Massey Ferguson 7485 Specs ( 2004-2012 )
Overview
The Massey Ferguson 7485 is a row-crop tractor manufactured in Beauvais, France, from 2004 to 2012. It is powered by a 6.6L Sisu 6-cylinder turbocharged intercooled diesel engine and features either the DynaStep 21-speed or Dyna-VT infinite transmission. The mechanical configuration includes standard four-wheel drive, a standard cab, and a 118.4-inch wheelbase.
Ideal Applications
Tested Power Output:
According to OECD Tractor Test 2196, the 7485 achieved a maximum tested PTO power of 138.1 hp and a drawbar performance of 100.8 hp.
Hydraulic and Lift Capacity:
The tractor is equipped with a closed-center hydraulic system providing 29 gpm of flow and a Type II/IIIN rear hitch with a lift capacity of 14,283 lbs.
Chassis and Ballasted Weight:
This model has an operating weight of 15,145 lbs and a ballasted weight of 16,865 lbs, utilizing 14.9R28 front and 18.4R38 rear ag tires.
Production
| Description | Row-Crop tractor / Built in Beauvais, France |
|---|---|
| Manufacturer | Massey Ferguson |
Engine
| Engine type | Sisu 6.6L 6-cyl diesel |
|---|---|
| Fuel tank | 93.8 gal (355.0 L) |
| Air cleaner | dual paper elements |
| Bore/Stroke | 4.252x4.724 inches (108 x 120 mm) |
| Compression | 18.5:1 |
| Description | Sisu 66CTA / turbocharged intercooled diesel / 6-cylinder / liquid-cooled |
| Displacement | 402.5 ci (6.6 L) |
| Power | 153 hp (114.1 kW) |
| Rated RPM | 2200 |
| Starter volts | 12 |
| Drawbar (tested) | 100.8 hp (75.2 kW) |
| PTO (claimed) | 130 hp (96.9 kW) |
| PTO (tested) | 138.1 hp (103.0 kW) |
Transmission
| Gears | 21 forward and 18 reverse / infinite forward and reverse (2-range) |
|---|---|
| Oil capacity | 13.2 qts (12.5 L) / 13.2 qts (12.5 L) |
| Transmission | DynaStep / Dyna-VT |
| Transmission type | 21-speed |
Mechanical
| Cab | Cab standard. |
|---|---|
| Description | Power steering / Independent hydraulic wet disc brakes |
| Drive type | Four-wheel drive |
Hydraulics
| Pressure | 2900 psi (200.0 bar) |
|---|---|
| Total flow | 29 gpm (109.8 lpm) |
| Type | closed center |
| Valves | 3 or 4 |
Hitch
| Front Hitch | optional |
|---|---|
| Rear lift (at 24"/610mm) | 14,283 lbs (6478 kg) |
| Rear Type | II/IIIN |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 540/540E/1000 |
Electrical
| Batteries | 2 |
|---|---|
| Battery CCA | 505 |
| Charging amps | 120 |
Dimensions & Tires
| Ballasted weight | 16,865 lbs (7649 kg) |
|---|---|
| Ground clearance | 14 inches (35 cm) |
| Height | 122 inches (309 cm) |
| Length | 205.9 inches (522 cm) |
| Operating weight | 15,145 lbs (6869 kg) |
| Wheelbase | 118.4 inches (300 cm) |
| Width | 80 inches (203 cm) |
| Front tire | 14.9R28 |
| Rear tire | 18.4R38 |
| Weight | 15,145 lbs (6869 kg) |
| Wheelbase | 118.4 inches (300 cm) |
| Ag front | 14.9R28 |
| Ag rear | 18.4R38 |
Massey Ferguson 7485 attachments
| Description | front-end loader |
|---|
OCED Tractor Test 2196
| Description | Diesel Dyna Step 4WDDecember 1 - May 1, 2003 / PTO performance / Drawbar performance |
|---|---|
| Fuel use | 7.8 gal/hour (29.5 l/hour) / 8.4 gal/hour (31.8 l/hour) / 8.2 gal/hour (31.0 l/hour) / 8.4 gal/hour (31.8 l/hour) |
| Max power | 138.1 hp (103.0 kW) / 100.8 hp (75.2 kW) |
| Power at rated engine speed | 127.9 hp (95.4 kW) |
| Power at rated PTO speed | 136.5 hp (101.8 kW) |
Variants
| 6485 | Dyna-6 |
|---|---|
| 7485 | Dyna-VT |
Nebraska Tractor Test Results
Test #S613
Test Date:
N/A
Location:
Groupement d'Antony, Parc de Touvoie, BP 44 Antony, France 92163
This section is compiled from original Nebraska Tractor Test PDFs using AI-assisted extraction and human review. For full verification, download the source PDF above. Differences between reports, incomplete source data, and occasional extraction or data entry mistakes can occur.
No PTO performance data available.