Home / CaseIH / JX1095C

CaseIH JX1095C Specs ( 2005-2008 )

Compare Tractor

Overview

The CaseIH JX1095C is a four-wheel drive utility tractor manufactured in Jesi, Italy, from 2005 to 2008. It is equipped with a 4.5L four-cylinder turbocharged diesel engine and features either a mechanical or power shuttle 12-speed transmission. Notable configurations include a Category II rear hitch with a 3,960-pound lift capacity and an optional cab or two-post folding ROPS.

Ideal Applications

Engine and PTO Performance: The CNH 4.5L turbocharged engine is rated at 90 gross horsepower and achieved a tested PTO output of 83.8 hp at 2300 RPM with a fuel consumption rate of 5.2 gallons per hour.
Hydraulic and Hitch Specifications: The tractor utilizes an open center hydraulic system with a 16.9 gpm pump flow and mechanical lower-link draft sensing to manage its 3,960-pound rear lift capacity.
Chassis and Weight Distribution: Built on an 86-inch wheelbase, the machine has an operating weight of 6,980 lbs and can be ballasted up to 8,045 lbs for increased traction and stability.

Production

Description Utility tractor / Built in Jesi, Italy
Manufacturer CaseIH

Engine

Engine type CNH 4.5L 4-cyl diesel
Fuel tank 23.5 gal (88.9 L)
Air cleaner dual paper elements
Bore/Stroke 4.094x5.197 inches (104 x 132 mm)
Compression 17.5:1
Description CNH / turbocharged diesel / 4-cylinder / liquid-cooled
Displacement 273.7 ci (4.5 L)
Fuel system direct injection
Power (gross) 90 hp (67.1 kW)
Pre-heating thermostart
Rated RPM 2300
Starter volts 12
Drawbar (tested) 74.3 hp (55.4 kW)
Engine (gross) 90 hp (67.1 kW)
PTO (claimed) 77 hp (57.4 kW)
PTO (tested) 83.8 hp (62.5 kW)

Transmission

Gears 12 forward and reverse / 12 forward and reverse
Type mechanical shuttle / power shuttle
Transmission type 12-speed mechanical shuttle / 12-speed power shuttle
Transmission type 12-speed mechanical shuttle / 12-speed power shuttle

Mechanical

Cab Two-post folding ROPS. Cab optional.
Description Power steering / Hydraulic wet disc brakes
Drive type Four-wheel drive

Hydraulics

Pressure 2755 psi (190.0 bar)
Pump flow 16.9 gpm (64.0 lpm)
Steering flow 9.4 gpm (35.6 lpm)
Type open center
Valves 1 to 4

Hitch

Control mechanical lower-link draft sensing.
Rear lift 3960 lbs (1796 kg)
Rear Type II

PTO

Clutch mechanical dry disc
Rear PTO independent
Rear PTO Type 540 (1.375)

Electrical

Battery CCA 730
Battery volts 12
Charging amps 120
Charging system alternator
Ground negative

Dimensions & Tires

Ballasted weight 8,045 lbs (3649 kg)
Length 157 inches (398 cm)
Operating weight 6,980 lbs (3166 kg)
Wheelbase 86 inches (218 cm)
Width 69.6 inches*Minimum width. (176 cm)
Weight 6,980 lbs (3166 kg)
Wheelbase 86 inches (218 cm)

CaseIH JX1095C Height

Cab 91.5 inches (232 cm)
ROPS 95.6 inches (242 cm)

OCED Tractor Test 2347

Description Diesel 12-speed 4WDSeptember 1 - October 1, 2005Link: OCED Tractor Test 2347 file / PTO performance / Drawbar performance / Gear 8 used for power test.
Fuel use 5.2 gal/hour (19.7 l/hour) / 5.2 gal/hour (19.7 l/hour) / 5.1 gal/hour (19.3 l/hour) / 5.1 gal/hour (19.3 l/hour)
Max power 83.8 hp (62.5 kW) / 74.3 hp (55.4 kW)
Power at rated engine speed 83.5 hp (62.3 kW)
Power at rated PTO speed 83.4 hp (62.2 kW)