International Harvester 4366 Specs ( 1973-1976 )
Overview
The International Harvester 4366 is a four-wheel drive farm tractor manufactured by Steiger between 1973 and 1976. It is powered by a 7.6L 6-cylinder turbocharged diesel engine rated at 225 hp and features a 10-speed Fuller syncromesh transmission. This model has an operating weight of 21,690 lbs and was originally listed with a 1976 price of $37,360.
Ideal Applications
Nebraska Test Performance:
According to Nebraska Tractor Test 1153, the unit recorded a maximum drawbar pull of 23,138 lbs and a tested drawbar power of 163.17 hp while consuming 13.0 gallons of fuel per hour.
Mechanical and Drive Configuration:
The tractor is equipped with a four-wheel drive system, hydrostatic power steering, and integral hydraulic caliper disc brakes as standard mechanical features.
Hydraulic System Capacity:
The open center hydraulic system provides a pump flow of 22 gpm and a steering flow of 17 gpm, supported by a 31-gallon reservoir and two rear valves.
Production
| Description | Built in Fargo, North Dakota, USA / Original price was $37,360 in 1976 |
|---|---|
| Distributor | International Harvester |
| Drive type | Four-wheel Drive (4WD) tractor |
| Manufacturer | Steiger |
Engine
| Engine type | International Harvester 7.6L 6-cyl diesel |
|---|---|
| Bore/Stroke | 4.30x5.35 inches (109 x 136 mm) |
| Compression | 15.1:1 |
| Coolant capacity | 36 qts (34.1 L) |
| Description | International Harvester DT-466 / turbocharged diesel / 6-cylinder / liquid-cooled |
| Displacement | 466 ci (7.6 L) |
| Idle RPM | 850-2600 |
| Oil capacity | 18 qts (17.0 L) |
| Power | 225 hp (167.8 kW) |
| Rated RPM | 2600 |
| Starter volts | 12 |
| Drawbar (claimed) | 165 hp (123.0 kW) |
| Drawbar (tested) | 163.17 hp (121.7 kW) |
Transmission
| Description | Five forward speeds, plus one reverse, with high and low ranges. |
|---|---|
| Gears | 10 forward and 2 reverse |
| Transmission | Fuller syncromesh |
| Transmission type | 10-speed |
Mechanical
| Cab | Cab standard with heater. |
|---|---|
| Description | Integral hydraulic caliper disc brakes |
| Drive type | Four-wheel drive |
| Steering | hydrostatic power |
Capacity
| Fuel | 141 gal (533.7 L) |
|---|---|
| Hydraulic system | 31 gal (117.3 L) |
Hydraulics
| Capacity | 31 gal (117.3 L) |
|---|---|
| Pump flow | 22 gpm (83.3 lpm) |
| Rear valves | 2 |
| Steering flow | 17 gpm (64.3 lpm) |
| Type | open center |
Dimensions & Tires
| Ballasted weight | 23,000 lbs (10432 kg) |
|---|---|
| Clearance (drawbar) | 16.5 inches (41 cm) |
| Height (cab) | 128 inches (325 cm) |
| Length | 241 inches (612 cm) |
| Operating weight | 21,690 lbs (9838 kg) |
| Wheelbase | 118 inches (299 cm) |
| Width | 116 inches*Minimum width. (294 cm) |
| Front tire | 28.1-26 |
| Rear tire | 28.1-26 |
| Weight | 21,690 lbs (9838 kg) |
| Wheelbase | 118 inches (299 cm) |
| Ag front | 28.1-26 / 18.4-38 |
| Ag rear | 28.1-26 / 18.4-38 |
Nebraska Tractor Test 1153
| Description | Diesel 10-speed 4WDNovember 8 - 29, 1973Link: Nebraska Tractor Test 1153 file / Drawbar performance / Gear 4L used for power test. / Gear 1L used for pull test. |
|---|---|
| Fuel use | 13.0 gal/hour (49.2 l/hour) |
| Max power | 163.17 hp (121.7 kW) |
| Max pull | 23,138 lbs (10495 kg) |
References
| Description | Farm Equipment Reference Catalog published in 1973, by International Harvester |
|---|