Home / CaseIH / Farmall 25SC

CaseIH Farmall 25SC Specs ( 2024-Present )

Compare Tractor

Overview

The CaseIH Farmall 25SC is a sub-compact utility tractor manufactured by LS in South Korea and distributed by CNH for the 2024-Present production period. This four-wheel drive model is powered by a 1.3L Yanmar 3-cylinder diesel engine rated at 24.7 gross horsepower and features a 2-range hydrostatic transmission.

Ideal Applications

Mechanical and Transmission Configuration: Equipped with a hydrostatic transmission offering infinite forward and reverse gears across two ranges, the tractor includes mechanical rear differential lock and power steering.
Tested Performance and Lift Capacity: Nebraska Tractor Test data recorded a maximum pull of 3,226 lbs, while the Category I rear hitch is rated for a lift capacity of 728 lbs at 24 inches or 991 lbs at the ends.
Implement and PTO Interface: The unit features both a 2500 RPM independent mid PTO and a 540 RPM independent rear PTO utilizing an electro-hydraulic clutch, with a front-end loader listed as a primary attachment.

Production

Description Sub-Compact Utility tractor / Built in South Korea
Distributor CaseIH (a part of CNH)
Manufacturer LS

Engine

Engine type Yanmar 1.3L 3-cyl diesel
Fuel tank 6.6 gal (25.0 L)
Bore/Stroke 3.15x3.30 inches (80 x 84 mm)
Description Yanmar / diesel / 3-cylinder / liquid-cooled
Displacement 77.2 ci (1.3 L)
Emissions Tier IV
Power (gross) 24.7 hp (18.4 kW)
Rated RPM 3000
Starter electric
Starter volts 12
Engine (gross) 24.7 hp (18.4 kW)
PTO (claimed) 17.2 hp (12.8 kW)

Transmission

Description hydrostatic
Gears infinite forward and reverse (2-range)
Type hydrostatic

Mechanical

Cab Two-post folding ROPS. Cab optional.
Description Power steering
Differential lock mechanical rear
Drive type Four-wheel drive

Hydraulics

Rear valves 1 OptOptional
Type open center

Hitch

Rear lift (at 24"/610mm) 728 lbs (330 kg)
Rear lift (at ends) 991 lbs (449 kg)
Rear Type I

PTO

Clutch electro-hydraulic
Mid PTO independent
Mid PTO Type 2500
Rear PTO independent
Rear PTO Type 540 (1.375)

Electrical

Battery volts 12
Charging amps 40
Charging system alternator
Ground negative

Dimensions & Tires

Industrial front 18x8.5-10
Industrial rear 26x12-12
Lawn/turf front 18x8.5-10
Lawn/turf rear 26x12-12
Cab Weight 1884 lbs (854 kg)
Height (cab) 92.3 inches (234 cm)
Height (Folded ROPS) 62.4 inches (158 cm)
Height (ROPS) 87.4 inches (221 cm)
Length 97 inches (246 cm)
ROPS Weight 1444 lbs (654 kg)
Wheelbase 56 inches (142 cm)
Weight 1444 to 1884 pounds
Wheelbase 56 inches (142 cm)

CaseIH Farmall 25SC attachments

Description front-end loader

Farmall 25SC Serial Numbers

Location: Serial number plate on the left side of the frame, above the front axle.

References

Description Farmall Subcompact 25SC Specifications published in 2023, by CaseIH

Variants

Workmaster 25S similar New Holland model

Nebraska Tractor Test Results

Test #497
Download PDF
Test Date: June 16 to June 26, 1953
Location: Department of Agricultural Engineering, University of Nebraska College of Agriculture, Lincoln, Nebraska

This section is compiled from original Nebraska Tractor Test PDFs using AI-assisted extraction and human review. For full verification, download the source PDF above. Differences between reports, incomplete source data, and occasional extraction or data entry mistakes can occur.

No PTO performance data available.