Challenger MT475E Specs ( 2017-2020 )
Production
| Description | Utility tractor / Built in France |
|---|---|
| Manufacturer | Challenger (a part of AGCO) |
Engine
| Engine type | AGCO Power 4.9L 4-cyl diesel |
|---|---|
| Exhaust fluid (DEF) | 7.9 gal (29.9 L) |
| Fuel tank | 67 gal (253.6 L) |
| Bore/Stroke | 4.251x5.276 inches (108 x 134 mm) |
| Description | AGCO Power / intercooled turbocharged diesel / 4-cylinder / liquid-cooled |
| Displacement | 299 ci (4.9 L) |
| Emission control | selective catalytic reduction |
| Emissions | Tier IV |
| Fuel system | high-pressure common rail direct injection |
| Maximum Power | 140 hp (104.4 kW) |
| Power | 130 hp (96.9 kW) |
| Rated RPM | 2100 |
| Starter | electric |
| Starter volts | 12 |
| Torque | 563 lb-ft (763.4 Nm) |
| Torque RPM | 1600 |
| Drawbar (tested) | 112.4 hp (83.8 kW) |
| PTO (claimed) | 120 hp (89.5 kW) |
| PTO (tested) | 126.2 hp (94.1 kW) |
Transmission
| Description | continuously-variable transmission |
|---|---|
| Gears | infinite forward and reverse |
| Transmission | TechStar CVT |
| Type | continuously-variable transmission |
Mechanical
| Cab | Cab standard with air-conditioning. Auto-Guide 3000 ((Optional)) |
|---|---|
| Description | Power steering / Hydraulic wet disc brakes |
| Differential lock | electro-hydraulic front and rear |
| Drive type | Four-wheel drive |
Hydraulics
| Pump flow | 26 gpm (98.4 lpm) |
|---|---|
| Type | open center |
| Valves | up to 5 |
Hitch
| Rear Arms | telescopic link end |
|---|---|
| Rear lift (at 24"/610mm) | 11244 lbs (5100 kg) |
| Rear Type | III/II |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 540/1000 |
Electrical
| Battery volts | 12 |
|---|---|
| Charging amps | 175 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Description | Flange rear axle / Bar rear axle |
|---|---|
| Shipping weight | 15432 lbs (6999 kg) |
| Wheelbase | 105 inches (266 cm) |
| Width | 72 inches*Minimum width (182 cm) |
| Weight | 15432 lbs (6999 kg) |
| Wheelbase | 105 inches (266 cm) |
OCED Tractor Test 3033
| Description | Diesel CVT 4WDOctober 2016 - November 2016, Link: OCED Tractor Test 3033 file / PTO performance / Drawbar performance / Pull at 7.45KPH / Pull at 3.52KPH |
|---|---|
| Fuel use | 7.7 gal/hour (29.1 l/hour) / 7.9 gal/hour (29.9 l/hour) / 8.2 gal/hour (31.0 l/hour) |
| Max power | 112.4 hp (83.8 kW) |
| Max pull | 15130 lbs (6862 kg) |
| Power at rated engine speed | 126.2 hp (94.1 kW) |
| Power at rated PTO speed | 132 hp (98.4 kW) |
References
| Description | MT400E Series Tractors published in 2016, by AGCO |
|---|
Variants
| 6714S | similar Massey Ferguson model |
|---|