John Deere 3720 Specs ( 2005-2013 )

Compare Tractor

Overview

The John Deere 3720 is a compact utility tractor manufactured between 2005 and 2013 in Augusta, Georgia, featuring a 44 hp Yanmar 1.5L turbocharged three-cylinder diesel engine. It is equipped with a Sauer-Danfoss eHydro three-range hydrostatic transmission and an open center hydraulic system providing a total flow of 13.9 gpm. The tractor is built with a 68-inch wheelbase and supports a variety of configurations including optional cab or foldable ROPS, with weights ranging from 2,900 to 3,570 pounds.

Ideal Applications

Engine Performance and Output: The liquid-cooled Yanmar 3TNV84HT engine utilizes direct injection and turbocharging to produce 44 hp and 101.1 lb-ft of torque at a rated speed of 2600 RPM.
Hydraulic and Hitch Specifications: The open center hydraulic system features a pump flow of 8.6 gpm and supports a Category I rear hitch with a rated lift capacity of 2,530 lbs at the ends.
Transmission and Mechanical Layout: The 3720 is configured with a four-wheel-drive system and an eHydro AutoHST hydrostatic transmission that provides infinite forward and reverse gears across three ranges.

Production

Description Compact Utility tractor / Built in Augusta, Georgia, USA
Manufacturer John Deere

Engine

Engine type Yanmar 1.5L 3-cyl diesel
Bore/Stroke 3.3x3.54 inches (84 x 90 mm)
Compression 18.5:1
Coolant capacity 5.6 qts (5.3 L)
Description Yanmar 3TNV84HT / turbocharged diesel / 3-cylinder / liquid-cooled
Displacement 91.5 ci (1.5 L)
Fuel system direct injection
Oil capacity 6 qts (5.7 L)
Power 44 hp (32.8 kW)
Rated RPM 2600
Starter volts 12
Torque 101.1 lb-ft (137.1 Nm)
Torque RPM 1560

Transmission

Description hydrostatic
Gears infinite forward and reverse (3-range) / infinite forward and reverse (3-range)
Transmission Sauer-Danfoss eHydro / eHydro AutoHST
Type hydrostatic / hydrostatic

Mechanical

Cab Two-post foldable ROPS. Cab optional.
Description Wet disc brakes
Drive type Four-wheel drive
Steering power

Capacity

Cab Fuel 11.8 gal (44.7 L)
Hydraulic system 6.8 gal (25.7 L)
ROPS Fuel 13.5 gal (51.1 L)

Hydraulics

Capacity 6.8 gal (25.7 L)
Pump flow 8.6 gpm (32.6 lpm)
Total flow 13.9 gpm (52.6 lpm)
Type open center
Valves 5

Hitch

Rear lift (at ends) 2,530 lbs (1147 kg)
Rear Type I

PTO

Mid PTO optional
Mid PTO Type 2100
Rear PTO independent
Rear PTO Type 540

Electrical

Battery CCA 500
Battery volts 12
Cab Charging amps 75
Ground negative
ROPS Charging amps 40

Dimensions & Tires

Cab Weight 3,570 lbs (1619 kg)
Clearance (rear axle) 12.2 inches (30 cm)
Height (hood) 57 inches (144 cm)
Height (ROPS) 93.3 inches (236 cm)
Length 120.2 inches (305 cm)
Rear tread 40.6/45.3/48.9/53.1/56.6 inches (103/115/124/134/143 cm)
ROPS Weight 2,900 lbs (1315 kg)
Wheelbase 68 inches (172 cm)
Width 52.4 inches*Minimum (133 cm)
Front tire 7-14
Rear tire 11.2-24
Weight 2900 to 3570 pounds
Wheelbase 68 inches (172 cm)
Ag front 7-14
Ag rear 11.2-24
Industrial front 25x8.5-14 / 27x8.5-15
Industrial rear 15-19.5 / 43x16-20
Lawn/turf front 27x8.5-15 / 25x10.5LL-15
Lawn/turf rear 41x14-20 / 41x18LL-16.1

3720 Serial Number Location

Description Serial number plate above front axle of the John Deere 3720 on right side of tractor.

3720 Serial Numbers

2005 170001
2006 280001
2007 380001
2008 480001
2009 522001
Description FAQ: How to read a serial number table.

John Deere 3720 attachments

Description 60" mid-mount mower deck / front-end loader / backhoe

References

Description Commercial & Consumer Equipment Purchasing Guide published in 2007, by John Deere / 3000 Series published in 2008, by John Deere / 3000 Series published in 2009, by John Deere / 3000 Twenty Series Compact Tractors published in 2005, by John Deere / 3000 Twenty Series Tractors Product Information Handbook published in 2004, by John Deere / TWENTY Series Tractors published in 2010, by John Deere

Speeds

Description With 11.2-24 rear tires. / With 11.2-24 rear tires.