John Deere 9200 Specs ( 1996-2001 )
Overview
The John Deere 9200 is a four-wheel drive farm tractor produced in Waterloo, Iowa, between 1996 and 2001. It features a 10.5L 6-cylinder turbocharged aftercooled diesel engine and was available with multiple transmission configurations including a 12-speed full power shift and a 24-speed partial power shift. The unit is equipped with a 270-gallon fuel tank and a Category III rear hitch with a 13,871-lb lift capacity.
Ideal Applications
Tested Power and Drawbar Performance:
OCED Tractor Test 1731 recorded a maximum PTO power of 296.92 hp and a maximum drawbar pull of 34,057 lbs while utilizing a 24-speed transmission.
Transmission and Drive Configuration:
The mechanical layout includes four-wheel drive, inboard planetary final drives, and options for a 12-speed partially synchronized, 24-speed partial power shift, or 12-speed full power shift transmission.
Physical Dimensions and Capacity:
This tractor has a 137.8-inch wheelbase and a shipping weight of 31,015 lbs, with a hydraulic system capacity of 26 gallons and a 140-amp charging system.
Production
| Description | Built in Waterloo, Iowa, USA |
|---|---|
| Drive type | Four-wheel Drive (4WD) tractor |
| Manufacturer | John Deere |
Engine
| Engine type | John Deere 10.5L 6-cyl diesel |
|---|---|
| Bore/Stroke | 5.00x5.43 inches (127 x 138 mm) |
| Compression | 16:1 |
| Coolant capacity | 56 qts (53.0 L) |
| Description | John Deere / turbocharged aftercooled diesel / 6-cylinder / liquid-cooled inline |
| Displacement | 643 ci (10.5 L) |
| Power | 310 hp (231.2 kW) |
| Rated RPM | 2100 |
| Oil capacity | 44 qts (41.6 L) |
| Drawbar (tested) | 246.46 hp (183.8 kW) |
| PTO (claimed) | 260 hp (193.9 kW) |
| PTO (tested) | 296.92 hp (221.4 kW) |
Transmission
| Description | Three speeds (1-3 and reverse) in four ranges (A-D). Synchronized shifting between speeds using the clutch. Tractor must be stopped, and clutch used, to shift ranges. Reverse is not available in the highest (D) range. / Three speeds (1, 2, 3 and reverse) in four ranges (A-D) plus high-low power shift. Speeds and ranges may be shifted on the move, using the clutch. High-low power shift for each speed using lever. |
|---|---|
| Gears | 12 forward and 3 reverse / 24 forward and 6 reverse / 12 forward and 2 reverse |
| Oil capacity | 147.2 qts (100mm axle) (139.3 L) / 147.2 qts (100mm axle) (139.3 L) / 64 qts (60.6 L) |
| Transmission | John Deere Syncro / John Deere PowrSync / John Deere PowerShift |
| Type | partially synchronized / partial power shift / full power shift |
| Transmission type | 12-speed partially synchronized / 24-speed partial power shift / 12-speed full power shift |
| Transmission type | 12-speed partially synchronized / 24-speed partial power shift / 12-speed full power shift |
Mechanical
| Cab | Cab standard. |
|---|---|
| Description | Hydraulic wet disc brakes |
| Drive type | Four-wheel drive |
| Final drives | inboard planetary |
| Steering | hydrostatic power |
Capacity
| Fuel | 270 gal (1022.0 L) |
|---|---|
| Hydraulic system | 26 gal (98.4 L) |
Hydraulics
| Capacity | 26 gal (98.4 L) |
|---|---|
| Pressure | 2900 psi (200.0 bar) |
| Pump flow | 35 gpm (132.5 lpm) |
| Total flow | 44 gpm (166.5 lpm) |
| Type | closed center PFC |
| Valves | 3 to 5 |
Hitch
| Rear lift | 13,871 lbs (6291 kg) |
|---|---|
| Rear Type | III |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 1000 (optional) |
Electrical
| Batteries | 3 |
|---|---|
| Battery CCA | 925 |
| Battery volts | 12 |
| Charging amps | 140 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Front axle | 3.94 by 120 inches (100 by 3048 mm) / 4.31 by 120 inches (109 by 3048 mm) |
|---|---|
| Ground clearance | 28.8 inches (axles) (73 cm) |
| Height (cab) | 137.5 inches (349 cm) |
| Length | 274 inches (695 cm) |
| Rear axle | 3.94 by 120 inches (100 by 3048 mm) / 4.31 by 120 inches (109 by 3048 mm) |
| Shipping weight | 31,015 lbs (14068 kg) |
| Wheelbase | 137.8 inches (350 cm) |
| Width | 158 inches (duals) (401 cm) |
| Front tire | 20.8R42 |
| Rear tire | 20.8R42 |
| Weight | 31,015 lbs (14068 kg) |
| Wheelbase | 137.8 inches (350 cm) |
| Ag front | 20.8R42 |
| Ag rear | 20.8R42 |
9200 Serial Number Location
| Description | Serial number plate on the top-left of the tractor's hinge |
|---|
9200 Serial Numbers
| 1997 | 1001 |
|---|---|
| 1998 | 10001 |
| 1999 | 20001 |
| 2000 | 30001 |
| 2001 | 40001 |
| Description | FAQ: How to read a serial number table. |
OCED Tractor Test 1731
| Description | Diesel 24-speed 4WDApril 24 - May 15, 1997Link: OCED Tractor Test 1731 file / PTO performance / Drawbar performance |
|---|---|
| Fuel use | 16.2 gal/hour (61.3 l/hour) / 15.3 gal/hour (57.9 l/hour) / 16.2 gal/hour (61.3 l/hour) / 15.5 gal/hour (58.7 l/hour) |
| Max power | 296.92 hp (221.4 kW) / 246.46 hp (183.8 kW) |
| Max pull | 34057 lbs (15448 kg) |
| Power at rated engine speed | 265.72 hp (198.1 kW) |
| Power at rated PTO speed | 296.92 hp (221.4 kW) |
References
| Description | New 9000 Series Tractors published in 1996, by John Deere / Typical Questions & Answers - 9000 Series 4WD Tractor Engines published in 1996, by John Deere / The New World Power - 9000 Series Tractors published in 1996, by John Deere / 9000 Series Tractors Product Information Handbook published in 1998, by John Deere / 9000/9000T Series Tractors Product Information Handbook published in 1999, by John Deere |
|---|
Speeds
| Description | With 20.8R42 tires. / With 20.8R42 tires. / With 20.8R42 tires. |
|---|