
N/A lb/hp·hr
Standard PTO Speed
282.20 hp
@ N/A rpm PTO

Torque Statistics

Maximum Torque 970 lb-ft (1,315 Nm)
Torque Rise 46.8%

PTO Power Curve

303 227 152 76 0 0 hp @ 2143 rpm 0 2143 264 hp @ 2097 rpm 264 2097 226 hp @ 2112 rpm 226 2112 170 hp @ 2115 rpm 170 2115 114 hp @ 2123 rpm 114 2123 57 hp @ 2136 rpm 57 2136 MAX: 263.9 HP ENGINE RPM POWER (HP)

Maximum Power & Fuel Consumption Details

Condition HP kW RPM
Maximum Power (1 Hour) 284.80 212.40 1954

Varying Power & Fuel Consumption

Click column headers to sort

Power RPM gal/hr lb/hp·hr hp·hr/gal DEF gal/hr
263.90 2097 15.13 0.40 17.45 0.67
226.40 2112 13.20 0.41 17.15 0.60
169.90 2115 10.81 0.44 15.71 0.49
114.00 2123 8.25 0.51 13.81 0.30
57.30 2136 5.23 0.64 10.95 0.16
N/A 2143 2.93 N/A N/A N/A