Massey Ferguson 4840 Specs ( 1978-1983 )

Compare Tractor

Overview

The Massey Ferguson 4840 is a four-wheel drive farm tractor manufactured between 1978 and 1983, powered by a 14.8L Cummins V-903 8-cylinder diesel engine. The machine features articulated power steering, a Category IV rear hitch with an 11,000-pound lift capacity, and was available with either an 18-speed partial power shift or a 12-speed gear transmission. During its production run, it reached a shipping weight of 27,000 pounds and carried an original price of $98,000 in 1983.

Ideal Applications

Tested Drawbar and PTO Performance: According to Nebraska Tractor Test 1343, the 4840 achieved a maximum drawbar pull of 28,191 pounds and a tested PTO power output of 210.67 horsepower at rated engine speed.
High-Capacity Fluid and Fuel Storage: The tractor is equipped with a 190-gallon fuel tank and a steering system reservoir with a 96-quart capacity to support its articulated power steering and hydraulic requirements.
Mechanical Drive and Weight Specifications: This 4WD model utilizes planetary final drives and 4-inch diameter axles to manage an operating weight of 30,920 pounds when equipped with 23.1-34 dual tires.

Production

Description Original price was $98,000 in 1983
Drive type Four-wheel Drive (4WD) tractor
Manufacturer Massey Ferguson

Engine

Engine type Cummins 14.8L 8-cyl diesel
Air cleaner dual dry elements
Bore/Stroke 5.50x4.75 inches (140 x 121 mm)
Compression 15.5:1
Coolant capacity 60 qts (56.8 L)
Description Cummins V-903 / diesel / 8-cylinder / liquid-cooled
Displacement 903 ci (14.8 L)
Oil capacity 37.5 qts (35.5 L)
Power (net) 265 hp (197.6 kW)
Starter volts 12
Drawbar (claimed) 170 hp (126.8 kW)
Drawbar (tested) 179.65 hp (134.0 kW)
Engine (net) 265 hp (197.6 kW)
PTO (claimed) 211 hp (157.3 kW)
PTO (tested) 210.67 hp (157.1 kW)

Transmission

Clutch wet disc with four 14-inch plates
Description Three gears (1-3) in two ranges (high/low) with three-speed power shift (low/intermediate/high). / Four gears in three ranges, plus reverse range.
Gears 18 forward and 6 reverse / 12 forward and 4 reverse
Oil capacity 44 qts (41.6 L)
Type partial power shift / gear
Transmission type 18-speed partial power shift / 12-speed gear
Transmission type 18-speed partial power shift / 12-speed gear

Mechanical

Cab Cab standard with heat and air-conditioning. Optional AM/FM 8-track stereo.
Description Articulated power steering / Hydraulic caliper brakes
Drive type Four-wheel drive
Final drives planetary

Capacity

Front axle 42 qts (39.7 L)
Fuel 190 gal (719.1 L)
Rear axle 84 qts (79.5 L)
Steering 96 qts (90.9 L)

Hydraulics

Pump flow 16 gpm (transmission) (60.6 lpm)
Steering cap. 96 qts (90.9 L)
Total flow 60 gpm (227.1 lpm)
Type open center
Valves 3 to 4

Hitch

Control position control with electronic lower link sensing
Rear lift (at 24"/610mm) 11000 lbs (4989 kg)
Rear Type IV

PTO

Engine RPM 1000@2350
Rear PTO independent
Rear PTO Type 1000 (1.75)

Electrical

Batteries 4
Battery volts 12
Charging amps 60
Charging system alternator
Ground negative

Dimensions & Tires

Front axle 4 inch diameter (101 mm)
Height 130 inches (330 cm)
Length 252 inches (640 cm)
Rear axle 4 inch diameter (101 mm)
Wheelbase 137 inches (347 cm)
Width 108 inches (274 cm)
Front tire 23.1-34
Rear tire 23.1-34
Weight 27000 to 30920 pounds
Wheelbase 137 inches (347 cm)
Ag front 23.1-34 / 18.4-38
Ag rear 23.1-34 / 18.4-38

4840 Serial Numbers

1978 9D001001
1979 9D001031
1980 9D002102
1981 9D002752
1982 9D003515
1983 9D003897
Description FAQ: How to read a serial number table.
Location: Rear, right-side of cab

Massey Ferguson 4840 Weight

Max capacity 34000 lbs (15422 kg)
Operating 30920 lbs (23.1-34 duals) (14025 kg)
Shipping 27000 lbs (12247 kg)

Nebraska Tractor Test 1343

Description Diesel 18-speed 4WDApril 16 - May 6, 1980Link: Nebraska Tractor Test 1343 file / PTO performance / Drawbar performance / Gear 2L-L used for power test. / Gear 1L-L used for pull test.
Fuel use 14.5 gal/hour (54.9 l/hour) / 13.5 gal/hour (51.1 l/hour) / 14.5 gal/hour (54.9 l/hour)
Max power 179.65 hp (134.0 kW)
Max pull 28,191 lbs (12787 kg)
Power at rated engine speed 210.67 hp (157.1 kW)
Power at rated PTO speed 210.61 hp (157.1 kW)

References

Drive type MF 4000 Series 4-Wheel Drives published in 1979, by Massey Ferguson / MF 4000 Series 4-Wheel Drives published in 1984, by Massey Ferguson / Product Information Manual MF4840-MF4880 4 Wheel Drive Tractors published in 1978, by Massey Ferguson

Speeds

Description With 23.1x34 duals. / With 23.1-34 tires.