Home / Challenger / MT685C

Challenger MT685C Specs ( 2009-2010 )

Compare Tractor

Overview

The Challenger MT685C is a row-crop farm tractor manufactured in Beauvais, France, during the 2009-2010 production years. This 4WD model is equipped with an 8.4L 6-cylinder AGCO SISU POWER engine and a Dyna-VT continuously-variable transmission providing infinite gear options.

Ideal Applications

Engine Output and Emissions Control: The 8.4L turbocharged intercooled diesel engine is rated at 340 hp with 1136 lb-ft of torque at 1500 RPM and utilizes selective catalytic reduction to meet Interim Tier 4 emission standards.
Hydraulic System and Hitch Capacity: This tractor features a closed center load sensing hydraulic system with a 46.2 gpm total flow and a rear lift capacity of 21,336 lbs at 24 inches from the hitch.
Chassis and Electrical Specifications: The machine is built on a 122.2-inch wheelbase and operates on a 12-volt electrical system featuring dual batteries and two 120A alternators providing a total charging capacity of 240 amps.

Production

Description Row-Crop tractor / Built in Beauvais, France
Manufacturer Challenger (a part of AGCO)

Engine

Engine type AGCO SISU POWER 8.4L 6-cyl diesel
Exhaust fluid (DEF) 7.9 gal (29.9 L)
Fuel tank 155.9 gal (590.1 L)
Bore/Stroke 4.37x5.71 inches (111 x 145 mm)
Compression 16.7:1
Description AGCO SISU POWER 84CTA / turbocharged intercooled diesel / 6-cylinder / liquid-cooled / The engine uses AGCO's e3 selective catalytic reduction (SCR) system to reduce nitrogen oxides (NOx). The system uses a diesel exhaust fluid that is injected into the exhaust gas.
Displacement 512.6 ci (8.4 L)
Emission control selective catalytic reduction (SCR)
Emissions Interim Tier 4
Maximum Power 370 hp (275.9 kW)
Power 340 hp (253.5 kW)
Rated RPM 2200
Starter type electric
Torque 1136 lb-ft (1540.4 Nm)
Torque RPM 1500
PTO (claimed) 320 hp (238.6 kW)

Transmission

Description continuously-variable transmission
Gears infinite forward and reverse
Transmission Dyna-VT
Type continuously-variable transmission

Mechanical

Cab Cab standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control.
Description Power steering / Hydraulic wet disc brakes
Drive type Four-wheel drive

Hydraulics

Pressure 2,901 psi (200.0 bar)
Pump flow 26.4 gpm (99.9 lpm)
Total flow 46.2 gpm (174.9 lpm)
Type closed center load sensing
Valves 4 to 6

Hitch

Front Hitch III
Front lift (at ends) 11,020 lbs (4998 kg)
Rear lift (at 24"/610mm) 21,336 lbs (9678 kg)
Rear lift (at ends) 26,460 lbs (12002 kg)
Rear Type III, IV

PTO

Clutch electro-hydraulic
Front PTO independent OptOptional
Front PTO Type 1000 (1.375)
Rear PTO independent
Rear PTO Type 1000E/1000 (1.75)

Electrical

Batteries 2
Battery CCA 775
Battery volts 12
Charging amps 240 *Two 120A alternators.
Charging system alternator
Ground negative

Dimensions & Tires

Ag front 480/70R34
Ag rear 520/85R46
Height (cab) 133.1 inches (338 cm)
Length 223.2 inches (566 cm)
Max weight 38,890 lbs (17640 kg)
Shipping weight 24,250 lbs (10999 kg)
Wheelbase 122.2 inches (310 cm)
Front tire 480/70R34
Rear tire 520/85R46
Weight 24,250 lbs (10999 kg)
Wheelbase 122.2 inches (310 cm)

Challenger MT685C attachments

Description front-end loader

MT685C Serial Number Location

Description Serial number plate below the tractor cab door on the right side.