International Harvester 806 Specs ( 1963-1967 )

Compare Tractor

Overview

The International Harvester 806 is a standard-tread farm tractor produced between 1963 and 1967, with a total production of 8,052 units. It features multiple engine options including diesel, gasoline, and LP gas variants, and is equipped with either an 8-speed unsynchronized or a 16-speed partial power shift Torque Amplifier transmission.

Ideal Applications

Engine Performance and Output: The diesel variant utilizes an International Harvester D-361 5.9L 6-cylinder engine with a claimed PTO output of 94.93 hp and a claimed drawbar rating of 86.6 hp.
Transmission and Drive Configuration: Available in a 4x2 2WD configuration, the tractor offers a Torque Amplifier system providing a clutchless shift to lower speeds, resulting in 16 forward and 8 reverse gears.
Physical Dimensions and Capacity: The unit features a 91-inch wheelbase, shipping weights starting at 8,460 lbs, and a hydraulic system capacity of 17 gallons with a total flow of 24 gpm.

Production

Description Standard-tread tractor
Manufacturer International Harvester
Original price $6,800 (1967)
Total built 8,052

Engine

Air cleaner dual dry
Bore/Stroke 4.125x4.50 inches (105 x 114 mm) / 3.8125x4.39 inches (97 x 112 mm) / 3.8125x4.39 inches (97 x 112 mm)
Compression 7.7:1 / 8.71:1
Coolant capacity 24 qts (22.7 L)
Description International Harvester D-361 / diesel / 6-cylinder / liquid-cooled / Interntional Harvester C301 / gasoline / 6-cylinder / liquid-cooled / International Harvester / LP gas / 6-cylinder / liquid-cooled
Displacement 361 ci (5.9 L) / 301 ci (4.9 L) / 301 ci (4.9 L)
Idle RPM 900-2400
Rated RPM 2400 / 2400 / 2400
Starter volts 12 / 12 / 12
Engine type International Harvester 5.9L 6-cyl diesel / Interntional Harvester 4.9L 6-cyl gasoline / International Harvester 4.9L 6-cyl LP gas
Engine type International Harvester 5.9L 6-cyl diesel / Interntional Harvester 4.9L 6-cyl gasoline / International Harvester 4.9L 6-cyl LP gas
Drawbar (claimed) 86.6 hp (64.6 kW)
PTO (claimed) 94.93 hp (70.8 kW)

Transmission

Description Four gears (1-4) in low, high, and reverse ranges. / As two-range Torque Amplifer (TA) to the basic transmission. Pulling back on the left-hand TA lever provides a clutchless shift to a lower speed for each gear. Pushing the lever forward return to direct-drive mode.
Gears 8 forward and 4 reverse / 16 forward and 8 reverse
Transmission Torque Amplifier
Type unsynchronized / partial power shift
Transmission type 8-speed unsynchronized / 16-speed partial power shift
Transmission type 8-speed unsynchronized / 16-speed partial power shift

Mechanical

Cab Open operator station
Description Hydraulic dry disc brakes
Drive 4x2 2WD
Steering hydrostatic power

Capacity

Fuel 42 gal (159.0 L)
Hydraulic system 17 gal (64.3 L)

Hydraulics

Capacity 17 gal (64.3 L)
Pump flow 12 gpm (45.4 lpm)
Steering flow 9 gpm (34.1 lpm)
Total flow 24 gpm (90.8 lpm)
Type open center

Hitch

Rear Type II
Type IH Fast Hitch

PTO

Rear PTO independent
Rear PTO Type 1000

Electrical

Batteries 2 (diesel)
Battery AH 170 (diesel)
Battery volts 6 (diesel)
Charging amps 25
Charging system generator
Ground negative

Dimensions & Tires

Front tread 53 inches (fixed) (134 cm) / 56/69/80 inches (adjustable) (142/175/203 cm)
Height (steering wheel) 82 inches (208 cm)
Length 153 inches (388 cm)
Rear tread 60 to 84 inches (152 to 213 cm)
Shipping weight 8,460 lbs (gas) (3837 kg)
Wheelbase 91 inches (231 cm)
Width 106 inches (269 cm)
Front tire 7.50-20
Rear tire 18.4-34
Weight 8460 to 9220 pounds
Wheelbase 91 inches (231 cm)
Ag front 7.50-20
Ag rear 18.4-34 / 23.1-34

806 Serial Numbers

1963 501
1964 1403
1965 3758
1966 5917
1967 7409
Description FAQ: How to read a serial number table.

References

Description 706-806 Tractors published by International Harvester

Speeds

Description With 16.9-38 rear tires. / With 16.9-38 rear tires.

Variants

Farmall 806 row-crop
IH 806 standard-tread