Home / CaseIH / Farmall 120C

CaseIH Farmall 120C Specs ( 2015-Present )

Name: CaseIH Farmall 120C
Brand: CaseIH

Compare Tractor

[ NO IMAGE AVAILABLE ]

Nebraska Test #S1135

CASE IH FARMALL 120C DIESEL

Max Drawbar HP 88.0 hp

Max Pull 6,910 lbs

View Full Test Data →

Overview

The CaseIH Farmall 120C is a utility tractor produced from 2015 to the present, featuring a 117-hp FPT 3.4L four-cylinder diesel engine. This model is available in 2WD or 4WD configurations with either a two-post ROPS or an optional climate-controlled cab, providing a weight range between 6,989 and 8,157 pounds. Tested performance metrics include a maximum PTO output of 106.1 hp and a maximum drawbar pull of 6,910 pounds according to OCED Tractor Test 3008.

Ideal Applications

Tested Engine and PTO Performance: Nebraska Tractor Test data recorded a maximum PTO output of 106.1 hp and a fuel consumption rate of 5.7 gallons per hour at rated PTO speed.

Transmission and Drive Configuration: This tractor is available with 12-speed mechanical or power shuttle transmissions, as well as a 24-speed variant with a two-speed high-low shift.

Hydraulic and Hitch Capacity: The open-center hydraulic system provides a pump flow of 16.9 gpm, supporting a Category II/I rear hitch with a lift capacity of 4,339 lbs at 24 inches.

Production

Description	Utility tractor
Manufacturer	CaseIH (a part of CNH)
Original price	$59,414 (2016 mech-shuttle ROPS 2WD )

Engine

Engine type	FPT 3.4L 4-cyl diesel
Exhaust fluid (DEF)	2.8 gal (10.6 L)
Fuel tank	30.3 gal (114.7 L)
Bore/Stroke	3.90x4.33 inches (99 x 110 mm)
Description	FPT / wastegate turbocharged and aftercooled diesel / 4-cylinder / liquid-cooled
Displacement	207 ci (3.4 L)
Emission control	selective catalytic reduction with cooled exhaust-gas recirculation (SCR)
Emissions	Tier 4
Fuel system	high pressure common rail electronic direct injection
Power (gross)	117 hp (87.2 kW)
Starter	electric
Starter volts	12
Drawbar (tested)	76 hp (56.7 kW)
Engine (gross)	117 hp (87.2 kW)
PTO (claimed)	99 hp (73.8 kW)
PTO (tested)	106.1 hp (79.1 kW)

Transmission

Description	Four synchronized gears in three non-synchronized ranges with mechanical shuttle shift. / Four synchronized gears in three non-synchronized ranges with power shuttle shift. / Four synchronized gears in three non-synchronized ranges with power shuttle shift and two-speed high-low shift.
Gears	12 forward and reverse / 12 forward and reverse / 24 forward and reverse
Type	mechanical shuttle / power shuttle
Transmission type	12-speed mechanical shuttle / 12-speed power shuttle / 24-speed
Transmission type	12-speed mechanical shuttle / 12-speed power shuttle / 24-speed

Mechanical

Cab	Two-post ROPS. Cab optional with air-conditioning.
Description	Power steering / Wet disc brakes
Drive type	Two- or four-wheel drive
Final drives	inboard planetary

Hydraulics

Pump flow	16..9 gpm (60.6 lpm)
Type	open center
Valves	2 or 3

Hitch

Control	top link draft sensing
Drawbar	swinging extendable drawbar
Rear Arms	telescopic link ends
Rear lift (at 24"/610mm)	4339 lbs (1968 kg)
Rear Type	II/I

PTO

Rear PTO	independent
Rear PTO Type	540/540E

Electrical

Battery volts	12
Charging system	alternator
Ground	negative

Dimensions & Tires

2WD Standard tires (ag)	Front: 7.50x16. Rear: 16.9R30
4WD Standard tires (ag)	Front: 11.2R24. Rear: 16.9R30 / Front: 14.9R24. Rear: 18.4R34
2WD Length	163.1 inches (414 cm)
2WD Wheelbase	92.2 inches (234 cm)
4WD Length	160.1 inches (406 cm)
4WD Wheelbase	90 inches (228 cm)
Description	Flange rear axle
Height (cab)	102.1 inches (259 cm)
Height (ROPS)	106.5 inches (270 cm)
Width	75.7 inches (192 cm)
2WD Rear tire	16.9R30
2WD Wheelbase	92.2 inches (234 cm)
4WD Wheelbase	90 inches (228 cm)
Front tire	7.50x16
Weight	6989 to 8157 pounds

