Home / CaseIH / Farmall 100C

CaseIH Farmall 100C Specs ( 2015-Present )

Name: CaseIH Farmall 100C
Brand: CaseIH

Compare Tractor

[ NO IMAGE AVAILABLE ]

Nebraska Test #S1133

CASE IH FARMALL 100C

Max Drawbar HP 73.1 hp

Max Pull 6,830 lbs

View Full Test Data →

Overview

The CaseIH Farmall 100C is a utility farm tractor produced since 2015, featuring a 3.4L 4-cylinder FPT engine rated at 99 gross horsepower. The model is available in both 2WD and 4WD configurations with options for either a two-post ROPS or a climate-controlled cab, weighing between 6,989 and 8,157 pounds depending on the build. Standard equipment includes a Tier 4 emission-compliant fuel system with Selective Catalytic Reduction and a rear PTO rated at 540 RPM.

Ideal Applications

Tested Power Output: The OCED Tractor Test 3004 recorded a maximum PTO performance of 85.8 horsepower and a maximum drawbar pull of 6,830 pounds using a 12-speed transmission configuration.

Hydraulic and Hitch Capacity: Equipped with an open center hydraulic system providing 16.9 gpm of pump flow, the rear Category II/I hitch is rated for a lift capacity of 4,339 pounds at 24 inches.

Transmission and Drive Options: This model is listed with three transmission variants including a 12-speed mechanical shuttle, a 12-speed power shuttle, and a 24-speed version with a two-speed high-low shift.

Production

Description	Utility tractor
Manufacturer	CaseIH (a part of CNH)
Original price	$53,227 (2016 mech-shuttle ROPS 2WD )

Engine

Engine type	FPT 3.4L 4-cyl
Exhaust fluid (DEF)	2.8 gal (10.6 L)
Fuel tank	30.3 gal (114.7 L)
Bore/Stroke	3.90x4.33 inches (99 x 110 mm)
Description	FPT / wastegate turbocharged and aftercooled / 4-cylinder / liquid-cooled
Displacement	207 ci (3.4 L)
Emission control	selective catalytic reduction with cooled exhaust-gas recirculation (SCR)
Emissions	Tier 4
Fuel system	high pressure common rail electronic direct injection
Power (gross)	99 hp (73.8 kW)
Starter	electric
Starter volts	12
Drawbar (tested)	66 hp (49.2 kW)
Engine (gross)	99 hp (73.8 kW)
PTO (claimed)	85 hp (63.4 kW)
PTO (tested)	85.8 hp (64.0 kW)

Transmission

Description	Four synchronized gears in three non-synchronized ranges with mechanical shuttle shift. / Four synchronized gears in three non-synchronized ranges with power shuttle shift. / Four synchronized gears in three non-synchronized ranges with power shuttle shift and two-speed high-low shift.
Gears	12 forward and reverse / 12 forward and reverse / 24 forward and reverse
Type	mechanical shuttle / power shuttle
Transmission type	12-speed mechanical shuttle / 12-speed power shuttle / 24-speed
Transmission type	12-speed mechanical shuttle / 12-speed power shuttle / 24-speed

Mechanical

Cab	Two-post ROPS. Cab optional with air-conditioning.
Description	Power steering / Wet disc brakes
Drive type	Two- or four-wheel drive
Final drives	inboard planetary

Hydraulics

Pump flow	16..9 gpm (60.6 lpm)
Type	open center
Valves	2 or 3

Hitch

Control	top link draft sensing
Drawbar	swinging extendable drawbar
Rear Arms	telescopic link ends
Rear lift (at 24"/610mm)	4339 lbs (1968 kg)
Rear Type	II/I

