John Deere 1630 Specs ( 1973-1979 )

Compare Tractor

Overview

The John Deere 1630 is a utility tractor produced between 1973 and 1979 at the Mannheim, Germany factory. It features a 2.9L 3-cylinder diesel engine rated at 59 gross horsepower and is available in both two-wheel and four-wheel drive configurations.

Ideal Applications

Transmission Configuration: Equipped with either an 8-speed partially synchronized transmission or a 16-speed two-speed power shift option, providing a range of 8 to 16 forward gears.
Hitch and Hydraulic Capacity: Features a closed center hydraulic system with a 2050 psi pressure rating and a Type II/I rear hitch with a 4100 lb lift capacity.
Engine and PTO Output: The 2.9L diesel engine delivers a net power of 56 hp and a claimed PTO output of 50 hp at a rated engine speed of 2100 RPM.

Production

Description Utility tractor
Factories Mannheim, Baden-Württemberg, Germany
Manufacturer John Deere

Engine

Engine type John Deere 2.9L 3-cyl diesel
Engine (gross) 59 hp (44.0 kW)
Engine (net) 56 hp (41.8 kW)
PTO (claimed) 50 hp (37.3 kW)

Transmission

Clutch dry disc
Description Four synchronized gear in two ranges, plus reverse range. Tractor must be stopped, and clutch used, to shift range. / Four gears (1-4) in two ranges (I/II) plus reverse (R) range. Left-hand power shift lever on dash.
Gears 8 forward and 4 reverse / 16 forward and 8 reverse
Type partially synchronized / two-speed power shift
Transmission type 8-speed partially synchronized / 16-speed two-speed power shift
Transmission type 8-speed partially synchronized / 16-speed two-speed power shift

Mechanical

Cab Open operator station. ROPS and cab available.
Description Hydraulic wet disc brakes
Differential lock mechanical rear
Drive type Two- or four-wheel drive
Final drives planetary
Steering manual / power OptOptional

Capacity

Fuel 16.5 gal (62.5 L)
Hydraulic system 9.5 gal (36.0 L)

Hydraulics

Capacity 9.5 gal (36.0 L)
Pressure 2050 psi (141.3 bar)
Type closed center

Hitch

Control position control and lower-link draft sensing
Rear lift 4100 lbs (1859 kg)
Rear Type II/I

PTO

Engine RPM 540@2100
Rear PTO live
Rear PTO Type 540 (1.375)

Electrical

Batteries 2
Battery volts 12
Charging amps 28
Charging system alternator
Charging volts 14
Ground negative

Dimensions & Tires

2WD Clearance (front axle) 20 inches (50 cm)
2WD Wheelbase 80.1 inches (203 cm)
Front tread 49.5 to 81 inches (125 to 205 cm)
Height (exhaust) 87.4 inches (221 cm)
Height (ROPS) 97 inches (246 cm)
Length 141.7 inches (359 cm)
Rear tread 57 to 77 inches (144 to 195 cm)
Shipping weight 4780 lbs (2168 kg)
Width 76.6 inches (194 cm)
2WD Rear tire 13.6-36
2WD Wheelbase 80.1 inches (203 cm)
Front tire 7.50-16
Weight 4780 lbs (2168 kg)
2WD Standard tires (ag) Front: 7.50-16. Rear: 13.6-36
4WD Standard tires (ag) Front: 9.50-24. Rear: 13.6-36
Ag front 6.50-16
Ag rear 16.9/14-28

1630 Serial Number Location

Description Serial number plate on the right side of the 1630 tractor frame, above the front axle.

References

Description Operator's Manual 145 Loader (OMW21474) / Operator's Manual 1020, 1120 and 1630 Tractors published by John Deere / 1630 Tractor published in 1977, by John Deere / Tractors 40 to 80 hp published in 1978, by John Deere / Product Information Manual published in 1975, by John Deere / Product Information Manual published in 1977, by John Deere