Home / John Deere / 40C

John Deere 40C Specs ( 2005-2015 )

Compare Tractor

Production

Description Compact Utility tractor / Built in Italy
Distributor John Deere
Manufacturer Goldini
Total built 11,814

Engine

Engine type Lombardini 1.7L 3-cyl diesel
Fuel tank 10.6 gal (40.1 L)
Air cleaner dry
Bore/Stroke 3.46x3.56 inches (88 x 90 mm)
Compression 6.5:1 / 6.5:1
Coolant capacity 6.3 qts (6.0 L)
Description Lombardini LDW 1603 / diesel / 3-cylinder / liquid-cooled
Displacement 100.7 ci (1.7 L)
Firing order 1-2 / 1-2
Fuel system indirect injection
Oil capacity 4.2 qts (4.0 L)
Point gap 0.022 inches (0.559 mm) / 0.022 inches (0.559 mm)
Rated Power (gross) 38 hp (28.3 kW)
Rated RPM 2800
Sparkplug gap 0.025 inches (0.635 mm) / 0.025 inches (0.635 mm)
Starter electric
Starter volts 12
Torque 76.7 lb-ft (104.0 Nm)
Torque RPM 1650
Engine type John Deere 1.6L 2-cyl gasoline / John Deere 1.6L 2-cyl all-fuel
Engine type John Deere 1.6L 2-cyl gasoline / John Deere 1.6L 2-cyl all-fuel
Fuel tank 11 gal (41.6 L)
Belt (claimed) 21.24 hp (15.8 kW)
Belt (tested) 25.0 hp (18.6 kW)
Drawbar (claimed) 15.11 hp (11.3 kW)
Drawbar (tested) 19.63 hp (14.6 kW)
Engine (gross) 38 hp (28.3 kW)

Transmission

Clutch mechanical dry disc
Gears 12 forward and reverse
Oil capacity 25.4 qts (24.0 L)
Transmission John Deere
Transmission type 12-speed synchronized
Type synchronized

Mechanical

Cab Open operator station.
Description Power steering / Hydraulic wet disc brakes / Two-post mid-mount folding ROPS.
Drive crawler
Drive type Four-wheel drive
Steering manual clutches

Hydraulics

Pressure 2176 psi (150.0 bar)
Pump flow 8.7 gpm (32.9 lpm)

Hitch

Rear lift (at 24"/610mm) 2205 lbs (1000 kg)
Rear lift (at ends) 3086 lbs (1399 kg)
Rear Type I/IN

PTO

Engine RPM 540@2520
Rear PTO independent
Rear PTO Type 540/1000

Electrical

Battery volts 12
Charging amps 45
Charging system alternator
Ground negative

Dimensions & Tires

Front tread 33.4 to 47.5 inches (84 to 120 cm)
Height (ROPS) 78.7 inches (199 cm)
Length 120.8 inches (306 cm)
Rear tread 35.1 to 49.9 inches (89 to 126 cm)
Weight 3351 lbs (1520 kg)
Wheelbase 63.6 inches (161 cm)
Width 43.4 inches*Minimum width (110 cm)
Front tire 200/70R16
Rear tire 320/70R24
Weight 3351 lbs (1520 kg)
Wheelbase 63.6 inches (161 cm)
Standard tires (ag) Front: 200/70R16. Rear: 320/70R24

40C Serial Number Location

Description Left side of tractor, behind bell housing

40C Serial Numbers

1953 60001
1954 62264
1955 66020
Description FAQ: How to read a serial number table.
Final 71689

Belt Pulley

Diameter 9.1 inches (23 cm)
RPM 1267
Speed 3006 ft/min (916.23 meters/min)
Width 6.125 inches (15 cm)

Dimensions & Tracks

Description 12-inch tracks
Weight 4500 to 6000 pounds
Wheelbase 56 inches (142 cm)

John Deere 40C Tracks

Width 12 inches (30 cm) / 10 inches (25 cm) / 14 inches (35 cm)

Links

Description JD40C: Information and photos about the 40C

Nebraska Tractor Test 505

Belt fuel use (max) 2.4 gal/hour (9.1 l/hour)
Belt power (max) 25.0 hp (18.6 kW)
Description Gasoline 4-speed crawlerSeptember 9 - 23, 1953Link: Nebraska Tractor Test 505 file / Drawbar performance / Gear 3 used for power test. / Gear 1 used for pull test.
Max power 19.63 hp (14.6 kW)
Max pull 4,515 lbs (2048 kg)

References

Description The First Numbered Series of John Deere Tractors published in 2004, by Hain Publishing / Industrial Tractors and Equipment published in 1954, by John Deere / Tractors 1918-1976 published by John Deere* / *Publication contains known errors.

Variants

40 wheeled tractor