Home / CaseIH / Puma 150 X

CaseIH Puma 150 X Specs ( 2018-Present )

Compare Tractor

Overview

The CaseIH Puma 150 X is a row-crop tractor produced since 2018 in St. Valentin, Austria, featuring a 6.7L FPT 6-cylinder diesel engine. This 4WD model is equipped with a partial power shift transmission, providing either 18 or 19 forward gears, and utilizes a pressure flow compensated hydraulic system.

Ideal Applications

Engine Performance and Output: The FPT turbocharged intercooled diesel engine is rated at 150 gross hp at 2200 RPM and produces a maximum torque of 516 lb-ft at 1500 RPM.
Hydraulic and Hitch Capacities: This configuration features a rear lift capacity of 14586 lbs at 24 inches and a pump flow rate of 29.1 gpm at 3045 psi.
Mechanical and Transmission Configuration: The tractor is built with an 18-speed or 19-speed partial power shift transmission, independent rear PTO supporting 540/540E/1000 speeds, and a 120-amp charging system.

Production

Description Row-Crop tractor / Built in St. Valentin, Austria
Manufacturer CaseIH

Engine

Engine type FPT 6.7L 6-cyl diesel
Exhaust fluid (DEF) 12.7 gal (48.1 L)
Fuel tank 87.2 gal (330.1 L)
Bore/Stroke 4.09x5.20 inches (104 x 132 mm)
Description FPT / turbocharged intercooled diesel / 6-cylinder 24-valve / liquid-cooled
Displacement 410.6 ci (6.7 L)
Emissions Stage IV
Maximum Power (gross) 165 hp (123.0 kW)
Rated Power (gross) 150 hp (111.9 kW)
Rated RPM 2200
Starter electric
Starter volts 12
Torque 516 lb-ft (699.7 Nm)
Torque RPM 1500
Engine (gross) 150 hp (111.9 kW)
Engine (max) 165 hp (123.0 kW)

Transmission

Gears 18 forward and 6 reverse / 19 forward and 6 reverse
Type partial power shift / partial power shift
Transmission type 18-speed partial power shift / 19-speed partial power shift
Transmission type 18-speed partial power shift / 19-speed partial power shift

Mechanical

Cab Cab standard with air-conditioning.
Description Power steering / Hydraulic wet disc brakes
Differential lock rear standard
Drive type Four-wheel drive
Trailer brakes hydraulic

Hydraulics

Mid valves 3
Pressure 3045 psi (210.0 bar)
Pump flow 29.1 gpm (110.1 lpm)
Rear valves 4
Type pressure flow compensated

Hitch

Control electronic draft control
Front lift 7873 lbs (3571 kg)
Rear lift (at 24"/610mm) 14586 lbs (6616 kg)
Rear Type III/II

PTO

Engine RPM 540@1969 / 1000@1895
Front PTO Type 1000
Rear PTO independent
Rear PTO Type 540/540E/1000 (1.375)

Electrical

Battery volts 12
Charging amps 120
Charging system alternator
Ground negative

Dimensions & Tires

Standard tires (ag) Front: 380/85R28. Rear: 460/85R38
Bar rear axle 98 inch length OptOptional (2489 mm)
Description Flange rear axle
Front tire 380/85R28
Rear tire 460/85R38