Overview
The CaseIH Steiger 400 is a 4WD farm tractor manufactured in Fargo, North Dakota between 2011 and 2013, featuring a 12.9L Iveco 6-cylinder diesel engine. This model is equipped with a 16-speed full power shift transmission and a Surveyor cab, delivering a tested maximum PTO power of 400.10 hp and a rear lift capacity of 20,000 lbs.
Ideal Applications
Tested Drawbar and PTO Performance:
OECD Tractor Test 2046 recorded a maximum drawbar power of 328.56 hp and a maximum pull of 39,843 lbs, while the PTO output was tested at 400.10 hp at 2100 rated engine RPM.
Engine and Emission Configuration:
The liquid-cooled Iveco engine utilizes a wastegate turbocharger with aftercooling and selective catalytic reduction to meet Interim Tier 4 emission standards.
Hydraulic and Hitch Specifications:
This tractor features a pressure flow compensating hydraulic system with a total flow of 42 gpm and a Category 4N rear hitch capable of lifting 20,000 lbs.
Production
| Description | Built in Fargo, North Dakota, USA |
|---|---|
| Drive type | Four-wheel Drive (4WD) tractor |
| Manufacturer | CaseIH |
Engine
| Engine type | Iveco 12.9L 6-cyl diesel |
|---|---|
| Exhaust fluid (DEF) | 46 gal (174.1 L) |
| Fuel tank | 310 gal (1173.4 L) |
| Bore/Stroke | 5.315x5.906 inches (135 x 150 mm) |
| Description | Iveco / wastegate turbocharged aftercooled diesel / 6-cylinder 24-valve / liquid-cooled |
| Displacement | 787 ci (12.9 L) |
| Emission control | selective catalytic reduction (SCR) |
| Emissions | Interim Tier 4 |
| Maximum Power | 440 hp (328.1 kW) |
| Power | 400 hp (298.3 kW) |
| Rated RPM | 2100 |
| Starter type | electric |
| Drawbar (tested) | 328.56 hp (245.0 kW) |
| PTO (claimed) | 340 hp (253.5 kW) |
| PTO (tested) | 400.10 hp (298.4 kW) |
Transmission
| Clutch | electro-hydraulic wet discs |
|---|---|
| Gears | 16 forward and 2 reverse |
| Transmission type | 16-speed full power shift |
| Type | full power shift |
Mechanical
| Description | Surveyor cab standard. |
|---|---|
| Drive type | Four-wheel drive |
Hydraulics
| Pump flow | 35 gpm (132.5 lpm) |
|---|---|
| Rear valves | 4 to 8 |
| Total flow | 42 gpm (159.0 lpm) |
| Type | pressure flow compensating (PFC) |
Hitch
| Rear lift | 20,000 lbs (9072 kg) |
|---|---|
| Rear Type | 4N |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 1000 (1-3/4) |
Electrical
| Batteries | 2 |
|---|---|
| Battery CCA | 1000 |
| Battery volts | 12 |
| Charging amps | 200 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Ballasted weight | 49,500 lbs (22453 kg) |
|---|---|
| Front axle | 5 by 120 inches (127 by 3048 mm) |
| Weight | 36,048 lbs (dual 710/70R42) (16351 kg) |
| Wheelbase | 148 inches (375 cm) |
| Weight | 36,048 lbs (16351 kg) |
| Wheelbase | 148 inches (375 cm) |
OCED Tractor Test 2046
| Description | Diesel 16-speed 4WD11/6/2012:11/12/2012Link: OCED Tractor Test 2046 file / PTO performance / Drawbar performance / Gear 5 used for power test. / Gear 1 used for pull test. |
|---|---|
| Fuel use | 21.7 gal/hour (82.1 l/hour) / 20.6 gal/hour (78.0 l/hour) / 21.6 gal/hour (81.8 l/hour) / 20.6 gal/hour (78.0 l/hour) |
| Max power | 400.10 hp (298.4 kW) / 328.56 hp (245.0 kW) |
| Max pull | 39843 lbs (18072 kg) |
| Power at rated engine speed | 354.77 hp (264.6 kW) |
| Power at rated PTO speed | 390.47 hp (291.2 kW) |
References
| Description | Steiger Series Tractors published in 2011, by CaseIH |
|---|
Steiger 400 Serial Number Location
| Description | Serial number plate on the front left tractor fender, near the steps. |
|---|