Home / Challenger / MT465D

Challenger MT465D Specs ( 2014-2016 )

Compare Tractor

Overview

The Challenger MT465D is a utility farm tractor produced between 2014 and 2016 featuring an AGCO Power 4.9L 4-cylinder turbocharged diesel engine rated at 120 gross horsepower. It is equipped with a 16-speed AutoPower IV power shift transmission and a 4WD drivetrain with hydrostatic power steering.

Ideal Applications

Engine and Emissions Configuration: The 4.9L engine utilizes electronic high pressure common rail fuel delivery and selective catalytic reduction (SCR) to meet Interim Tier IV emissions standards.
Transmission and PTO Specifications: This model features a 16-speed four-speed power shift transmission with a wet disc clutch and an independent rear PTO capable of 540/1000 RPM.
Hydraulic and Hitch Capacity: The tractor is built with a closed center load sensing (CCLS) hydraulic system and a Category III/II rear hitch with a lift capacity of 11,400 lbs at 24 inches.

Production

Description Utility tractor
Manufacturer Challenger (a part of AGCO)

Engine

Engine type AGCO Power 4.9L 4-cyl diesel
Exhaust fluid (DEF) 9.2 gal (34.8 L)
Fuel tank 64 gal (242.2 L)
Air cleaner dual dry element
Bore/Stroke 4.251x5.276 inches (108 x 134 mm)
Description AGCO Power 49AWI / turbocharged air-to-air intercooled diesel / 4-cylinder 16-valve / liquid-cooled
Displacement 299 ci (4.9 L)
Emission control selective catalytic reduction (SCR)
Emissions Interim Tier IV
Fuel system electronic high pressure common rail
Power (gross) 120 hp (89.5 kW)
Pre-heating thermostart
Rated RPM 2200
Starter electric
Starter volts 12
Engine (gross) 120 hp (89.5 kW)
PTO (claimed) 100 hp (74.6 kW)

Transmission

Clutch wet disc
Description Four power shift gears in four ranges.
Gears 16 forward and reverse
Transmission AutoPower IV
Transmission type 16-speed four speed power shift
Type four speed power shift

Mechanical

Cab Cab standard with air-conditioning.
Description Wet disc brakes
Drive type Four-wheel drive
Steering hydrostatic power

Hydraulics

SCV flow 15 gpm (open center) (56.8 lpm)
Type closed center load sensing (CCLS)
Valves 2 to 4

Hitch

Control electronic lower link draft sensing
Drawbar Cat. 2
Rear lift (at 24"/610mm) 11400 lbs (5171 kg)
Rear Type III/II

PTO

Rear PTO independent
Rear PTO Type 540/1000

Electrical

Batteries 2
Battery CCA 600
Battery volts 12
Charging amps 175
Charging system alternator
Ground negative

Dimensions & Tires

Bar rear axle 3.23 by 80 inches (82 by 2032 mm) / 3.23 by 105 inches (82 by 2667 mm)
Description Flange rear axle
Shipping weight 12500 lbs (5670 kg)
Wheelbase 105 inches (266 cm)
Weight 12500 lbs (5670 kg)
Wheelbase 105 inches (266 cm)

References

Description Challenger MT400B Series published in 2013, by AGCO / Challenger MT400B Series published in 2014, by AGCO