Massey Ferguson 7618 Specs ( 2013-2014 )

Compare Tractor

Overview

The Massey Ferguson 7618 is a row-crop tractor built in Beauvais, France, between 2013 and 2014. It is equipped with a Sisu 6.6L 6-cylinder turbocharged diesel engine and was available with either the Dyna-6 24-speed power shift or the Dyna-VT continuously variable transmission.

Ideal Applications

Engine and Power Output: The 6.6L diesel engine features electronic high-pressure common rail fuel injection and is rated at 165 net hp, with OECD testing recording a maximum PTO power of 156.2 hp on the Dyna-6 model.
Hydraulic and Hitch Configuration: The tractor is configured with a closed-center load sensing hydraulic system providing a total flow of 29 gpm and includes a Category II rear hitch with a 9,800 lb lift capacity at the ends.
Tested Pulling Capacity: OECD testing recorded a maximum drawbar pull of 15,085 lbs for the Dyna-VT 4WD configuration and 13,375 lbs for the Dyna-6 4WD configuration.

Production

Description Row-Crop tractor / Built in Beauvais, France
Manufacturer Massey Ferguson (a part of AGCO)

Engine

Engine type Sisu 6.6L 6-cyl diesel
Bore/Stroke 4.252x4.724 inches (108 x 120 mm)
Compression 17.4:1
Description Sisu / turbocharged air-to-air aftercooled diesel / 6-cylinder 24-valve / liquid-cooled
Displacement 402.5 ci (6.6 L)
Emission control selective catalytic reduction (SCR)
Emissions Interim Tier IV
Fuel system electronic high-pressure common rail
Power (net) 165 hp (123.0 kW)
Pre-heating thermostart
Rated RPM 2100
Starter electric
Starter volts 12
Drawbar (tested) 118.7 hp (88.5 kW)
Engine (net) 165 hp (123.0 kW)
PTO (claimed) 130 hp (96.9 kW)
PTO (tested) 156.2 hp (116.5 kW)

Transmission

Description Six power shift gears in four ranges. / continuously-variable transmission (CVT)
Gears 24 forward and reverse / infinite forward and reverse (2-range)
Transmission Dyna-6 / Dyna-VT
Transmission type 24-speed six-speed power shift
Type six-speed power shift

Mechanical

Cab Cab standard. Optional hydraulic OptiRide cab suspension. AGCOCOMMAND (optional); Auto-Guide 3000 (optional)
Description Power steering / Hydraulic wet disc brakes
Differential lock electro-hydraulic standard
Drive type Four-wheel drive
Final drives inboard planetary
Trailer brakes hydraulic (optional)

Capacity

Exhaust fluid (DEF) 8 gal (30.3 L)
Fuel 82 gal (310.4 L)
Hydraulic system 26.4 gal (99.9 L)

Hydraulics

Capacity 26.4 gal (99.9 L)
Pressure 2900 psi (200.0 bar)
SCV flow 24.3 gpm (92.0 lpm)
Total flow 29 gpm (109.8 lpm)
Type closed-center load sensing (CCLS)
Valves 3 (mechanical)

Hitch

Control electronic lower link draft sensing
Drawbar Cat. II with drop pin
Front Hitch optional
Rear lift (at ends) 9800 lbs (4445 kg)

PTO

Clutch electro-hydraulic
Engine RPM 540@1890
Rear PTO independent
Rear PTO Type 540/1000 (1.375)

Electrical

Batteries 2
Battery volts 12
Charging amps 120
Charging system alternator
Ground negative

Dimensions & Tires

Bar rear axle 79.84 inch length (2027 mm) / 89.65 inch length (Dyna-VT) (2277 mm)
Flange rear axle 72.24 inch length (1834 mm)
Front axle 4WD / QuadLink Suspended 4WD
Height (cab) 117.4 inches (298 cm)
Length 192.8 inches (489 cm)
Long bar rear axle 105.2 inch length (2672 mm) / 113 inch length (Dyna-VT) (2870 mm)
Wheelbase 113.1 inches (287 cm)
Weight 15060 lbs (6831 kg)
Wheelbase 113.1 inches (287 cm)

