Home / LS / MT352

LS MT352 Specs ( 2020-Present )

Compare Tractor

Overview

The LS MT352 is a 52 hp compact utility tractor in production since 2020, featuring a turbocharged 1.9L 3-cylinder diesel engine. This four-wheel drive model is available in four variants including ROPS and Cab configurations with either 16-speed synchro shuttle or 3-range hydrostatic transmissions.

Ideal Applications

Engine and Power Output: The liquid-cooled LS engine is rated at 2600 RPM, producing 123.2 lb-ft of torque at 1600 RPM with claimed PTO power reaching 44.2 hp for gear models and 41.6 hp for hydrostatic versions.
Hydraulic and Hitch Capacity: Equipped with an open center hydraulic system and three valves, the Category I rear hitch provides a lift capacity of 2,469 lbs at 24 inches and 2,756 lbs at the ends.
Chassis and Weight Configurations: The tractor's operating weight ranges from 3,869 lbs for the ROPS gear variant to 4,446 lbs for the Cab hydro variant, supported by a 73.2-inch wheelbase and multiple tire options including ag, industrial, and turf.

Production

Description Compact Utility tractor
Manufacturer LS

Engine

Cab Fuel tank 12.4 gal (46.9 L)
Engine type LS 1.9L 3-cyl diesel
ROPS Fuel tank 10.6 gal (40.1 L)
Bore/Stroke 3.465x4.055 inches (88 x 103 mm)
Compression 17:1
Description LS L3C19-T8 / turbocharged diesel / 3-cylinder / liquid-cooled
Displacement 114.7 ci (1.9 L)
Emissions Tier IV
Fuel system common rail direct injection
Power (gross) 52 hp (38.8 kW)
Rated RPM 2600
Starter electric
Starter volts 12
Torque 123.2 lb-ft (167.1 Nm)
Torque RPM 1600
Engine (gross) 52 hp (38.8 kW)
Gear PTO (claimed) 44.2 hp (33.0 kW)
Hydro PTO (claimed) 41.6 hp (31.0 kW)

Transmission

Gears 16 forward and reverse / infinite forward and reverse (3-range)
Type synchro shuttle / hydrostatic
Description hydrostatic
Transmission type 16-speed synchro shuttle
Description hydrostatic
Transmission type 16-speed synchro shuttle

Mechanical

Cab Two-post folding ROPS. Cab optional.
Description Power steering / Wet disc brakes
Drive type Four-wheel drive

Hydraulics

Cab hydro Steering flow 6.9 gpm (26.1 lpm)
Cab hydro Total flow 15 gpm (56.8 lpm)
Gear Steering flow 4.1 gpm (15.5 lpm)
Pressure 2466 psi (170.0 bar)
Pump flow 8.2 gpm (31.0 lpm)
ROPS hydro Steering flow 6.2 gpm (23.5 lpm)
ROPS hydro Total flow 14.3 gpm (54.1 lpm)
ROPS shuttle Total flow 12.3 gpm (46.6 lpm)
Steering press. 2062 psi (142.2 bar)
Type open center
Valves 3

Hitch

Control position and draft control
Rear lift (at 24"/610mm) 2469 lbs (1119 kg)
Rear lift (at ends) 2756 lbs (1250 kg)
Rear Type I

PTO

Engine RPM 540@2409 / 2000@2562
Mid PTO independent OptOptional
Mid PTO Type 2000
Rear PTO independent
Rear PTO Type 540 (1.375)

Electrical

Battery volts 12
Charging amps 70
Charging system alternator
Charging volts 12
Ground negative

Dimensions & Tires

Height (cab) 90 inches (228 cm)
Height (ROPS) 95 inches (241 cm)
Length 133 inches (337 cm)
Wheelbase 73.2 inches (185 cm)
Width 62.5 inches (158 cm)
Front tire 9.5-16
Rear tire 13.6-24
Weight 3869 to 4446 pounds
Wheelbase 73.2 inches (185 cm)
Industrial front 12-16.5
Industrial rear 17.5L-24
Lawn/turf front 28x8.5-15
Lawn/turf rear 41x14-20
Standard tires (ag) Front: 9.5-16. Rear: 13.6-24

LS MT352 Weight

Cab gear 4380 lbs (1986 kg)
Cab hydro 4446 lbs (2016 kg)
ROPS gear 3869 lbs (1754 kg)
ROPS hydro 3935 lbs (1784 kg)

LS MT352 attachments

Description front-end loader / backhoe

References

Description MT3 Series published in 2020, by LS

Variants

MT352 ROPS shuttle
MT352C Cab shuttle
MT352H ROPS hydro
MT352HC Cab hydro