CaseIH Farmall 120C Weight

2WD Cab	7474 lbs (3390 kg)
2WD ROPS	6989 lbs (3170 kg)
4WD Cab	8157 lbs (3700 kg)
4WD ROPS	7672 lbs (3480 kg)

CaseIH Farmall 120C attachments

Description	front-end loader

OCED Tractor Test 3008

Description	Diesel 12-speed 4WDApril 2016 - 2016, Link: OCED Tractor Test 3008 file / PTO performance / Drawbar performance / Gear 4M used for power test. / Gear 3M used for pull test.
Fuel use	5.7 gal/hour (21.6 l/hour) / 5.9 gal/hour (22.3 l/hour) / 5.7 gal/hour (21.6 l/hour) / 5.7 gal/hour (21.6 l/hour)
Max power	106.1 hp (79.1 kW) / 76 hp (56.7 kW)
Max pull	6910 lbs (3134 kg)
Power at rated engine speed	100.3 hp (74.8 kW)
Power at rated PTO speed	106.1 hp (79.1 kW)

References

Description	Farmall C Series Tractor Specifications published in 2015, by CaseIH / Farmall Utility Series Tractors published in 2021, by CaseIH

Variants

PowerStar 120	similar New Holland model

Nebraska Tractor Test Results

Test #S1135

Download PDF

Test Date: May, 2016

Location: Alma Mater Studiorum, University Di Bologna, Via Gandolfi, 19-40057, Cadriano, Bologna, Italy

This section is compiled from original Nebraska Tractor Test PDFs using AI-assisted extraction and human review. For full verification, download the source PDF above. Differences between reports, incomplete source data, and occasional extraction or data entry mistakes can occur.

PTO Drawbar Hydraulics Technical Sound Tires & Weight

Maximum Power & Fuel Consumption

Max Power (1 Hour)

106.10 hp

@ 1958 rpm

Rated Engine Speed

100.30 hp

N/A lb/hp·hr

Standard PTO Speed

106.10 hp

@ N/A rpm PTO

Torque Statistics

Maximum Torque	330 lb-ft (448 Nm)
Torque Rise	44.4%

PTO Power Curve

Maximum Power & Fuel Consumption Details

Condition	HP	kW	RPM	Fuel gal/hr	DEF gal/hr
Maximum Power (1 Hour)	106.10	79.10	1958	5.74	0.13

Varying Power & Fuel Consumption

Click column headers to sort

Power	RPM	gal/hr	lb/hp·hr	hp·hr/gal	DEF gal/hr
100.30	2302	5.91	0.41	16.97	0.23
86.20	2327	5.25	0.43	16.41	0.20
65.30	2353	4.38	0.47	14.92	0.17
44.00	2378	3.35	0.53	13.15	0.12
22.20	2400	2.30	0.72	9.67	0.10
N/A	2414	1.44	N/A	N/A	0.05

Drawbar Performance At 1960 Engine RPM (Unballasted) Front Drive Engaged Maximum Power In Selected Gears

Click column headers to sort

Gear	Power	kW	Pull (lbs)	Pull (kN)	Speed	RPM	Slip	Cool °F	Barometer Inch Hg	Def Consumption Kg Kw H	Def Consumption Lb Hp Hr	Fuel Consumption Hp Hr Gal	Fuel Consumption Kg Kw H	Fuel Consumption Kw H L	Fuel Consumption Lb Hp Hr	Speed Km H	Temp Air Dry F
7th (3M) Gear	73.60	54.90	6,910	30.73	4.00	2301	15.00	198	29.90	0.02	0.03	12.49	0.34	2.46	0.56	6.43	72
8th (4M) Gear	82.20	61.30	6,340	28.21	4.86	1955	12.00	198	29.90	0.02	0.03	13.86	0.31	2.73	0.51	7.82	72
9th (1H) Gear	88.00	65.60	5,220	23.21	6.32	1952	7.90	198	29.90	0.01	0.02	14.77	0.29	2.91	0.47	10.18	72
10th (2H) Gear	87.30	65.10	3,255	14.48	10.06	1957	4.30	196	29.90	0.01	0.02	14.87	0.29	2.93	0.47	16.19	70

