Overview
The Ferguson Pony is a utility farm tractor produced from 1952 to 1954 in Woodstock, Ontario, featuring a 1.0L Continental four-cylinder gasoline engine. The configuration includes a three-speed unsynchronized gear transmission, manual steering, and an open operator station. Nebraska Tractor Test 401 recorded its maximum belt power at 11.62 hp and maximum drawbar pull at 1432 lbs.
Ideal Applications
Belt Pulley Specifications:
The tractor is equipped with a 6-inch diameter belt pulley operating at 1990 RPM with a belt speed of 3300 feet per minute, yielding a tested 11.62 hp.
Tested Drawbar Performance:
Nebraska Tractor Test 401 established a maximum drawbar pull of 1432 lbs and 10.43 hp, with the unit rated for the operation of a single plow.
Chassis and Tread Adjustability:
Built on a 66-inch wheelbase, the tractor features adjustable front tread widths from 45 to 75.5 inches and adjustable rear tread widths from 41 to 72 inches.
Production
| Description | Utility tractor / Built in Woodstock, Ontario, Canada / After Massey-Harris and Ferguson merged, several models were sold under the brand of the other manufacturer. |
|---|---|
| Manufacturer | Ferguson |
Engine
| Engine type | Continental 1.0L 4-cyl gasoline |
|---|---|
| Air cleaner | oil bath |
| Bore/Stroke | 2.375x3.50 inches (60 x 89 mm) |
| Compression | 6.5:1 |
| Coolant capacity | 7 qts (6.6 L) |
| Description | Continental N62 / gasoline / 4-cylinder / liquid-cooled |
| Displacement | 62 ci (1.0 L) |
| Oil capacity | 4 qts (3.8 L) |
| Rated RPM | 1800 |
| Sparkplug | Champion 18625A |
| Belt (tested) | 11.62 hp (8.7 kW) |
| Drawbar (tested) | 10.43 hp (7.8 kW) |
| Plows | 1 |
Transmission
| Clutch | mechanical dry disc |
|---|---|
| Gears | 3 forward and 1 reverse |
| Oil capacity | 3.6 qts (3.4 L) |
| Transmission type | 3-speed unsynchronized gear |
| Type | unsynchronized gear |
Mechanical
| Cab | Open operator station. |
|---|---|
| Description | Manual steering / Differential mechanical contracting band brakes |
| Drive type | Two-wheel drive |
| Final drives | bull gear |
Capacity
| Fuel | 7 gal (26.5 L) |
|---|---|
| Hydraulic system | 0.4 gal (1.5 L) |
Hydraulics
| Capacity | 0.4 gal (1.5 L) |
|---|---|
| Pump flow | 2.5 gpm (9.5 lpm) |
| Type | optional |
PTO
| Rear PTO | optional |
|---|---|
| Rear PTO Type | 540 |
Electrical
| Charging system | generator |
|---|
Dimensions & Tires
| Front tread | 45 to 75.5 inches (114 to 191 cm) |
|---|---|
| Height | 60 inches (152 cm) |
| Rear tread | 41 to 72 inches (104 to 182 cm) |
| Wheelbase | 66 inches (167 cm) |
| Front tire | 4.00x-15 |
| Rear tire | 8-24 |
| Weight | 1450 to 1890 pounds |
| Wheelbase | 66 inches (167 cm) |
| Ag front | 4.00x-15 |
| Ag rear | 8-24 / 9-24 |
Belt Pulley
| Diameter | 6 inches (15 cm) |
|---|---|
| RPM | 1990 |
| Speed | 3300 ft/min (1005.84 meters/min) |
| Width | 5.5 inches (13 cm) |
Ferguson Pony Weight
| Ballasted | 2547 lbs (1155 kg) |
|---|---|
| Operating | 1890 lbs (857 kg) |
| Shipping | 1450 lbs (657 kg) |
Ferguson Pony attachments
| Description | blade |
|---|
Nebraska Tractor Test 401
| Belt fuel use (max) | 1.2 gal/hour (4.5 l/hour) |
|---|---|
| Belt power (max) | 11.62 hp (8.7 kW) |
| Description | Gasoline 3-speed 2WDSeptember 14 - 22, 1948Link: Nebraska Tractor Test 401 file / Drawbar performance / Gear 2 used for power test. / Gear 1 used for pull test. |
| Max power | 10.43 hp (7.8 kW) |
| Max pull | 1432 lbs (649 kg) |
Pony Serial Number Location
| Description | Serial number on the right-front side of the tractor frame. |
|---|
Pony Serial Numbers
| 1947 | PGS1001 / PGA1001 |
|---|---|
| 1948 | PGS1321 / PGA1001A |
| 1949 | PGS1571 / PGA1571A |
| 1950 | PGA10817A |
| 1951 | PGA13726 |
| 1952 | PGA18225 |
| 1953 | PGA22007 |
| 1954 | PGA22669 |
| Description | FAQ: How to read a serial number table. |
Speeds
| Description | With 8-24 rear tires. |
|---|