Overview
The CaseIH JX1075C is a utility tractor manufactured in Jesi, Italy, between 2004 and 2008, featuring an Iveco 2.9L three-cylinder diesel engine. This model is available in two-wheel and four-wheel drive configurations and recorded a maximum tested PTO output of 64.5 hp during official performance evaluations.
Ideal Applications
Tested Performance Output:
According to OCED Tractor Test 2114, the unit produced 64.5 hp at the PTO and 55.3 hp at the drawbar using the 12th gear for power tests.
Hydraulic and Hitch Capacity:
The tractor is equipped with an open center hydraulic system providing 16.9 gpm of pump flow and a Category II rear hitch with a 3960 lb lift capacity.
Transmission and Chassis Variables:
The configuration includes a 16-speed mechanical or power shuttle transmission and operating weights that vary from 6085 lbs for 2WD models to a maximum ballasted weight of 7685 lbs.
Production
| Description | Utility tractor / Built in Jesi, Italy |
|---|---|
| Manufacturer | CaseIH |
Engine
| Engine type | Iveco 2.9L 3-cyl diesel |
|---|---|
| Fuel tank | 19.5 gal (73.8 L) |
| Drawbar (tested) | 55.3 hp (41.2 kW) |
| Engine (gross) | 75 hp (55.9 kW) |
| PTO (claimed) | 62 hp (46.2 kW) |
| PTO (tested) | 64.5 hp (48.1 kW) |
Transmission
| Gears | 16 forward and reverse / 16 forward and reverse |
|---|---|
| Type | mechanical shuttle / power shuttle |
| Transmission type | 16-speed mechanical shuttle / 16-speed power shuttle |
| Transmission type | 16-speed mechanical shuttle / 16-speed power shuttle |
Mechanical
| Cab | Two-post folding ROPS. Cab optional. |
|---|---|
| Description | Power steering / Hydraulic wet disc brakes |
| Drive type | Two- or four-wheel drive |
Hydraulics
| Pressure | 2755 psi (190.0 bar) |
|---|---|
| Pump flow | 16.9 gpm (64.0 lpm) |
| Steering flow | 9.4 gpm (35.6 lpm) |
| Type | open center |
| Valves | 1 to 4 |
Hitch
| Control | mechanical lower-link draft sensing. |
|---|---|
| Rear lift | 3960 lbs (1796 kg) |
| Rear Type | II |
PTO
| Clutch | mechanical dry disc |
|---|---|
| Rear PTO | independent |
| Rear PTO Type | 540 (1.375) |
Electrical
| Battery CCA | 730 |
|---|---|
| Battery volts | 12 |
| Cab Charging amps | 85 |
| Charging system | alternator |
| Ground | negative |
| ROPS Charging amps | 65 |
Dimensions & Tires
| 2WD Length | 155.7 inches (395 cm) |
|---|---|
| 2WD Wheelbase | 83.9 inches (213 cm) |
| 4WD Length | 154 inches (391 cm) |
| 4WD Wheelbase | 81.3 inches (206 cm) |
| Width | 69.6 inches*Minimum width. (176 cm) |
| 2WD Wheelbase | 83.9 inches (213 cm) |
| 4WD Wheelbase | 81.3 inches (206 cm) |
| Weight | 6085 to 6615 pounds |
CaseIH JX1075C Height
| Cab | 91.5 inches (232 cm) |
|---|---|
| ROPS | 95.6 inches (242 cm) |
CaseIH JX1075C Weight
| 2WD Operating | 6085 lbs (2760 kg) |
|---|---|
| 4WD Operating | 6615 lbs (3000 kg) |
| Ballasted | 7685 lbs (3485 kg) |
OCED Tractor Test 2114
| Description | Diesel 16-speed 4WDOctober 1, 2003 - February 1, 2004Link: OCED Tractor Test 2114 file / PTO performance / Drawbar performance / Gear 12 used for power test. |
|---|---|
| Fuel use | 4.0 gal/hour (15.1 l/hour) / 3.9 gal/hour (14.8 l/hour) / 3.9 gal/hour (14.8 l/hour) / 3.9 gal/hour (14.8 l/hour) |
| Max power | 64.5 hp (48.1 kW) / 55.3 hp (41.2 kW) |
| Power at rated engine speed | 63.8 hp (47.6 kW) |
| Power at rated PTO speed | 63.7 hp (47.5 kW) |
Nebraska Tractor Test Results
Test #Nebraska Summary 452
Test Date:
October 2003 - February 2004
Location:
Alma Mater Studiorum, University Di Bologna, Via Gandolfi, 19-40057, Cadriano, Bologna, Italy
This section is compiled from original Nebraska Tractor Test PDFs using AI-assisted extraction and human review. For full verification, download the source PDF above. Differences between reports, incomplete source data, and occasional extraction or data entry mistakes can occur.
Maximum Power & Fuel Consumption
Rated Engine Speed
63.80 hp
0.43 lb/hp·hr
Standard PTO Speed
63.70 hp
@ N/A rpm PTO
Torque Statistics
| Maximum Torque | 201.0 lb.-ft. (272.5 Nm) at 1421 rpm |
|---|---|
| Torque Rise | 37.8% |
PTO Power Curve
Varying Power & Fuel Consumption
Click column headers to sort
| Power | RPM | gal/hr | lb/hp·hr | hp·hr/gal | DEF gal/hr |
|---|---|---|---|---|---|
| 63.80 | 2298 | N/A | 0.43 | 16.19 | N/A |
| 55.40 | 2349 | N/A | 0.45 | 15.63 | N/A |
| 42.10 | 2396 | N/A | 0.47 | 14.82 | N/A |
| 28.50 | 2422 | N/A | 0.53 | 13.22 | N/A |
| 14.30 | 2465 | N/A | 0.72 | 9.70 | N/A |
| N/A | 2501 | N/A | N/A | N/A | N/A |