Unballasted Front Drive Engaged Fuel Consumption Characteristics

Click column headers to sort

Power	kW	Pull (lbs)	Pull (kN)	Speed	RPM	Slip	Cool °F	Barometer Inch Hg	Condition	Def Consumption Kg Kw H	Def Consumption Lb Hp Hr	Fuel Consumption Hp Hr Gal	Fuel Consumption Kg Kw H	Fuel Consumption Kw H L	Fuel Consumption Lb Hp Hr	Speed Km H	Temp Air Dry F
76.00	56.70	4,690	20.86	6.08	2303	6.90	201	29.90	Power at Rated Engine Speed-8th (4M) Gear	0.02	0.03	13.25	0.32	2.61	0.53	9.78	72
59.70	44.50	3,520	15.65	6.37	2354	4.60	201	29.90	75% of Pull at Rated Engine Speed-8th (4M) Gear	0.01	0.02	13.97	0.30	2.75	0.50	10.25	72
40.60	30.30	2,345	10.43	6.50	2369	3.30	203	29.90	50% of Pull at Rated Engine Speed-8th (4M) Gear	0.02	0.03	10.91	0.39	2.15	0.64	10.46	73
59.70	44.50	3,520	15.65	6.37	1893	4.60	201	29.90	75% of Pull at Reduced Engine Speed-9th (1H) Gear	0.01	0.02	12.64	0.34	2.49	0.55	10.25	72
40.60	30.30	2,345	10.43	6.50	1905	3.30	203	29.90	50% of Pull at Reduced Engine Speed-9th (1H) Gear	0.02	0.03	11.83	0.36	2.33	0.59	10.46	72

Engine

Make	F.P.T Industrial
Type	Four cylinder vertical with turbocharger, air to air intercooler and D.E.F. (diesel exhaust fluid) exhaust treatment
Displacement	207 cu in (3387 ml)
Compression Ratio	17.0 to 1
Rated Engine Speed	2300 rpm
Air Cleaner	two paper elements
Exhaust	DOC (diesel oxidation catalyst) and SCR (selective catalyst reduction) integrated within a vertical muffler
Crankshaft	lengthwise

Chassis

Type	front wheel assist
Steering	hydrostatic
Transmission	selective gear fixed ratio
Speeds	12 forward (24.84 mph max)
Wheelbase	90.00 in (2285 mm)
Front Tread Width	48.6 to 76.7 in
Rear Tread Width	52.6 to 76.3 in
Brakes	single wet disc operated by two foot pedals which can be locked together
Hydraulic Control	direct engine drive
Unladen Tractor Mass	3,740 kg

Consumables

Fuel	No. 2 Diesel
DEF Fluid	32% aqueous urea solution
Engine Oil	SAE 10W30

Tires & Tracks

Rear Tires	Two 460/85R34; **; 23 (160)
Front Tires	Two 380/85R24; **; 23 (160)
Height of Drawbar	18.1 in (460 mm)

Static Weight

Rear	5,050 lbs
Front	3,360 lbs
Total	8,410 lbs

CaseIH Farmall 120C Specs ( 2015-Present )

Overview

Ideal Applications

Production

Engine

Transmission

Mechanical

Hydraulics

Hitch

PTO

Electrical

Dimensions & Tires

CaseIH Farmall 120C Weight

CaseIH Farmall 120C attachments

OCED Tractor Test 3008

References

Variants

Nebraska Tractor Test Results

PTO Performance

Maximum Power & Fuel Consumption

Torque Statistics

PTO Power Curve

Maximum Power & Fuel Consumption Details

Varying Power & Fuel Consumption

Drawbar Performance

Drawbar Performance At 1960 Engine RPM (Unballasted) Front Drive Engaged Maximum Power In Selected Gears

Unballasted Front Drive Engaged Fuel Consumption Characteristics

Hydraulic Performance

Lift Capacity

Technical Specifications

Engine

Chassis

Consumables

Sound Levels

Sound Levels

At No Load In 7th 3m Gear

Tires & Weight

Tires & Tracks

Static Weight

Test Remarks