Home / CaseIH / Farmall 50A

CaseIH Farmall 50A Specs ( 2015-Present )

Compare Tractor

Overview

The CaseIH Farmall 50A is a utility tractor produced since 2015, powered by an FPT 2.2L three-cylinder turbocharged diesel engine with a gross rating of 50 horsepower. It is equipped with an 8-speed mechanical shuttle transmission and offers both 2WD and 4WD configurations with a Category II rear hitch. Official Nebraska Tractor Test 2190 recorded a tested PTO power of 46.39 hp at rated engine speed and 46.56 hp at rated PTO speed.

Ideal Applications

Engine and Fuel System: The FPT 2.2L engine utilizes electronic high-pressure common rail injection and is Tier IV emissions compliant with a 13-gallon fuel tank capacity.
Hydraulic Output: The open center hydraulic system is rated for an 11.9 gpm pump flow and a 5.5 gpm steering flow, supporting up to 2 mid-valves and 2 rear valves.
Transmission and Final Drive: The 8-speed mechanical shuttle transmission uses a 279mm mechanical dry disc clutch and planetary final drives, with reverse speeds approximately 5% faster than forward speeds.

Production

Description Utility tractor / Built in India
Manufacturer CaseIH

Engine

Engine type FPT 2.2L 3-cyl diesel
Fuel tank 13 gal (49.2 L)
Air cleaner dry
Bore/Stroke 3.70x4.21 inches (94 x 107 mm)
Compression 17.5:1
Description FPT / turbocharged aftercooled diesel / 3-cylinder 6-valve / liquid-cooled
Displacement 135.9 ci (2.2 L)
Emissions Tier IV
Fuel system electronic high-pressure common rail
Power (gross) 50 hp (37.3 kW)
Pre-heating glow plugs
Rated RPM 2600
Starter electric
Starter volts 12
Engine (gross) 50 hp (37.3 kW)
PTO (claimed) 46 hp (34.3 kW)
PTO (tested) 46.39 hp (34.6 kW)

Transmission

Clutch 279mm mechanical dry disc
Description Four gears in two ranges with shuttle.
Gears 8 forward and reverse
Transmission type 8-speed mechanical shuttle
Type mechanical shuttle

Mechanical

Description Power steering / Wet disc brakes / Two-post folding ROPS.
Differential lock mechanical rear
Drive type Two- or four-wheel drive
Final drives planetary

Hydraulics

Mid valves 0 or 2
Pump flow 11.9 gpm (45.0 lpm)
Rear valves 1 or 2
Steering flow 5.5 gpm (20.8 lpm)
Type open center

Hitch

Rear lift (at 24"/610mm) 2701 lbs (1225 kg)
Rear Type II

PTO

Engine RPM 540@2575
Rear PTO independent
Rear PTO Type 540 (1.375)

Electrical

Battery volts 12
Charging amps 75
Charging system alternator
Ground negative

Dimensions & Tires

2WD Standard tires (ag) Front: 7.5x16. Rear: 13.6x28
Industrial front 12.5x18
Industrial rear 18.4x24
2WD Front tread 56 to 77.6 inches (142 to 197 cm)
2WD Height 92.7 inches (235 cm)
2WD Length 129.5 inches (328 cm)
2WD Weight 4442 lbs (2014 kg)
2WD Wheelbase 96.4 inches (244 cm)
4WD Front tread 61.3 to 69.2 inches (155 to 175 cm)
4WD Height 97.4 inches (247 cm)
4WD Length 134 inches (340 cm)
4WD Weight 5060 lbs (2295 kg)
4WD Wheelbase 97.6 inches (247 cm)
Flange rear axle 53.9 inch length (1369 mm)
Rear tread 52.6 to 68.4 inches (133 to 173 cm)
Width 67.5 inches (171 cm)
2WD Rear tire 13.6x28
2WD Wheelbase 96.4 inches (244 cm)
4WD Wheelbase 97.6 inches (247 cm)
Front tire 7.5x16
Weight 4442 to 5060 pounds

CaseIH Farmall 50A attachments

Description front-end loader

Nebraska Tractor Test 2190

Description Diesel 8-speed 4WDFebruary 20 - 21, 2018Link: Nebraska Tractor Test 2190 file / PTO performance
Fuel use 3.7 gal/hour (14.0 l/hour) / 3.7 gal/hour (14.0 l/hour)
Power at rated engine speed 46.39 hp (34.6 kW)
Power at rated PTO speed 46.56 hp (34.7 kW)

References

Description Utility Farmall A Series Tractors published in 2016, by CaseIH* / Farmall Utility Series Tractors published in 2021, by CaseIH / *Publication contains known errors.

Speeds

Description Reverse speeds are about 5% faster than forward.

Nebraska Tractor Test Results

Test #2190
Download PDF
Test Date: February 20 - 21, 2018
Location: Nebraska Tractor Test Laboratory, University of Nebraska, Lincoln Nebraska 68583-0832

This section is compiled from original Nebraska Tractor Test PDFs using AI-assisted extraction and human review. For full verification, download the source PDF above. Differences between reports, incomplete source data, and occasional extraction or data entry mistakes can occur.

Maximum Power & Fuel Consumption

Rated Engine Speed
46.39 hp
0.56 lb/hp·hr
Standard PTO Speed
46.56 hp
@ N/A rpm PTO

Torque Statistics

Maximum Torque 112 lb.-ft. (151 Nm) at 1750 rpm
Torque Rise 19.1%

PTO Power Curve

53 40 27 13 0 46 hp @ 2600 rpm 46 2600 40 hp @ 2626 rpm 40 2626 30 hp @ 2664 rpm 30 2664 20 hp @ 2682 rpm 20 2682 10 hp @ 2702 rpm 10 2702 1 hp @ 2711 rpm 1 2711 MAX: 46.4 HP ENGINE RPM POWER (HP)

Maximum Power & Fuel Consumption Details

Condition HP kW RPM
Rated Engine Speed 46.39 34.60 2600

Varying Power & Fuel Consumption

Click column headers to sort

Power RPM gal/hr lb/hp·hr hp·hr/gal DEF gal/hr
46.39 2600 N/A 0.56 12.46 N/A
39.85 2626 N/A 0.61 11.46 N/A
30.35 2664 N/A 0.68 10.30 N/A
20.36 2682 N/A 0.83 8.39 N/A
10.26 2702 N/A 1.32 5.29 N/A
0.66 2711 N/A 16.25 0.43 N/A