Home / Leyland / 455

Leyland 455 Specs ( 1978-Present )

Compare Tractor

Overview

The Leyland 455 is a utility farm tractor produced from 1978 to the present, configured as a 255 model with a four-wheel drive system installed by Four Wheel Traction Ltd. It features a 3.6L four-cylinder diesel engine rated at 2200 RPM and a 10-speed gear transmission with two ranges. Equipment includes an open center hydraulic system with a 7.9 gpm flow rate and a Category II/I rear hitch.

Ideal Applications

Engine and Mechanical Configuration: The tractor is powered by a liquid-cooled Leyland 3.6L diesel engine with a 17.8:1 compression ratio and is equipped with power assist steering and mechanical dry disc brakes.
Transmission and Driveline Layout: The driveline consists of a 10-speed gear transmission with five gears in two ranges, providing ten forward and two reverse speeds through a mechanical dry disc clutch.
Hitch and PTO Specifications: This model is equipped with an independent 540 RPM rear PTO and a rear hitch with position and draft control, supported by a 7.9 gpm hydraulic pump flow.

Production

Description Utility tractor
Drive type The Leyland 455 was a 255 with a four-wheel drive system installed by Four Wheel Traction Ltd.
Manufacturer Leyland

Engine

Description Image courtesy of Van Osgood
Engine type Leyland 3.6L 4-cyl diesel
Air cleaner dry
Bore/Stroke 3.858x4.921 inches (98 x 125 mm)
Compression 17.8:1
Description Leyland / diesel / 4-cylinder / liquid-cooled
Displacement 222 ci (3.6 L)
Rated RPM 2200
Starter volts 12

Transmission

Clutch mechanical dry disc
Description Five gears (1-5) plus reverse (R) in two ranges (low/high).
Gears 10 forward and 2 reverse
Transmission type 10-speed gear
Type gear

Mechanical

Description Mechanical dry disc brakes
Drive type Four-wheel drive
Steering power assist

Hydraulics

Pump flow 7.9 gpm (29.9 lpm)
Type open center

Hitch

Control position and draft control
Rear Type II/I

PTO

Rear PTO independent
Rear PTO Type 540

455 Serial Number Location

Description Serial number plate on the left side of the tractor frame.