Massey Ferguson 6716S Specs ( 2017-2021 )
Overview
The Massey Ferguson 6716S is a utility farm tractor produced between 2017 and 2021, powered by an AGCO Power 4.9L 4-cylinder intercooled turbocharged diesel engine. This four-wheel drive model is built on a 105.1-inch wheelbase and features a Category III rear hitch with a lift capacity of 11,244 lbs.
Ideal Applications
Production
| Description | Utility tractor |
|---|---|
| Manufacturer | Massey Ferguson (a part of AGCO) |
Engine
| Engine type | AGCO Power 4.9L 4-cyl diesel |
|---|---|
| Exhaust fluid (DEF) | 7.9 gal (29.9 L) |
| Fuel tank | 67 gal (253.6 L) |
| Bore/Stroke | 4.252x5.276 inches (108 x 134 mm) |
| Description | AGCO Power 49 AWF / intercooled turbocharged diesel / 4-cylinder 16-valve / liquid-cooled inline |
| Displacement | 299 ci (4.9 L) |
| Emission control | SCR/DEF/DOC |
| Emissions | Stage V |
| Fuel system | high-pressure common rail direct injection |
| Maximum Power | 160 hp (119.3 kW) |
| Power | 150 hp (111.9 kW) |
| Rated RPM | 2100 |
| Starter | electric |
| Starter volts | 12 |
| Torque | 583 lb-ft (790.5 Nm) |
| Torque RPM | 1500 |
| Drawbar (tested) | 128.1 hp (95.5 kW) |
| PTO (claimed) | 140 hp (104.4 kW) |
| PTO (tested) | 138.4 hp (103.2 kW) |
Transmission
| Clutch | wet disc / wet disc |
|---|---|
| Gears | 16 forward and reverse / 24 forward and reverse / infinite forward and reverse |
| Transmission | Dyna-4 / Dyna-6 / Dyna-VT |
| Type | four-speed power shift / six-speed power shift / continuously variable transmission (CVT) |
| Description | continuously variable transmission (CVT) |
| Transmission type | 16-speed four-speed power shift / 24-speed six-speed power shift |
| Description | continuously variable transmission (CVT) |
| Transmission type | 16-speed four-speed power shift / 24-speed six-speed power shift |
Mechanical
| Cab | Cab standard with air-conditioning. Available cab suspension. |
|---|---|
| Description | Power steering / Hydraulic wet disc brakes |
| Differential lock | electro-hydraulic front and rear |
| Drive type | Four-wheel drive |
| Trailer brakes | pneumatic OptOptional |
Hydraulics
| Front valves | 2 OptOptional |
|---|---|
| Pressure | 2900 psi (200.0 bar) |
| Pump flow | 26.4 gpm (open) (99.9 lpm) |
| Rear valves | 5 OptOptional |
| Type | open center |
Hitch
| Rear lift (at 24"/610mm) | 11244 lbs (5100 kg) |
|---|---|
| Rear Type | III |
PTO
| Clutch | electro-hydraulic |
|---|---|
| Engine RPM | 540E@1530 / 1000@1920 |
| Front PTO | independent OptOptional |
| Front PTO Type | 1000 |
| Rear PTO | independent |
| Rear PTO Type | 540/1000 (1.375) |
Electrical
| Battery volts | 12 |
|---|---|
| Charging amps | 175 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Description | Flange rear axle / Bar rear axle |
|---|---|
| Height (cab) | 118.9 inches (302 cm) |
| Length | 194 inches (492 cm) |
| Weight | 15432 lbs (6999 kg) |
| Wheelbase | 105.1 inches (266 cm) |
| Width | 72 inches*Minimum (182 cm) |
| Weight | 15432 lbs (6999 kg) |
| Wheelbase | 105.1 inches (266 cm) |
OCED Tractor Test 3035
| Description | Diesel Dyna-VT 4WDOctober 2016 - November 2016, Link: OCED Tractor Test 3035 file / PTO performance / Drawbar performance / Pull at 7.69KPH / Pull at 3.57KPH |
|---|---|
| Fuel use | 8.5 gal/hour (32.2 l/hour) / 8.9 gal/hour (33.7 l/hour) / 9.1 gal/hour (34.4 l/hour) |
| Max power | 128.1 hp (95.5 kW) |
| Max pull | 15265 lbs (6924 kg) |
| Power at rated engine speed | 138.4 hp (103.2 kW) |
| Power at rated PTO speed | 153.5 hp (114.5 kW) |
References
| Description | 6700S Series published in 2016, by Massey Ferguson / MF 6700 S published in 2018, by Massey Ferguson / MF 6700 S published in 2019, by Massey Ferguson |
|---|
Variants
| MT495E | similar Challenger model |
|---|
Nebraska Tractor Test Results
Test #1123This section is compiled from original Nebraska Tractor Test PDFs using AI-assisted extraction and human review. For full verification, download the source PDF above. Differences between reports, incomplete source data, and occasional extraction or data entry mistakes can occur.
Maximum Power & Fuel Consumption
Torque Statistics
| Maximum Torque | 485 lb-ft (658 Nm) |
|---|---|
| Torque Rise | 40.1% |
PTO Power Curve
Maximum Power & Fuel Consumption Details
| Condition | HP | kW | RPM | Fuel gal/hr | Fuel L/hr | DEF gal/hr | DEF L/hr |
|---|---|---|---|---|---|---|---|
| Maximum Power (1 Hour) | 153.50 | 114.50 | 1904 | 8.93 | 33.80 | 0.61 | 2.30 |
Varying Power & Fuel Consumption
Click column headers to sort
| Power | RPM | gal/hr | lb/hp·hr | hp·hr/gal | DEF gal/hr |
|---|---|---|---|---|---|
| 138.40 | 2099 | 8.48 | 0.43 | 16.32 | 0.57 |
| 118.40 | 2112 | 7.35 | 0.43 | 16.12 | 0.40 |
| 89.20 | 2126 | 5.96 | 0.47 | 14.97 | 0.31 |
| 59.70 | 2132 | 4.44 | 0.52 | 13.45 | 0.22 |
| 30.00 | 2141 | 3.00 | 0.70 | 10.00 | 0.11 |
| 0 | 2148 | 1.83 | N/A | N/A | 0.06 |