Challenger MT295 Specs ( 2003-2005 )
Overview
The Challenger MT295 is a compact utility farm tractor manufactured by Iseki in Japan and distributed by AGCO from 2003 to 2005. It features a 2.2L 4-cylinder diesel engine rated at 44.2 gross horsepower and is equipped with a four-wheel drive system. The tractor was available with either a 16-speed power shuttle or a four-range hydrostatic transmission, supporting a Category I rear hitch and independent PTO.
Ideal Applications
Engine and PTO Performance:
The liquid-cooled Iseki diesel engine operates at a rated 2500 RPM, producing 44.2 gross horsepower and providing a claimed PTO output of 37.0 hp for gear transmissions or 36.0 hp for hydrostatic models.
Hydraulic System and Hitch Capacity:
Equipped with an open center hydraulic system delivering a total flow of 12.6 gpm at 2275 psi, the rear Type I hitch is rated for a lift capacity of 2600 lbs at 24 inches or 3086 lbs at the ends.
Chassis and Transmission Configuration:
The 4WD chassis features a 76-inch wheelbase and is listed with weights between 4277 and 4331 pounds, utilizing either 16 forward and reverse gears or an infinite four-range hydrostatic transmission.
Production
| Description | Compact Utility tractor / Built in Matsuyama, Japan |
|---|---|
| Distributor | Challenger (a part of AGCO) |
| Manufacturer | Iseki |
Engine
| Engine type | Iseki 2.2L 4-cyl diesel |
|---|---|
| Fuel tank | 12.7 gal (48.1 L) |
| Bore/Stroke | 3.43x3.64 inches (87 x 92 mm) |
| Description | Iseki / diesel / 4-cylinder / liquid-cooled |
| Displacement | 134.1 ci (2.2 L) |
| Power (gross) | 44.2 hp (33.0 kW) |
| Rated RPM | 2500 |
| Starter | electric |
| Starter volts | 12 |
| Engine (gross) | 44.2 hp (33.0 kW) |
| Gear PTO (claimed) | 37.0 hp (27.6 kW) |
| Hydro PTO (claimed) | 36 hp (26.8 kW) |
Transmission
| Description | Four synchronized gears (1-4) in four ranges with power shuttle. |
|---|---|
| Gears | 16 forward and reverse / infinite forward and reverse (4-range) |
| Type | power shuttle / hydrostatic |
| Description | hydrostatic |
| Transmission type | 16-speed power shuttle |
| Description | hydrostatic |
| Transmission type | 16-speed power shuttle |
Mechanical
| Description | Power steering / Wet disc brakes / Two-post folding ROPS. |
|---|---|
| Differential lock | mechanical rear |
| Drive type | Four-wheel drive |
Hydraulics
| Pressure | 2275 psi (156.9 bar) |
|---|---|
| Pump flow | 7.4 gpm (28.0 lpm) |
| Steering flow | 5.2 gpm (19.7 lpm) |
| Total flow | 12.6 gpm (47.7 lpm) |
| Type | open center |
Hitch
| Control | position and draft control |
|---|---|
| Rear lift (at 24"/610mm) | 2600 lbs (1179 kg) |
| Rear lift (at ends) | 3086 lbs (1399 kg) |
| Rear Type | I |
PTO
| Clutch | wet disc |
|---|---|
| Mid PTO | independent *Optional, available only with hydrostatic transmission. |
| Mid PTO Type | 2000 |
| Rear PTO | independent |
| Rear PTO Type | 540 (1.375) |
Electrical
| Battery volts | 12 |
|---|---|
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Industrial front | 10-16.5 |
|---|---|
| Industrial rear | 17.5-24 |
| Lawn/turf front | 29x12.00-15 / 27x12LL-15 |
| Lawn/turf rear | 475/65D-20 / 570-648 |
| Standard tires (ag) | Front: 9.5-16. Rear: 13.6-28 |
| Front tread | 52.5 inches (133 cm) |
| Gear Weight | 4277 lbs (1940 kg) |
| Height (Folded ROPS) | 72.7 inches (184 cm) |
| Height (ROPS) | 95.9 inches (243 cm) |
| Hydro Weight | 4331 lbs (1964 kg) |
| Length | 140.9 inches (357 cm) |
| Rear tread | 52 to 60 inches (132 to 152 cm) |
| Wheelbase | 76 inches (193 cm) |
| Width | 71.5 inches (181 cm) |
| Front tire | 9.5-16 |
| Rear tire | 13.6-28 |
| Weight | 4277 to 4331 pounds |
| Wheelbase | 76 inches (193 cm) |
Challenger MT295 attachments
| Description | front-end loader / backhoe |
|---|
References
| Description | MT200 - Serious Machines with big tractor performance published in 2002, by AGCO |
|---|
Variants
| 1445 | similar Massey Ferguson model |
|---|