Home / CaseIH / Farmall 60A

CaseIH Farmall 60A Specs ( 2015-Present )

Compare Tractor

Overview

The CaseIH Farmall 60A is a utility tractor manufactured in India that has been in production since 2015. It is equipped with a 2.2L three-cylinder FPT turbocharged diesel engine and an 8-speed mechanical shuttle transmission. The tractor is available in 2WD and 4WD configurations with a rear Category II hitch and an open center hydraulic system.

Ideal Applications

Transmission and Clutch: The drivetrain features an 8-speed mechanical shuttle transmission with a 279mm dry disc clutch and planetary final drives.
Tested PTO Performance: According to Nebraska Tractor Test 2208, the 2WD model achieved a maximum PTO power of 59.54 hp with a peak fuel consumption rate of 4.4 gallons per hour.
Hitch and Hydraulic Flow: The open center hydraulic system provides a pump flow of 11.9 gpm and supports a rear Category II hitch with a lift capacity of 2,701 lbs at 24 inches.

Production

Description Utility tractor / Built in India
Manufacturer CaseIH

Engine

Engine type FPT 2.2L 3-cyl diesel
Fuel tank 13 gal (49.2 L)
Air cleaner dry
Bore/Stroke 3.70x4.21 inches (94 x 107 mm)
Description FPT / turbocharged aftercooled diesel / 3-cylinder 6-valve / liquid-cooled
Displacement 135.9 ci (2.2 L)
Emissions Tier IV
Fuel system electronic high-pressure common rail
Power (gross) 60 hp (44.7 kW)
Pre-heating glow plugs
Rated RPM 2600
Starter electric
Starter volts 12
Engine (gross) 60 hp (44.7 kW)
PTO (claimed) 51 hp (38.0 kW)
PTO (tested) 59.54 hp (44.4 kW)

Transmission

Clutch 279mm mechanical dry disc
Description Four gears in two ranges with shuttle.
Gears 8 forward and reverse
Transmission type 8-speed mechanical shuttle
Type mechanical shuttle

Mechanical

Description Power steering / Wet disc brakes / Two-post folding ROPS.
Differential lock mechanical rear
Drive type Two- or four-wheel drive
Final drives planetary

Hydraulics

Mid valves 0 or 2
Pump flow 11.9 gpm (45.0 lpm)
Rear valves 1 or 2
Steering flow 5.5 gpm (20.8 lpm)
Type open center

Hitch

Rear lift (at 24"/610mm) 2701 lbs (1225 kg)
Rear Type II

PTO

Engine RPM 540@2575
Rear PTO independent
Rear PTO Type 540 (1.375)

Electrical

Battery volts 12
Charging amps 75
Charging system alternator
Ground negative

Dimensions & Tires

2WD Standard tires (ag) Front: 7.5x16. Rear: 13.6x28
Industrial front 12.5x18
Industrial rear 18.4x24
2WD Front tread 56 to 77.6 inches (142 to 197 cm)
2WD Height 92.7 inches (235 cm)
2WD Length 129.5 inches (328 cm)
2WD Weight 4442 lbs (2014 kg)
2WD Wheelbase 96.4 inches (244 cm)
4WD Front tread 61.3 to 69.2 inches (155 to 175 cm)
4WD Height 97.4 inches (247 cm)
4WD Length 134 inches (340 cm)
4WD Weight 5060 lbs (2295 kg)
4WD Wheelbase 97.6 inches (247 cm)
Flange rear axle 53.9 inch length (1369 mm)
Rear tread 52.6 to 68.4 inches (133 to 173 cm)
Width 67.5 inches (171 cm)
2WD Rear tire 13.6x28
2WD Wheelbase 96.4 inches (244 cm)
4WD Wheelbase 97.6 inches (247 cm)
Front tire 7.5x16
Weight 4442 to 5060 pounds

CaseIH Farmall 60A attachments

Description front-end loader

Nebraska Tractor Test 2199

Description Diesel 8-speed 4WDAugust 29 - 29, 2018Link: Nebraska Tractor Test 2199 file / PTO performance
Fuel use 3.3 gal/hour (12.5 l/hour) / 3.9 gal/hour (14.8 l/hour) / 3.9 gal/hour (14.8 l/hour)
Max power 48.72 hp (36.3 kW)
Power at rated engine speed 46.76 hp (34.9 kW)
Power at rated PTO speed 47.91 hp (35.7 kW)

Nebraska Tractor Test 2208

Description Diesel 8-speed 2WDJanuary 15 - 17, 2019Link: Nebraska Tractor Test 2208 file / PTO performance
Fuel use 3.9 gal/hour (14.8 l/hour) / 4.4 gal/hour (16.7 l/hour) / 4.3 gal/hour (16.3 l/hour)
Max power 59.54 hp (44.4 kW)
Power at rated engine speed 58.48 hp (43.6 kW)
Power at rated PTO speed 57.99 hp (43.2 kW)

References

Description Utility Farmall A Series Tractors published in 2016, by CaseIH* / Utility Farmall A Series Tractors published in 2017, by CaseIH / Farmall Utility Series Tractors published in 2021, by CaseIH / Farmall Utility Series Tractors published in 2022, by CaseIH / *Publication contains known errors.

Speeds

Description Reverse speeds are about 5% faster than forward.

Tractor Tests

Description NTTL 2199: diesel 8-speed 4WD / NTTL 2208: diesel 8-speed 2WD

Nebraska Tractor Test Results

Test #2208
Download PDF
Test Date: January 15-17, 2019
Location: Nebraska Tractor Test Laboratory, University of Nebraska, Lincoln Nebraska 68583-0832

This section is compiled from original Nebraska Tractor Test PDFs using AI-assisted extraction and human review. For full verification, download the source PDF above. Differences between reports, incomplete source data, and occasional extraction or data entry mistakes can occur.

Maximum Power & Fuel Consumption

Max Power (1 Hour)
59.54 hp
@ 2251 rpm
Rated Engine Speed
58.48 hp
N/A lb/hp·hr
Standard PTO Speed
57.99 hp
@ N/A rpm PTO

Torque Statistics

Maximum Torque 159 lb.-ft. (216 Nm) at 1797 rpm
Torque Rise 34.6%

PTO Power Curve

67 50 34 17 0 58 hp @ 0 rpm 58 0 51 hp @ 0 rpm 51 0 38 hp @ 0 rpm 38 0 26 hp @ 0 rpm 26 0 13 hp @ 0 rpm 13 0 1 hp @ 0 rpm 1 0 MAX: 58.5 HP ENGINE RPM POWER (HP)

Maximum Power & Fuel Consumption Details

Condition HP kW RPM Fuel gal/hr Fuel L/hr
Rated Engine Speed 58.48 43.61 2599 4.45 16.83
Maximum Power (1 Hour) 59.54 44.40 2251 3.94 14.93

Varying Power & Fuel Consumption

Click column headers to sort

Power RPM gal/hr lb/hp·hr hp·hr/gal DEF gal/hr
58.48 2599 4.45 0.53 13.15 N/A
50.72 2652 4.10 0.56 12.38 N/A
38.30 2671 3.34 0.61 11.45 N/A
25.83 2703 2.37 0.64 10.92 N/A
12.96 2714 1.70 0.92 7.63 N/A
1.29 2731 1.21 6.53 1.07 N/A