Home / John Deere / 9360R

John Deere 9360R Specs ( 2012-2014 )

Compare Tractor

Overview

The John Deere 9360R is a four-wheel drive farm tractor produced in Waterloo, Iowa, between 2012 and 2014 with an initial price of $280,427. It is equipped with a 9.0L 6-cylinder diesel engine and was available with either a 24-speed partial power shift or an 18-speed full power shift transmission.

Ideal Applications

Tested Drawbar and PTO Performance: According to OECD Tractor Test 2030, this model achieved a maximum drawbar power of 279.64 hp and a maximum PTO power of 346.07 hp while consuming up to 19.2 gallons of fuel per hour.
Heavy-Duty Hitch and Hydraulic Configuration: The tractor features a Category 4N/3 rear hitch with a 15,300-pound lift capacity and a closed center pressure flow compensated hydraulic system providing a pump flow of 44 gpm.
Chassis and Physical Footprint: The 9360R is built on a 137.8-inch wheelbase with an operating weight of 37,705 pounds and utilizes 620/70R42 tires on both the front and rear axles.

Production

Description Built in Waterloo, Iowa, USA / Original price was $280,427 in 2014
Drive type Four-wheel Drive (4WD) tractor
Manufacturer John Deere

Engine

Engine type John Deere 9.0L 6-cyl diesel
Fuel tank 350 gal (1324.8 L)
Drawbar (tested) 279.64 hp (208.5 kW)
Engine (gross) 360 hp (268.5 kW)
Engine (max) 396 hp (295.3 kW)
PTO (claimed) 287 hp (214.0 kW)
PTO (tested) 346.07 hp (258.1 kW)

Transmission

Transmission type 24-speed partial power shift / 18-speed full power shift

Mechanical

Description Hydraulic wet disc brakes / CommandView II cab standard with air-conditioning.
Differential lock fully-locking electro-hydraulic
Drive type Four-wheel drive
Final drives inboard planetary
Steering hydraulic power
Trailer brakes hydraulic optional

Hydraulics

Pressure 2900 psi (200.0 bar)
Pump flow 44 gpm (166.5 lpm)
SCV flow 37 gpm (140.0 lpm)
Type closed center pressure flow compensated
Valves 4 to 6

Hitch

Control electronic draft sensing
Drawbar Category 4 standard with optional heavy-duty support . Optional Category 5 with heavy-duty support rated at 5,440 kg. (2,470 kg)
Rear lift 15,300 lbs (6940 kg)
Rear Type 4N/3

PTO

Rear PTO independent OptOptional
Rear PTO Type 1000 (1.75)

Electrical

Batteries 3
Battery CCA 925
Battery volts 12
Charging amps 200
Charging system alternator
Charging volts 12
Ground negative

Dimensions & Tires

Front axle 4.33 by 120 inches (109 by 3048 mm) / 4.72 by 120 inches ( (119 by 3048 mm)
Length 282 inches (716 cm)
Rear axle 4.33 by 120 inches (109 by 3048 mm) / 4.72 by 120 inches (optional) (119 by 3048 mm)
Wheelbase 137.8 inches (350 cm)
Width 120 inches (304 cm)
With hitch Length 295 inches (749 cm)
Front tire 620/70R42
Rear tire 620/70R42
Weight 34420 to 37705 pounds
Wheelbase 137.8 inches (350 cm)
Ag front 620/70R42
Ag rear 620/70R42

9360R Serial Number Location

Description Serial number plate on the front-right of the tractor frame, ahead of the front axle.

John Deere 9360R Height

Cab 143 inches (363 cm)
Exhaust 175 inches (444 cm)
Hood 106 inches (269 cm)

John Deere 9360R Weight

Max capacity 38553 lbs (17487 kg)
Operating 37705 lbs (480/80R46 duals) (17102 kg)
Shipping 34420 lbs (15612 kg)

OCED Tractor Test 2030

Description Diesel 18-speed 4WDMay 22 - June 4, 2012Link: OCED Tractor Test 2030 file / PTO performance / Drawbar performance / Gear 7 used for power test. / Gear 1 used for pull test.
Fuel use 19.2 gal/hour (72.7 l/hour) / 17.5 gal/hour (66.2 l/hour) / 19.1 gal/hour (72.3 l/hour) / 17.8 gal/hour (67.4 l/hour)
Max power 346.07 hp (258.1 kW) / 279.64 hp (208.5 kW)
Max pull 36076 lbs (16364 kg)
Power at rated engine speed 309.30 hp (230.6 kW)
Power at rated PTO speed 344.13 hp (256.6 kW)