Home / J.I. Case / 4894

J.I. Case 4894 Specs ( 1983-1984 )

Compare Tractor

Overview

The J.I. Case 4894 is a 4WD farm tractor produced in Racine, Wisconsin, during 1983 and 1984 with a total production of 872 units. It is powered by a 300 hp Saab-Scania 11.0L 6-cylinder turbocharged diesel engine and features a 12-speed partial power shift transmission. Tested performance data from Nebraska Tractor Test 1330 indicates a maximum drawbar power of 218.68 hp and a maximum pull of 27,627 lbs.

Ideal Applications

Engine and PTO Performance: The liquid-cooled 11.0L Saab-Scania engine is rated at 2200 RPM and achieved a tested PTO power of 253.41 hp and a torque of 845 lb-ft at 1400 RPM.
Transmission and Steering Layout: The configuration includes a 12-speed partial power shift transmission with four ranges and a hydraulic steering system that supports front, rear, and four-wheel crab steering modes.
Physical Dimensions and Lift Capacity: This tractor has an operating weight of 25,750 lbs, a 110-inch wheelbase, and an optional Category III rear hitch with a lift capacity of 12,750 lbs at 24 inches.

Production

Description Built in Racine, Wisconsin, USA
Drive type Four-wheel Drive (4WD) tractor
Manufacturer J.I. Case
Original price $100,600 (1985)
Total built 872

Engine

Engine type Saab-Scania 11.0L 6-cyl diesel
Air cleaner dual paper elements
Bore/Stroke 5.00x5.71 inches (127 x 145 mm)
Compression 14.7:1
Coolant capacity 44 qts (41.6 L)
Description Saab-Scania / turbocharged diesel / 6-cylinder / liquid-cooled
Displacement 674 ci (11.0 L)
Oil capacity 48 qts (45.4 L)
Power 300 hp (223.7 kW)
Rated RPM 2200
Starter volts 12
Torque 845 lb-ft (1145.8 Nm)
Torque RPM 1400
Drawbar (tested) 218.68 hp (163.1 kW)
PTO (claimed) 253 hp (188.7 kW)
PTO (tested) 253.41 hp (189.0 kW)

Transmission

Clutch hydraulic wet disc
Description Four ranges (1-4) with three power shift gears (1-3) plus reverse in each range. Both shift levers mounted on the dashboard. Range shift lever is to the left in a H-pattern. Gear shift is an inline pattern on the right.
Gears 12 forward and 4 reverse
Transmission partial power shift
Transmission type 12-speed

Mechanical

Description Hydraulic dry disc brakes / Silent Guardian cab standard
Drive 4x4 4WD
Steering hydraulic, front, rear or four-wheel crab steering

Capacity

Fuel 150 gal (567.8 L)
Hydraulic system 18 gal (68.1 L)

Hydraulics

Capacity 18 gal (68.1 L)
Pressure 2350 psi (162.0 bar)
Total flow 27 gpm (102.2 lpm)
Type closed center
Valves 4

Hitch

Rear lift (at 24"/610mm) 12,750 lbs (5783 kg)
Rear Type III (optional)

PTO

Engine RPM 1000@2200
Rear PTO independent (optional)
Rear PTO Type 1000

Electrical

Battery volts 12
Ground negative

Dimensions & Tires

Ballasted weight 28,460 lbs (12909 kg)
Ground clearance 18 inches (frame) (45 cm)
Height (exhaust) 125 inches (317 cm)
Length 237 inches (601 cm)
Operating weight 25,750 lbs (11680 kg)
Wheelbase 110 inches (279 cm)
Width 99 inches (minimum) (251 cm)
Front tire 18.4-34
Rear tire 18.4-34
Weight 25,750 lbs (11680 kg)
Wheelbase 110 inches (279 cm)
Ag front 18.4-34
Ag rear 18.4-34

4894 Serial Numbers

1984 8865000
Description FAQ: How to read a serial number table.
Location: Data plates located at forward-right corner in top of the tractor cab.

Nebraska Tractor Test 1330

Description Diesel 12-speed 4WDOctober 22 - 29, 1979Link: Nebraska Tractor Test 1330 file / PTO performance / Drawbar performance / Gear 3-2 used for power test. / Gear 1-2 used for pull test.
Fuel use 15.5 gal/hour (58.7 l/hour) / 15.4 gal/hour (58.3 l/hour)
Max power 218.68 hp (163.1 kW)
Max pull 27,627 lbs (12531 kg)
Power at rated engine speed 253.41 hp (189.0 kW)

References

Description 4694 - 4894 published in 1983, by J.I. Case / 94 Series published in 1983, by J.I. Case / Tractor & Loaders Buyers Guide published in 1985, by J.I. Case

Speeds

Description With 23.1x30 tires.