PTO

Rear PTO	independent
Rear PTO Type	540

Electrical

Battery volts	12
Charging system	alternator
Ground	negative

Dimensions & Tires

2WD Standard tires (ag)	Front: 7.50x16. Rear: 16.9R30
4WD Standard tires (ag)	Front: 11.2R24. Rear: 16.9R30 / Front: 14.9R24. Rear: 18.4R34
2WD Length	163.1 inches (414 cm)
2WD Wheelbase	92.2 inches (234 cm)
4WD Length	160.1 inches (406 cm)
4WD Wheelbase	90 inches (228 cm)
Description	Flange rear axle
Height (cab)	102.1 inches (259 cm)
Height (ROPS)	106.5 inches (270 cm)
Width	75.7 inches (192 cm)
2WD Rear tire	16.9R30
2WD Wheelbase	92.2 inches (234 cm)
4WD Wheelbase	90 inches (228 cm)
Front tire	7.50x16
Weight	6989 to 8157 pounds

CaseIH Farmall 100C Weight

2WD Cab	7474 lbs (3390 kg)
2WD ROPS	6989 lbs (3170 kg)
4WD Cab	8157 lbs (3700 kg)
4WD ROPS	7672 lbs (3480 kg)

CaseIH Farmall 100C attachments

Description	front-end loader

OCED Tractor Test 3004

Description	Diesel 12-speed 4WDApril 2016 - 2016, Link: OCED Tractor Test 3004 file / PTO performance / Drawbar performance / Gear 4M used for power test. / Gear 2M used for pull test.
Fuel use	4.8 gal/hour (18.2 l/hour) / 5.2 gal/hour (19.7 l/hour) / 4.9 gal/hour (18.5 l/hour) / 4.7 gal/hour (17.8 l/hour)
Max power	85.8 hp (64.0 kW) / 66 hp (49.2 kW)
Max pull	6830 lbs (3098 kg)
Power at rated engine speed	79.3 hp (59.1 kW)
Power at rated PTO speed	85.3 hp (63.6 kW)

References

Description	Farmall C Series Tractor Specifications published in 2015, by CaseIH / Farmall Utility Series Tractors published in 2021, by CaseIH

Variants

PowerStar 100	similar New Holland model

Nebraska Tractor Test Results

Test #S1133

Download PDF

Test Date: April, 2016

Location: Alma Mater Studiorum, University Di Bologna, Via Gandolfi, 19-40057, Cadriano, Bologna, Italy

This section is compiled from original Nebraska Tractor Test PDFs using AI-assisted extraction and human review. For full verification, download the source PDF above. Differences between reports, incomplete source data, and occasional extraction or data entry mistakes can occur.

PTO Drawbar Hydraulics Technical Sound Tires & Weight

Maximum Power & Fuel Consumption

Max Power (1 Hour)

85.80 hp

@ 1889 rpm

Rated Engine Speed

79.30 hp

N/A lb/hp·hr

Standard PTO Speed

85.30 hp

@ 540 rpm PTO

Torque Statistics

Maximum Torque	283 lb-ft (384 Nm)
Torque Rise	55.9%

PTO Power Curve

Maximum Power & Fuel Consumption Details

Condition	HP	kW	RPM	PTO RPM	Fuel gal/hr	DEF gal/hr
Rated Engine Speed	79.30	59.10	2291	632	5.16	0.17
Standard PTO Speed (1000 rpm)	85.30	63.60	1958	540	4.86	0.11
Maximum Power (1 Hour)	85.80	64.00	1889		4.81	0.11

Varying Power & Fuel Consumption

Click column headers to sort

Power	RPM	gal/hr	lb/hp·hr	hp·hr/gal	DEF gal/hr
79.30	2291	5.16	0.46	15.33	0.17
68.10	2320	4.73	0.49	14.42	0.16
51.60	2342	3.95	0.54	13.05	0.12
34.70	2364	3.20	0.64	10.87	0.10
17.50	2385	2.50	1.00	7.02	0.07
N/A	2407	1.84	N/A	N/A	0.05

