Challenger MT655D Specs ( 2011-2013 )
Overview
The Challenger MT655D is a 4WD row-crop tractor produced in Jackson, Minnesota, between 2011 and 2013. It is powered by an 8.4L AGCO Power 6-cylinder diesel engine and equipped with a Techstar continuously variable transmission. Notable specifications include a shipping weight of 24,250 lbs and a closed center load sensing hydraulic system providing a total flow of 46 gpm.
Ideal Applications
Production
| Description | Row-Crop tractor / Built in Jackson, Minnesota, USA / Original price was $279,539 in 2013 |
|---|---|
| Manufacturer | Challenger (a part of AGCO) |
Engine
| Engine type | AGCO Power 8.4L 6-cyl diesel |
|---|---|
| Bore/Stroke | 4.370x5.709 inches (111 x 145 mm) |
| Compression | 16.7:1 |
| Description | AGCO Power / turbocharged air-to-air intercooled diesel / 6-cylinder / liquid-cooled |
| Displacement | 513.8 ci (8.4 L) |
| Emission control | selective catalytic reduction (SCR) |
| Emissions | Interim Tier IV |
| Fuel system | electronic high-pressure common rail |
| Maximum Power | 295 hp (220.0 kW) |
| Power (gross) | 265 hp (197.6 kW) |
| Pre-heating | thermostart |
| Rated RPM | 2100 |
| Starter | electric |
| Starter volts | 12 |
| Drawbar (tested) | 192.2 hp (143.3 kW) |
| Engine (gross) | 265 hp (197.6 kW) |
| PTO (claimed) | 225 hp (167.8 kW) |
| PTO (tested) | 276.7 hp (206.3 kW) |
Transmission
| Description | continuously variable transmission |
|---|---|
| Gears | infinite forward and reverse |
| Transmission | Techstar CVT |
| Type | continuously variable transmission |
Mechanical
| Cab | Cab standard with air-conditioning and OptiRide Plus hydraulic suspension AGCO System 150 (optional); AGCOMMAND (optional) |
|---|---|
| Description | Hydraulic wet disc brakes |
| Differential lock | electro-hydraulic |
| Drive type | Four-wheel drive |
| Final drives | inboard planetary |
| Steering | hydrostatic power |
| Trailer brakes | pneumatic (optional) |
Capacity
| Exhaust fluid (DEF) | 16 gal (60.6 L) |
|---|---|
| Fuel | 167 gal (632.1 L) |
| Hydraulic system | 29.1 gal (110.1 L) |
Hydraulics
| Capacity | 29.1 gal (110.1 L) |
|---|---|
| Pressure | 2900 psi (200.0 bar) |
| SCV flow | 26.4 gpm (99.9 lpm) |
| Total flow | 46 gpm (174.1 lpm) |
| Type | closed center load sensing (CCLS) |
| Valves | 4 to 6 |
Hitch
| Drawbar | Cat. 3 |
|---|---|
| Front Hitch | III (optional) |
| Front lift (at ends) | 11000 lbs (4989 kg) |
| Rear lift | 22760 lbs (10323 kg) |
| Rear Type | III |
PTO
| Clutch | electro-hydraulic |
|---|---|
| Engine RPM | 540E@1577 |
| Rear PTO | independent |
| Rear PTO Type | 1000/1000E (1.75) |
Electrical
| Batteries | 2 |
|---|---|
| Battery volts | 12 |
| Charging amps | 240 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Standard tires (ag) | Front: 480/70R34. Rear: 520/85R46 |
|---|---|
| Front axle | 4WD / 4WD Quadlink Suspension |
| Height (cab) | 141 inches (358 cm) |
| Length | 215.7 inches (547 cm) |
| Max weight | 33070 lbs (15000 kg) |
| Rear axle | 4.33 by 105 inches (109 by 2667 mm) / 4.33 by 118 inches (109 by 2997 mm) |
| Shipping weight | 24250 lbs (10999 kg) |
| Wheelbase | 122 inches (309 cm) |
| Front tire | 480/70R34 |
| Rear tire | 520/85R46 |
| Weight | 24250 lbs (10999 kg) |
| Wheelbase | 122 inches (309 cm) |
OCED Tractor Test 2719
| Description | Diesel Techstar CVT 4WDJanuary 2012 - May 2012, Link: OCED Tractor Test 2719 file / PTO performance / Drawbar performance / Pull at 9.08 KPH / Pull at 4.38 KPH |
|---|---|
| Fuel use | 14.7 gal/hour (55.6 l/hour) / 13.2 gal/hour (50.0 l/hour) / 14.5 gal/hour (54.9 l/hour) / 12.9 gal/hour (48.8 l/hour) |
| Max power | 276.7 hp (206.3 kW) / 192.2 hp (143.3 kW) |
| Max pull | 23855 lbs (10820 kg) |
| Power at rated engine speed | 237.5 hp (177.1 kW) |
| Power at rated PTO speed | 272.2 hp (203.0 kW) |
References
| Description | Challenger MT600D Series published in 2011, by AGCO |
|---|
Variants
| 8660 | similar Massey Ferguson model |
|---|
Nebraska Tractor Test Results
Test #S873This section is compiled from original Nebraska Tractor Test PDFs using AI-assisted extraction and human review. For full verification, download the source PDF above. Differences between reports, incomplete source data, and occasional extraction or data entry mistakes can occur.
Maximum Power & Fuel Consumption
Torque Statistics
| Maximum Torque | 892 lb.-ft. (1210 Nm) at 1500 rpm |
|---|---|
| Torque Rise | 0.503% |
PTO Power Curve
Maximum Power & Fuel Consumption Details
| Condition | HP | kW | RPM | Fuel gal/hr | DEF gal/hr |
|---|---|---|---|---|---|
| Maximum Power (1 Hour) | 276.70 | 206.30 | 1950 | 14.73 | 0.84 |
Varying Power & Fuel Consumption
Click column headers to sort
| Power | RPM | gal/hr | lb/hp·hr | hp·hr/gal | DEF gal/hr |
|---|---|---|---|---|---|
| 237.50 | 2100 | 13.22 | 0.39 | 17.97 | 0.73 |
| 203.60 | 2118 | 11.60 | 0.40 | 17.54 | 0.63 |
| 153.40 | 2128 | 9.27 | 0.42 | 16.55 | 0.50 |
| 102.70 | 2137 | 6.96 | 0.48 | 14.77 | 0.36 |
| 51.60 | 2146 | 4.75 | 0.65 | 10.86 | 0.21 |
| N/A | 2153 | 2.72 | N/A | N/A | 0.03 |