John Deere 4005 Specs ( 2008-2014 )

Compare Tractor

Overview

The John Deere 4005 is a compact utility tractor manufactured between 2008 and 2014 in Augusta, Georgia, powered by a 41.9 hp Yanmar 2.2L four-cylinder diesel engine. The tractor features a 9-speed partially synchronized collar shift transmission and was offered in both two-wheel and four-wheel drive configurations. It is equipped with a Category I rear hitch providing 2020 pounds of lift capacity and an open center hydraulic system with a total flow of 13 gpm.

Ideal Applications

Engine and PTO Performance: The 2.2L Yanmar diesel engine is rated at 41.9 gross horsepower at 2700 RPM and delivers a claimed 35 horsepower at the continuous 540 rear PTO.
Hydraulic and Hitch Capacity: The open center hydraulic system provides a total flow of 13 gpm, supporting a Category I rear hitch with a 2020-pound lift capacity at 24 inches.
Transmission and Mechanical Layout: The drivetrain consists of a 9-speed collar shift transmission with three ranges and synchronized shifting between forward speeds, complemented by power steering and wet disc brakes.

Production

Description Compact Utility tractor / Built in Augusta, Georgia, USA / Original price was $15,000 in 2009
Manufacturer John Deere

Engine

Engine type Yanmar 2.2L 4-cyl diesel
Air cleaner dry
Bore/Stroke 3.46x3.54 inches (88 x 90 mm)
Compression 19:1
Coolant capacity 6.1 qts (5.8 L)
Description Yanmar 4TNV88 / diesel / 4-cylinder / liquid-cooled
Displacement 133.6 ci (2.2 L)
Power 37.9 hp (28.3 kW)
Power (gross) 41.9 hp (31.2 kW)
Pre-heating air heater
Rated RPM 2700
Starter volts 12
Oil capacity 5.6 qts (5.3 L)
Engine (gross) 41.9 hp (31.2 kW)
PTO (claimed) 35 hp (26.1 kW)

Transmission

Description Three speeds, plus reverse on gear shift lever with A, B, and C ranges. Synchronized shifting between the forward speeds using the clutch. Tractor must be stopped, and clutch used, to shift to reverse or shift ranges.
Gears 9 forward and 3 reverse
Oil capacity 27.6 qts (26.1 L)
Transmission Collar Shift
Transmission type 9-speed partially synchronized
Type partially synchronized

Mechanical

Description Power steering / Wet disc brakes / ROPS. Canopy optional.
Drive type Two- or four-wheel drive

Capacity

Fuel 8.5 gal (32.2 L)
Hydraulic system 6.9 gal (26.1 L)

Hydraulics

Capacity 6.9 gal (26.1 L)
Pressure 2262 psi (156.0 bar)
Pump flow 8.5 gpm (32.2 lpm)
Steering flow 4.5 gpm (17.0 lpm)
Total flow 13 gpm (49.2 lpm)
Type open center
Valves 2

Hitch

Rear lift (at 24"/610mm) 2020 lbs (916 kg)
Rear Type I

PTO

Rear PTO continuous
Rear PTO Type 540

Electrical

Battery CCA 770
Battery volts 12
Charging amps 40
Charging system alternator
Ground negative

Dimensions & Tires

2WD Front tread 48.2 inches (122 cm)
2WD Rear tread 46.2 inches (117 cm)
4WD Front tread 54 inches (137 cm)
4WD Rear tread 46 inches (116 cm)
Height (hood) 51 inches (129 cm)
Height (ROPS) 85 inches (215 cm)
Length 124 inches (314 cm)
Wheelbase 69 inches (175 cm)
Front tire 6.5-16
Rear tire 14.9-24
Weight 2954 to 3175 pounds
Wheelbase 69 inches (175 cm)
Ag front 6.5-16 (2WD)
Ag rear 14.9-24

4005 Serial Numbers

2008 000100
2009 210001
Description FAQ: How to read a serial number table.
Location: Serial number plate on the rear of the John Deere 4005, below the PTO shaft.

John Deere 4005 Weight

2WD Shipping 2954 lbs (1339 kg)
4WD Shipping 3175 lbs (1440 kg)
Max capacity 5234 lbs (2374 kg)

John Deere 4005 attachments

Description front-end loader

References

Description 4000 Series Compact Utility Tractors published in 2009, by John Deere / 4000 Series Compact Utility Tractors published in 2011, by John Deere