Fuel Consumption Characteristics

Click column headers to sort

Condition	Power	kW	Pull (lbs)	Pull (kN)	Speed	km/h	Slip	inHg	kPa
Power at Rated Engine Speed - 8th (4M) G...	66.00	49.20	4,015	18	6.16	9.92	5.60	30.10	101.80
75% of Pull at Rated Engine Speed - 8th ...	50.60	37.70	3,015	13	6.29	10.13	4.50	30.10	101.80
50% of Pull at Rated Engine Speed - 8th ...	34.80	25.90	2,010	9	6.49	10.44	2.80	30.10	101.80
75% of Pull at Reduced Engine Speed - 9t...	50.60	37.70	3,015	13	6.29	10.13	4.30	30.10	101.80
50% of Pull at Reduced Engine Speed - 9t...	34.80	25.90	2,010	9	6.49	10.44	2.90	30.10	101.80

Unballasted Front Drive Engaged Maximum Power In Selected Gears

Click column headers to sort

Gear	Power	kW	Pull (lbs)	Pull (kN)	Speed	km/h	Slip	DEF lb/hp	inHg	Def Kg Kwh	Engine RPM	Fuel Hp Hr Gal	Fuel Kg Kwh	Fuel Kwh L	Fuel Lb Hp Hr	Temp Air Dry F	Temp Cooling F
6th (2M) Gear	50.70	37.80	6,830	30.39	2.78	4.48	15.00	0.03	30.10	0.02	2339	12.28	0.35	2.42	0.57	79	208
7th (3M) Gear	55.10	41.10	6,010	26.73	3.44	5.54	11.00	0.03	30.10	0.02	1886	11.57	0.37	2.28	0.60	77	207
8th (4M) Gear	70.50	52.60	5,365	23.86	4.93	7.93	8.40	0.02	30.10	0.01	1888	14.72	0.29	2.90	0.48	77	207
9th (1H) Gear	73.10	54.50	4,405	19.59	6.22	10.01	6.00	0.02	30.10	0.01	1881	15.21	0.28	3.00	0.46	77	208
10th (2H) Gear	72.80	54.30	2,790	12.42	9.78	15.73	3.70	0.02	30.10	0.01	1884	15.21	0.28	3.00	0.46	77	207

Engine

Make	F.P.T Industrial Diesel
Type	Four cylinder vertical with turbocharger, air to air intercooler and D.E.F.
Displacement	207 cu in (3387 ml)
Compression Ratio	17.0 to 1
Rated Engine Speed	2300 rpm
Air Cleaner	two paper elements
Exhaust	DOC (diesel oxidation catalyst) and SCR (selective catalyst reduction) integrated within a vertical muffler
Crankshaft	lengthwise

Chassis

Type	front wheel assist
Steering	hydrostatic
Transmission	selective gear fixed ratio
Wheelbase	90.00 in (2285 mm)
Front Tread Width	48.6 to 76.7 in
Rear Tread Width	52.6 to 76.3 in
Brakes	single wet disc operated by two foot pedals which can be locked together
Hydraulic Control	direct engine drive
Unladen Tractor Mass	8,225 lbs ( 3,730 kg )

Consumables

Fuel	No. 2 Diesel
DEF Fluid	N/A

Tires & Tracks

Rear Tires	**, 460/85R34
Front Tires	**, 380/85R24
Height of Drawbar	18.10 in (460 mm)

Static Weight

Rear	5,040 lbs
Front	3,350 lbs
Total	8,390 lbs

CaseIH Farmall 100C Specs ( 2015-Present )

Overview

Ideal Applications

Production

Engine

Transmission

Mechanical

Hydraulics

Hitch

PTO

Electrical

Dimensions & Tires

CaseIH Farmall 100C Weight

CaseIH Farmall 100C attachments

OCED Tractor Test 3004

References

Variants

Nebraska Tractor Test Results

PTO Performance

Maximum Power & Fuel Consumption

Torque Statistics

PTO Power Curve

Maximum Power & Fuel Consumption Details

Varying Power & Fuel Consumption

Drawbar Performance

Fuel Consumption Characteristics

Unballasted Front Drive Engaged Maximum Power In Selected Gears

Hydraulic Performance

Technical Specifications

Engine

Chassis

Consumables

Sound Levels

Sound Levels

At No Load In 7th Gear

Tires & Weight

Tires & Tracks

Static Weight

Test Remarks