Challenger MT265B Specs ( 2005-2008 )
Production
| Description | Compact Utility tractor / Built in Matsuyama, Japan |
|---|---|
| Distributor | Challenger (a part of AGCO) |
| Manufacturer | Iseki |
Engine
| Engine type | Iseki 1.5L 3-cyl diesel |
|---|---|
| Fuel tank | 10.6 gal (40.1 L) |
| Air cleaner | dual-stage dry |
| Bore/Stroke | 3.43x3.30 inches (87 x 84 mm) |
| Compression | 21.7:1 |
| Coolant capacity | 7.1 qts (6.7 L) |
| Description | Iseki E3CD-VB40 / diesel / 3-cylinder / liquid-cooled |
| Displacement | 91.4 ci (1.5 L) |
| Fuel system | indirect injection |
| Idle RPM | 980-2860 |
| Oil capacity | 5 qts (4.7 L) |
| Power (gross) | 33.0 hp (24.6 kW) |
| Power (net) | 32 hp (23.9 kW) |
| Pre-heating | glow plugs |
| Rated RPM | 2600 |
| Starter volts | 12 |
| Engine (gross) | 33.0 hp (24.6 kW) |
| Engine (net) | 32 hp (23.9 kW) |
| Gear PTO (claimed) | 26.0 hp (19.4 kW) |
| Hydro PTO (claimed) | 24.5 hp (18.3 kW) |
Transmission
| Clutch | mechanical dry disc / dry main, wet shuttle |
|---|---|
| Description | Four non-synchronized gears in two non-synchronized ranges, with synchronized shuttle shift. / Three ranges with four gears each. Transmission can be shifted from forward to reverse on the go, without the clutch. In-range gear changes can be made on the go with the clutch. |
| Gears | infinite forward and reverse (3-range) / 8 forward and reverse / 12 forward and reverse |
| Oil capacity | 32.8 qts (31.0 L) / 32.8 qts (31.0 L) / 32.8 qts (31.0 L) |
| Transmission | SynchroShuttle / PowerShuttle |
| Type | hydrostatic / partially synchronized with power shuttle |
| Description | hydrostatic |
| Transmission type | 8-speed / 12-speed partially synchronized with power shuttle |
| Description | hydrostatic |
| Transmission type | 8-speed / 12-speed partially synchronized with power shuttle |
Mechanical
| Description | Power steering / Wet disc brakes / Two-post foldable ROPS |
|---|---|
| Differential lock | mechanical rear |
| Drive type | Four-wheel drive |
| Final drives | spur gear |
Hydraulics
| Mid valves | 2 OptOptional |
|---|---|
| Pressure | 2276 psi (156.9 bar) |
| Pump flow | 8.3 gpm (31.4 lpm) |
| Rear valves | 2 OptOptional |
| Steering flow | 4.4 gpm (sync shuttle) (16.7 lpm) |
| Steering press. | 2276 psi (156.9 bar) |
| Total flow | 12.7 gpm (sync shuttle) (48.1 lpm) |
| Type | open center |
Hitch
| Control | position and response control |
|---|---|
| Rear Arms | fixed link ends ((sync shuttle) |
| Rear lift (at 24"/610mm) | 2535 lbs (1149 kg) |
| Rear lift (at ends) | 2800 lbs (1270 kg) |
| Rear Type | I |
PTO
| Clutch | electro-hydraulic wet disc |
|---|---|
| Mid PTO | independent OptOptional |
| Mid PTO Type | 2000 (1.00) |
| Rear PTO | independent |
| Rear PTO Type | 540 (1.375) |
Electrical
| Battery CCA | 630 |
|---|---|
| Battery volts | 12 |
| Charging amps | 40 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Ag front | 8-16 |
|---|---|
| Ag rear | 12.4-24 |
| Industrial front | 10-16.5 |
| Industrial rear | 14.9-24 |
| Lawn/turf front | 27x8.50-15 |
| Lawn/turf rear | 41x14.00-20 |
| Front tread | 45 inches (114 cm) |
| Ground clearance | 14.1 inches (35 cm) |
| Height (ROPS) | 87.4 inches (221 cm) |
| Length | 121 inches (307 cm) |
| Rear tread | 46.5 to 58.9 inches (118 to 149 cm) |
| Wheelbase | 69.7 inches (177 cm) |
| Width | 62.2 inches*Minimum width (157 cm) |
| Front tire | 8-16 |
| Rear tire | 12.4-24 |
| Weight | 3136 lbs (1422 kg) |
| Wheelbase | 69.7 inches (177 cm) |
Challenger MT265B Weight
| Max capacity | 6614 lbs (3000 kg) |
|---|---|
| Max front axle | 3968 lbs (1799 kg) |
| Max rear axle | 6968 lbs (3160 kg) |
Challenger MT265B attachments
| Description | front-end loader / backhoe |
|---|
References
| Description | MT200B Series published in 2005, by AGCO |
|---|
Speeds
| Description | With 12.4-24 R1 rear tires. / With 12.4-24 R1 rear tires. / With 12.4-24 R1 rear tires. |
|---|
Variants
| 1533 | similar Massey Ferguson model |
|---|