Deutz-Fahr 4060E Keyline Specs ( 2018-Present )
Overview
The Deutz-Fahr 4060E Keyline is a utility farm tractor produced from 2018 to the present, featuring an SDF 3.0L 3-cylinder turbocharged diesel engine rated at 59.1 hp. It is available in both 2WD and 4WD configurations with a 3527 lb rear lift capacity and an open operator station with a two-post ROPS.
Ideal Applications
Powertrain and Engine Performance:
The liquid-cooled SDF 1000.3 engine delivers 163 lb-ft of torque at a rated 2200 RPM, utilizing a 14.5-gallon fuel tank and a 12-volt negative ground electrical system.
Chassis and Dimensional Specifications:
Operating weights range from 4630 lbs for 2WD models to 5512 lbs for 4WD variants, with wheelbases measuring between 75.6 and 76.8 inches depending on the drive type.
Transmission and Hydraulic Configuration:
The mechanical dry disc clutch system supports three transmission types including an 8-speed gear, 12-speed creeper, or 8-speed partially synchronized setup paired with an 8.2 gpm open center hydraulic pump.
Production
| Description | Utility tractor |
|---|---|
| Manufacturer | Deutz-Fahr |
Engine
| Engine type | SDF 3.0L 3-cyl diesel |
|---|---|
| Fuel tank | 14.5 gal (54.9 L) |
| Bore/Stroke | 4.13x4.56 inches (105 x 116 mm) |
| Description | SDF 1000.3 / turbocharged intercooled diesel / 3-cylinder / liquid-cooled |
| Displacement | 183.1 ci (3.0 L) |
| Emissions | Stage IIIA |
| Power | 59.1 hp (44.1 kW) |
| Rated RPM | 2200 |
| Starter | electric |
| Starter volts | 12 |
| Torque | 163 lb-ft (221.0 Nm) |
Transmission
| Clutch | mechanical dry disc / mechanical dry disc / mechanical dry disc |
|---|---|
| Gears | 8 forward and 2 reverse / 12 forward and 3 reverse / 8 forward and reverse |
| Type | gear / creeper / partially synchronized |
| Transmission type | 8-speed gear / 12-speed creeper / 8-speed partially synchronized |
| Transmission type | 8-speed gear / 12-speed creeper / 8-speed partially synchronized |
Mechanical
| Cab | Open operator station. Two-post ROPS available. |
|---|---|
| Description | Power steering |
| Differential lock | mechanical |
| Drive type | Two- or four-wheel drive |
Hydraulics
| Pump flow | 8.2 gpm (31.0 lpm) |
|---|---|
| Type | open center |
| Valves | 2 to 4 |
Hitch
| Rear lift | 3527 lbs (1599 kg) |
|---|---|
| Rear Type | II |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 540 |
Electrical
| Battery volts | 12 |
|---|---|
| Ground | negative |
Dimensions & Tires
| 2WD Front tread | 57.6 inches (146 cm) |
|---|---|
| 2WD ROPS Weight | 4630 lbs (2100 kg) |
| 2WD Wheelbase | 75.6 inches (192 cm) |
| 4WD Front tread | 58.6 inches (148 cm) |
| 4WD ROPS Weight | 5512 lbs (2500 kg) |
| 4WD Wheelbase | 76.8 inches (195 cm) |
| Height (steering wheel) | 64.3 inches (163 cm) |
| Length | 139.8 inches (355 cm) |
| Rear tread | 56.7 inches (144 cm) |
| Width | 70.9 inches (180 cm) |
| 2WD Wheelbase | 75.6 inches (192 cm) |
| 4WD Wheelbase | 76.8 inches (195 cm) |
| Weight | 4630 to 5512 pounds |
References
| Description | 4E Keyline Series published in 2019, by Deutz-Fahr |
|---|