Overview
The Fendt 938 Vario MT is an agricultural crawler tractor produced in Jackson, Minnesota since 2020. This model is equipped with a 9.8L 7-cylinder AGCO Power engine rated at 374 gross horsepower and features the Vario ML400T continuously variable transmission.
Ideal Applications
Powertrain and Traction Configuration:
This crawler drive tractor utilizes 14-inch to 34-inch track widths and a Vario ML400T transmission with infinite forward and reverse gears to manage 1252 lb-ft of torque at 1450 RPM.
Hydraulic and Hitch Capacity:
The unit features a closed-center hydraulic system with a 58 gpm pump flow and a Category IVN/III rear hitch capable of lifting up to 19,000 lbs at the ends.
Electrical and Charging Specifications:
The 12V electrical system is configured with two 185 AH batteries and dual 150A alternators providing a total charging capacity of 300 amps.
Production
| Description | Agricultural Crawler tractor / Built in Jackson, Minnesota, USA |
|---|---|
| Manufacturer | Fendt (a part of AGCO) |
Engine
| Engine type | AGCO Power 9.8L 7-cyl diesel |
|---|---|
| Bore/Stroke | 4.37x5.71 inches (111 x 145 mm) |
| Description | AGCO Power / turbocharged diesel / 7-cylinder / liquid-cooled |
| Displacement | 598 ci (9.8 L) |
| Emissions | Tier IV |
| Rated Power (gross) | 374 hp (278.9 kW) |
| Rated RPM | 1450 |
| Starter | electric |
| Starter volts | 12 |
| Torque | 1252 lb-ft (1697.7 Nm) |
| Torque RPM | 1450 |
| Engine (gross) | 374 hp (278.9 kW) |
Transmission
| Description | continuously-variable transmission |
|---|---|
| Gears | infinite forward and reverse |
| Transmission | Vario ML400T |
| Type | continuously-variable transmission |
Mechanical
| Cab | Cab standard with air-conditioning. |
|---|---|
| Drive | crawler |
Capacity
| Exhaust fluid (DEF) | 18.8 gal (71.2 L) |
|---|---|
| Fuel | 180 gal (681.3 L) |
| Hydraulic system | 33 gal (124.9 L) |
Hydraulics
| Capacity | 33 gal (124.9 L) |
|---|---|
| Pressure | 2900 psi (200.0 bar) |
| Pump flow | 58 gpm (219.5 lpm) |
| SCV flow | 37 gpm (140.0 lpm) |
| Type | closed center |
| Valves | 4 to 6 |
Hitch
| Control | position and draft control |
|---|---|
| Drawbar | Cat. 4 |
| Rear lift (at 24"/610mm) | 16500 lbs (7484 kg) |
| Rear lift (at ends) | 19000 lbs (8618 kg) |
| Rear Type | IVN/III |
PTO
| Engine RPM | 1000@1650 |
|---|---|
| Rear PTO | independent |
| Rear PTO Type | 1000/1000E (1.75) |
Electrical
| Batteries | 2 |
|---|---|
| Battery AH | 185 |
| Battery volts | 12 |
| Charging amps | 300 *Dual 150A alternators. |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Clearance (drawbar) | 19.7 inches (50 cm) |
|---|---|
| Front axle | 8 by 100.9 inches (203 by 2562 mm) / 8 by 132.9 inches (203 by 3375 mm) |
| Gauge | 72 to 88 inches (182 to 223 cm) / 72 to 120 inches (182 to 304 cm) |
| Height (cab) | 137.6 inches (349 cm) |
| Height (exhaust) | 133.9 inches (340 cm) |
| Length | 241.1 inches (612 cm) |
| Wheelbase | 101 inches (256 cm) |
| Width | 98.5 inches (standard) (250 cm) |
Dimensions & Tracks
| Description | 14-inch tracks |
|---|---|
| Weight | 33443 to 33667 pounds |
| Wheelbase | 101 inches (256 cm) |
Fendt 938 Vario MT Tracks
| Width | 14 inches (35 cm) / 16 inches (40 cm) / 18 inches (45 cm) / 20 inches (50 cm) / 25 inches (63 cm) / 30 inches (76 cm) / 34 inches (86 cm) |
|---|
Fendt 938 Vario MT Weight
| Max capacity | 41000 lbs (18597 kg) |
|---|---|
| Max Drawbar | 8000 lbs (extended) (3628 kg) |
References
| Description | 900 Vario MT Series published in 2020, by Fendt* / 900 Vario MT Series published in 2020, by Fendt* / *Publication contains known errors. |
|---|