John Deere 7020 Specs ( 1971-1975 )

Compare Tractor

Overview

The John Deere 7020 is a four-wheel drive farm tractor produced in Waterloo, Iowa, between 1971 and 1975, with a total production run of 2,586 units. It features a 6.6L 6-cylinder turbocharged intercooled diesel engine and was offered with either an 8-speed or 16-speed Synchro-Range transmission. Standard equipment includes a cab, hydrostatic power steering, and a 1000 RPM rear PTO.

Ideal Applications

Tested Power Output: According to Nebraska Tractor Test 1063, the 7020 achieved a maximum drawbar power of 127.72 hp and a maximum pull of 18,726 lbs while utilizing Gear 1-Hi for the pull test.
Engine and Fluid Capacities: The liquid-cooled diesel engine is supported by a 156-gallon fuel tank, a 32-quart coolant system, and a 17-quart oil capacity to manage its 2200 rated RPM operation.
Transmission and Chassis Configuration: The 18,495 lb vehicle is built on a 120-inch wheelbase and utilizes a partially synchronized transmission system alongside a 26 gpm closed-center hydraulic pump.

Production

Description Built in Waterloo, Iowa, USA / Original price was $22,000 in 1975
Drive type Four-wheel Drive (4WD) tractor
Manufacturer John Deere
Total built 2,586

Engine

Engine type John Deere 6.6L 6-cyl diesel
Air cleaner dual paper elements with pre-cleaner
Bore/Stroke 4.25x4.75 inches (108 x 121 mm)
Compression 15.7:1
Coolant capacity 32 qts (30.3 L)
Description John Deere / turbocharged intercooled diesel / 6-cylinder / liquid-cooled
Displacement 404 ci (6.6 L)
Firing order 1-5-3-6-2-4
Oil capacity 17 qts (16.1 L)
Rated RPM 2200
Starter volts 12
Drawbar (tested) 127.72 hp (95.2 kW)
PTO (tested) 146.17 hp (109.0 kW)

Transmission

Description Eight-speed Deere Synchro-Range transmission with added high and low gears.
Gears 8 forward and 2 reverse / 16 forward and 4 reverse
Oil capacity 88 qts (83.3 L)
Transmission Syncro-Range / Syncro-Range Hi-Lo
Type partially synchronized / partially synchronized
Transmission type 8-speed partially synchronized / 16-speed partially synchronized
Transmission type 8-speed partially synchronized / 16-speed partially synchronized

Mechanical

Cab Cab standard
Drive type Four-wheel drive
Steering hydrostatic power

Capacity

Fuel 156 gal (590.5 L)
Hydraulic system 22 gal (83.3 L)

Hydraulics

Capacity 22 gal (83.3 L)
Pump flow 26 gpm (98.4 lpm)
Type closed center
Valves 2 (early)

PTO

Rear PTO transmission
Rear PTO Type 1000

Electrical

Batteries 2
Battery volts 6
Charging system Motorola alternator *Early
Ground negative

Dimensions & Tires

Weight 18,495 lbs (8389 kg)
Wheelbase 120 inches (304 cm)
Front tire 18.4-34S
Rear tire 18.4-34S
Weight 18,495 lbs (8389 kg)
Wheelbase 120 inches (304 cm)
Ag front 18.4-34S
Ag rear 18.4-34S

7020 Serial Number Location

Description Serial number plate on the rear of the tractor, above the PTO.

7020 Serial Numbers

1971 773R001000
1972 773R002007
1973 773R002548
1974 773R003122
1975 773R003542
Description FAQ: How to read a serial number table.
Final 773R003708

Nebraska Tractor Test 1063

Description Diesel 16-speed 4WDApril 20 - May 4, 1971Link: Nebraska Tractor Test 1063 file / PTO performance / Drawbar performance / Gear 4-Lo used for power test. / Gear 1-Hi used for pull test.
Fuel use 10.2 gal/hour (38.6 l/hour) / 10.0 gal/hour (37.9 l/hour)
Max power 127.72 hp (95.2 kW)
Max pull 18,726 lbs (8494 kg)
Power at rated engine speed 146.17 hp (109.0 kW)

References

Description The John Deere 20 Series New Generation Tractors by Benjamin Hain