Overview
The CaseIH Steiger 335 is a four-wheel drive farm tractor produced in Fargo, North Dakota, between 2008 and 2010. It features a CNH 8.9L 6-cylinder diesel engine rated at 335 horsepower and was available with either a 16-speed or 24-speed full power shift transmission.
Ideal Applications
Tested Power and Efficiency:
OCED Tractor Test 1907 recorded a maximum power output of 323.31 hp at the PTO and 258.63 hp at the drawbar, with fuel consumption reaching 18.0 gallons per hour during maximum power testing.
Weight and Chassis Configuration:
Built on a 139-inch wheelbase with a 4-inch axle diameter, the tractor has a shipping weight of 29,760 lbs and a maximum weight capacity of 39,000 lbs.
Hydraulic and Hitch Capacity:
The unit is equipped with a parallel pressure flow compensated hydraulic system providing 40 gpm of pump flow and a Category 4N/3 rear hitch with a lift capacity of 15,669 lbs.
Production
| Description | Built in Fargo, North Dakota, USA |
|---|---|
| Drive type | Four-wheel Drive (4WD) tractor |
| Manufacturer | CaseIH |
| Original price | $212,829 (2010) |
Engine
| Engine type | CNH 8.9L 6-cyl diesel |
|---|---|
| Fuel tank | 200 gal (757.0 L) |
| Air cleaner | dual paper elements |
| Bore/Stroke | 4.488x5.689 inches (114 x 145 mm) |
| Compression | 16.6:1 |
| Description | CNH / turbocharged aftercooled diesel / 6-cylinder / liquid-cooled |
| Displacement | 540 ci (8.9 L) |
| Emissions | Tier 3 |
| Maximum Power | 368 hp (274.4 kW) |
| Power | 335 hp (249.8 kW) |
| Rated RPM | 2000 |
| Starter volts | 24 |
| Oil capacity | 29.2 qts (27.6 L) |
| Drawbar (tested) | 258.63 hp (192.9 kW) |
| PTO (claimed) | 273 hp (203.6 kW) |
| PTO (tested) | 323.31 hp (241.1 kW) |
Transmission
| Gears | 16 forward and 2 reverse / 24 forward and 6 reverse |
|---|---|
| Type | full power shift |
| Transmission type | 16-speed full power shift / 24-speed |
| Transmission type | 16-speed full power shift / 24-speed |
Mechanical
| Cab | Cab standard with heat and A/C, optional Luxury cab |
|---|---|
| Description | Integrated electro-hydraulic wet disc brakes |
| Drive type | Four-wheel drive |
| Steering | hydrostatic power |
Hydraulics
| Pump flow | 40 gpm (151.4 lpm) |
|---|---|
| Type | parallel pressure flow compensated (PFC) |
| Valves | 4 to 5 |
Hitch
| Rear lift (at 24"/610mm) | 15,669 lbs (7107 kg) |
|---|---|
| Rear Type | 4N/3 |
PTO
| Rear PTO | independent optional |
|---|---|
| Rear PTO Type | 1000 |
Electrical
| Batteries | 2 |
|---|---|
| Battery CCA | 1000 |
| Battery volts | 12 |
| Charging amps | 150 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Ag front | 20.8R42 |
|---|---|
| Ag rear | 20.8R42 |
| Front axle | 4x120 inch diameter (101 mm) |
| Rear axle | 4x120 inch diameter (101 mm) |
| Wheelbase | 139 inches (353 cm) |
| Width | 36.5 inches (frame) (92 cm) |
| Front tire | 20.8R42 |
| Rear tire | 20.8R42 |
| Weight | 29760 to 32120 pounds |
| Wheelbase | 139 inches (353 cm) |
CaseIH Steiger 335 Weight
| Max capacity | 39,000 lbs (17690 kg) |
|---|---|
| Operating | 32,120 lbs (14569 kg) |
| Shipping | 29,760 lbs (13499 kg) |
OCED Tractor Test 1907
| Description | Diesel 16-speed 4WDSeptember 19 - October 22, 2007Link: OCED Tractor Test 1907 file / PTO performance / Drawbar performance / Gear 5 used for power test. / Gear 3 used for pull test. |
|---|---|
| Fuel use | 18.0 gal/hour (68.1 l/hour) / 17.0 gal/hour (64.3 l/hour) / 16.9 gal/hour (64.0 l/hour) |
| Max power | 323.31 hp (241.1 kW) / 258.63 hp (192.9 kW) |
| Max pull | 31,197 lbs (14150 kg) |
| Power at rated engine speed | 285.76 hp (213.1 kW) |
References
| Description | Steiger Series Tractors published in 2007, by CaseIH |
|---|
Steiger 335 Serial Number Location
| Description | Serial number on the left side of the tractor, behind the step. |
|---|