Massey Ferguson 7618 Weight

Max capacity 20393 lbs (Dyna-6) (9250 kg)
Max Drawbar 3527 lbs (1599 kg)
Shipping 15060 lbs (6831 kg)

OCED Tractor Test 2775

Description Diesel Dyna-VT 4WDMarch 2013 - April 2013, Link: OCED Tractor Test 2775 file / PTO performance / Drawbar performance / Pull at 7.8KPH / Pull at 3.1KPH
Fuel use 8.7 gal/hour (32.9 l/hour) / 8.3 gal/hour (31.4 l/hour) / 8.6 gal/hour (32.6 l/hour) / 8.3 gal/hour (31.4 l/hour)
Max power 152.1 hp (113.4 kW) / 110 hp (82.0 kW)
Max pull 15085 lbs (6842 kg)
Power at rated engine speed 136.9 hp (102.1 kW)
Power at rated PTO speed 147.0 hp (109.6 kW)

OCED Tractor Test 2788

Description Diesel Dyna-6 4WDNovember 2012 - July 2013, Link: OCED Tractor Test 2788 file / PTO performance / Drawbar performance / Gear 3A used for power test. / Gear 1F used for pull test.
Fuel use 8.7 gal/hour (32.9 l/hour) / 8.2 gal/hour (31.0 l/hour) / 8.6 gal/hour (32.6 l/hour) / 7.9 gal/hour (29.9 l/hour)
Max power 156.2 hp (116.5 kW) / 118.7 hp (88.5 kW)
Max pull 13375 lbs (6066 kg)
Power at rated engine speed 141.1 hp (105.2 kW)
Power at rated PTO speed 151.9 hp (113.3 kW)

References

Description 7600 Series published in 2013, by Massey Ferguson

Tractor Tests

Description OECD 2775: diesel Dyna-VT 4WD / OECD 2788: diesel Dyna-6 4WD

Nebraska Tractor Test Results

Test #S912
Download PDF
Test Date: March to April, 2013
Location: IRSTEA, Centre d'Antony, 1 rue Pierre-Gilles de Gennes CS 10030, Antony, France 92761

This section is compiled from original Nebraska Tractor Test PDFs using AI-assisted extraction and human review. For full verification, download the source PDF above. Differences between reports, incomplete source data, and occasional extraction or data entry mistakes can occur.

Maximum Power & Fuel Consumption

Max Power (1 Hour)
152.10 hp
@ 2000 rpm
Rated Engine Speed
136.90 hp
N/A lb/hp·hr
Standard PTO Speed
147.00 hp
@ N/A rpm PTO

Torque Statistics

Maximum Torque 504.6 lb.-ft. (684.1 Nm) at 1200 rpm
Torque Rise 47.3%

PTO Power Curve

157 118 79 39 0 0 hp @ 2145 rpm 0 2145 137 hp @ 2099 rpm 137 2099 118 hp @ 2117 rpm 118 2117 88 hp @ 2126 rpm 88 2126 60 hp @ 2131 rpm 60 2131 30 hp @ 2138 rpm 30 2138 MAX: 136.9 HP ENGINE RPM POWER (HP)

Maximum Power & Fuel Consumption Details

Condition HP kW RPM Fuel gal/hr DEF gal/hr
Maximum Power (1 Hour) 152.10 113.40 2000 8.74 0.41

Varying Power & Fuel Consumption

Click column headers to sort

Power RPM gal/hr lb/hp·hr hp·hr/gal DEF gal/hr
136.90 2099 8.35 0.43 16.40 0.33
117.50 2117 7.20 0.43 16.31 0.30
88.40 2126 5.79 0.46 15.28 0.24
59.50 2131 4.47 0.52 13.33 0.17
29.60 2138 3.14 0.74 9.44 0.12
N/A 2145 1.93 N/A N/A N/A