John Deere 2130 Specs ( 1973-1977 )

Compare Tractor

Overview

The John Deere 2130 is a 4x2 2WD utility tractor manufactured in Mannheim, Germany, between 1973 and 1977. It is powered by a 3.9L four-cylinder liquid-cooled diesel engine rated at 73.8 net horsepower and 79.1 gross horsepower. The mechanical configuration includes a standard open operator station, hydraulic wet disc brakes, and an optional 16-speed two-speed power shift transmission.

Ideal Applications

Engine and Power Ratings: The 239 cubic inch diesel engine features direct injection and generates 181.4 lb-ft of torque at 1400 RPM with a rated engine speed of 2500 RPM.
Transmission and PTO Layout: The tractor is equipped with either an 8-forward/4-reverse or 16-forward/8-reverse Hi-Lo transmission and a transmission-based 540 RPM rear PTO.
Hitch and Hydraulic Capacity: The closed-center hydraulic system provides 6.6 gpm of pump flow at 2248 psi to support a Type II rear hitch with a 5560-lb lift capacity and lower-link draft sensing.

Production

Description Utility tractor / Built in Mannheim, Baden-Württemberg, Germany
Manufacturer John Deere

Engine

Engine type John Deere 3.9L 4-cyl diesel
Fuel tank 23.8 gal (90.1 L)
Air cleaner dry
Bore/Stroke 4.19x4.33 inches (106 x 110 mm)
Compression 16.8:1
Coolant capacity 12.1 qts (11.5 L)
Description John Deere / diesel / 4-cylinder / liquid-cooled
Displacement 239 ci (3.9 L)
Firing order 1-3-4-2
Fuel system direct injection
Idle RPM 650-2660
Operating RPM 1400-2500
Power (gross) 79.1 hp (59.0 kW)
Power (net) 73.8 hp (55.0 kW)
Rated RPM 2500
Starter electric
Starter volts 12
Torque 181.4 lb-ft (246.0 Nm)
Torque RPM 1400
Engine (gross) 79.1 hp (59.0 kW)
Engine (net) 73.8 hp (55.0 kW)
PTO (claimed) 60.4 hp (45.0 kW)

Transmission

Clutch dry disc
Gears 8 forward and 4 reverse / 16 forward and 8 reverse
Oil capacity 26.9 qts (service) (25.5 L) / 26.9 qts (service) (25.5 L)
Transmission Hi-Lo
Type two-speed power shift
Transmission type 8-speed / 16-speed two-speed power shift
Transmission type 8-speed / 16-speed two-speed power shift

Mechanical

Cab Open operator station. Cab optional.
Description Hydraulic wet disc brakes
Differential lock mechanical rear
Drive 4x2 2WD
Final drives planetary
Steering manual / power OptOptional

Hydraulics

Pressure 2248 psi (155.0 bar)
Pump flow 6.6 gpm (25.0 lpm)
Type closed center

Hitch

Control position control and lower-link draft sensing
Rear lift 5560 lbs (2522 kg)
Rear Type II

PTO

Engine RPM 540@2100
Rear PTO transmission
Rear PTO Type 540 (1.375)

Electrical

Batteries 2
Battery AH 55
Battery volts 12
Charging amps 28
Charging system alternator
Charging volts 14
Ground negative

Dimensions & Tires

Description Flange rear axle / Rack-and-pinion rear axle
Front tread 53.5 to 73.6 inches (135 to 186 cm)
Height 102.4 inches (260 cm)
Length 139.6 inches (354 cm)
Rear tread 61 to 76.8 inches (flange) (154 to 195 cm) / 61 to 96.1 inches (rack-and-pinion) (154 to 244 cm)
Weight 5980 lbs (2712 kg)
Wheelbase 85.8 inches (217 cm)
Width 80.3 inches*Minimum width. (203 cm)
Rear tire 15.5-38
Weight 5980 lbs (2712 kg)
Wheelbase 85.8 inches (217 cm)
Ag rear 15.5-38

2130 Serial Number Location

Description Right side of tractor frame, above front axle.

2130 Serial Numbers

1973 ------
1974 140000
1975 155483
1976 190675
1977 230487
1978 274909
1979 309934
Description FAQ: How to read a serial number table.

References

Description Operator's Manual 145 Loader (OMW21474) / Tractors 1130, 2030, 2130, 3130 published in 1976, by John Deere / Tractors 40 to 80 hp published in 1978, by John Deere / Product Information Manual published in 1975, by John Deere / Product Information Manual published in 1977, by John Deere

Speeds

Description With 16.9-34 rear tires.