Home / J.I. Case / 2094

J.I. Case 2094 Specs

Compare Tractor

Production

Description Row-Crop tractor / Built in Racine, Wisconsin, USA / Original price was $43,400 in 1984
Manufacturer J.I. Case

Engine

Engine type Case 8.3L 6-cyl diesel
Bore/Stroke 4.625x5.00 inches (117 x 127 mm)
Compression 16:1
Coolant capacity 38 qts (36.0 L)
Description Case / diesel / 6-cylinder / liquid-cooled
Displacement 504 ci (8.3 L)
Oil capacity 19 qts (18.0 L)
Power 127 hp (94.7 kW)
Rated RPM 2100
Starter volts 12
Torque 366.6 lb-ft (497.1 Nm)
Torque RPM 1575
Drawbar (claimed) 100 hp (74.6 kW)
Drawbar (tested) 98.66 hp (73.6 kW)
PTO (claimed) 110 hp (82.0 kW)
PTO (tested) 111.50 hp (83.1 kW)

Transmission

Description Three power-shift gears (1-3), plus reverse, in four ranges (1-4). Reverse does not function in fourth range.
Gears 12 forward and 3 reverse
Oil capacity 100 qts (94.6 L)
Transmission type 12-speed three-speed power shift
Type three-speed power shift

Mechanical

Description Power steering / Wet disc brakes / Four-post ROPS. Silent Guardian cab optional with air-conditioning.
Drive type Two- or four-wheel drive

Capacity

Fuel 65 gal (246.0 L)
Hydraulic system 25 gal (94.6 L)

Hydraulics

Capacity 25 gal (94.6 L)
Pressure 2250 psi (155.1 bar)
Pump flow 23 gpm (87.1 lpm)
Steering flow 8 gpm (30.3 lpm)
Steering press. 2000 psi (137.9 bar)
Type closed center
Valves 2 to 4 *3 only with 4WD

Hitch

Rear lift (at 24"/610mm) 6,600 lbs (2993 kg)
Rear Type II

PTO

Clutch hydraulic
Rear PTO independent
Rear PTO Type 540/1000

Electrical

Battery volts 12
Charging amps 72
Charging system alternator
Ground negative

Dimensions & Tires

Bar rear axle 3.5 by 96 inches (88 by 2438 mm) / 3.5 by 120 inches (88 by 3048 mm)
Rear tread 60 to 88 inches (152 to 223 cm) / 60 to 112 inches (152 to 284 cm)
Wheelbase 104 inches (264 cm)
Width 96 inches (243 cm)
Front tire 11.00x16
Rear tire 18.4x38
Weight 10950 to 14190 pounds
Wheelbase 104 inches (264 cm)
Ag front 11.00x16 / 14Lx16
Ag rear 18.4x38 / 23.1x34

2094 Serial Numbers

1984 9931800
Description FAQ: How to read a serial number table.
Location: Inside cab or on right-front frame

J.I. Case 2094 Weight

Max capacity 15,600 lbs (2WD) (7076 kg)
Max front axle 12,125 lbs (5499 kg)
Max rear axle 13,000 lbs (5896 kg)
Operating 14,190 lbs (6436 kg)
Shipping 10,950 lbs (4966 kg)

Nebraska Tractor Test 1525

Description Diesel 12-speed 2WDMay 30 - June 16, 1984Link: Nebraska Tractor Test 1525 file / PTO performance / Drawbar performance / Gear 3-2 used for power test. / Gear 2-1 used for pull test.
Fuel use 7.2 gal/hour (27.3 l/hour) / 7.1 gal/hour (26.9 l/hour)
Max power 98.66 hp (73.6 kW)
Max pull 11,910 lbs (5402 kg)
Power at rated engine speed 111.50 hp (83.1 kW)

References

Description 2094 - 2294 published in 1983, by J.I. Case / 94 Series published in 1983, by J.I. Case / 2094/2294/2394/2594 Tractors published in 1983, by J.I. Case / Product Information - Case 94 Series Tractors published in 1983, by J.I. Case / The Tractor Specialist Buyers Guide published in 1984, by J.I. Case / Tractor & Loaders Buyers Guide published in 1985, by J.I. Case

Speeds

Description With 18.4x38 rear tires.