Home / CaseIH / CX80

CaseIH CX80 Specs ( 1998-2002 )

Compare Tractor

Overview

The CaseIH CX80 is a farm utility tractor produced in Doncaster, England, between 1998 and 2002. It is powered by a Perkins 4.0L four-cylinder turbocharged diesel engine and features an open center hydraulic system with a total flow of 24.2 gpm. The tractor was available with multiple transmission options, including an 8-speed synchro shuttle and a 16-speed partial power shift.

Ideal Applications

Tested Performance and Power: According to Nebraska Tractor Test data, the CX80 achieved a maximum tested PTO output of 73.0 hp and a maximum drawbar pull of 9,530 lbs.
Transmission and Mechanical Configuration: The tractor is equipped with hydrostatic power steering and offers transmission layouts ranging from an 8-speed synchro shuttle to a 24-speed creeper system.
Hitch and Hydraulic Specifications: This model features a Category II/I rear hitch with electronic upper link control and a rear lift capacity of 3,665 lbs, supported by a 2500 psi hydraulic system.

Production

Description Utility tractor / Built in Doncaster, England
Manufacturer CaseIH
Original price $30,000 (1999)

Engine

Engine type Perkins 4.0L 4-cyl diesel
Air cleaner dual paper elements
Bore/Stroke 3.93x5.00 inches (100 x 127 mm)
Compression 17.25:1
Coolant capacity 16.9 qts (16.0 L)
Description Perkins 1004.40T / turbocharged diesel / 4-cylinder / liquid-cooled
Displacement 243.5 ci (4.0 L)
Fuel system mechanical direct injection with 5-hole injectors
Oil capacity 9.3 qts (8.8 L)
Oil change 250 h
Power (gross) 84 hp (62.6 kW)
Power (net) 78 hp (58.2 kW)
Rated RPM 2200
Starter volts 12
Torque 253 lb-ft (343.1 Nm)
Torque RPM 1400
Drawbar (tested) 59.3 hp (44.2 kW)
Engine (gross) 84 hp (62.6 kW)
Engine (net) 78 hp (58.2 kW)
PTO (claimed) 67 hp (50.0 kW)
PTO (tested) 71.3 hp (53.2 kW)

Transmission

Clutch 12-inch dry disc / 12-inch dry disc
Description Four gears (1-4) in two ranges (low/high) with left-hand shuttle lever. / Four gears (1-4) in two ranges (low/high) with push-button power shift on the gear shift lever. Left-hand shuttle lever on the steering column.
Gears 8 forward and reverse / 16 forward and 8 reverse / 24 forward and 12 reverse
Oil capacity 36.4 qts (2WD) (34.4 L) / 36.4 qts (2WD) (34.4 L)
Type synchro shuttle / partial power shift / creeper
Transmission type 8-speed synchro shuttle / 16-speed partial power shift / 24-speed creeper
Transmission type 8-speed synchro shuttle / 16-speed partial power shift / 24-speed creeper

Mechanical

Description Differential hydraulic wet disc brakes / Two-post ROPS with flat platform. Optional cab with air-conditioning.
Differential lock electro-hydraulic
Drive 4x2 2WD
Steering hydrostatic power

Capacity

Fuel 42 gal (159.0 L)
Hydraulic system 9.1 gal (2WD) (34.4 L)

Hydraulics

Capacity 9.1 gal (2WD) (34.4 L)
Pressure 2500 psi (172.4 bar)
Pump flow 15.7 gpm (59.4 lpm)
Total flow 24.2 gpm (total) (91.6 lpm)
Type open center
Valves 0 to 3

Hitch

Control electronic upper link
Rear lift 3,665 lbs (1662 kg)
Rear Type II/I

PTO

Clutch hydraulic wet disc
Rear PTO independent
Rear PTO Type 540

Electrical

Battery CCA 650
Battery volts 12
Charging amps 65
Charging system alternator
Ground negative

Dimensions & Tires

Ag front 7.50-16
Ag rear 16.9-30
Wheelbase 89.1 inches (2WD) (226 cm)
Front tire 7.50-16
Rear tire 16.9-30
Weight 7396 to 8466 pounds
Wheelbase 89.1 inches (2WD) (226 cm)

CX80 Serial Numbers

1998 JJE1000056
1999 JJE1008492
2000 JJE1013490
2001 JJE1017672
2002 JJE1019985
Description FAQ: How to read a serial number table.
Location: Near the tractor steering column on right side.

CaseIH CX80 Weight

Max capacity 10,150 lbs (4604 kg)
Operating 8,135 lbs (3690 kg)
Shipping 7,396 lbs (2WD) (3354 kg)

CaseIH CX80 attachments

Description front-end loader

OCED Tractor Test 1896

Description Diesel 16-speed 4WDOctober 1998 - 1998, Link: OCED Tractor Test 1896 file / PTO performance / Drawbar performance / Gear 1-High-TA used for power test. / Gear 1-Low-Direct used for pull test.
Fuel use 4.7 gal/hour (17.8 l/hour) / 4.5 gal/hour (17.0 l/hour) / 4.7 gal/hour (17.8 l/hour)
Max power 59.3 hp (44.2 kW)
Max pull 9,530 lbs (4322 kg)
Power at rated engine speed 71.3 hp (53.2 kW)
Power at rated PTO speed 73.0 hp (54.4 kW)

References

Description CX Series Tractors published in 1997, by CaseIH

Variants

C80 basic model
CX80 deluxe model

Nebraska Tractor Test Results

Test #327
Download PDF
Test Date: October, 1998
Location: DLG Testing Station for Agricultural Machinery Max - Eyth - Weg 1, D-64823 Gros-Umstadt, Germany

This section is compiled from original Nebraska Tractor Test PDFs using AI-assisted extraction and human review. For full verification, download the source PDF above. Differences between reports, incomplete source data, and occasional extraction or data entry mistakes can occur.

Maximum Power & Fuel Consumption

Rated Engine Speed
71.30 hp
N/A lb/hp·hr
Standard PTO Speed
73.00 hp
@ 1000 rpm PTO

Torque Statistics

Maximum Torque 225 lb.-ft. (305 Nm) at 1406 rpm
Torque Rise 0.32%

PTO Power Curve

82 62 41 21 0 0 hp @ 2349 rpm 0 2349 71 hp @ 2200 rpm 71 2200 63 hp @ 2280 rpm 63 2280 48 hp @ 2300 rpm 48 2300 32 hp @ 2314 rpm 32 2314 16 hp @ 2334 rpm 16 2334 MAX: 71.3 HP ENGINE RPM POWER (HP)

Maximum Power & Fuel Consumption Details

Condition HP kW RPM PTO RPM Fuel gal/hr Fuel L/hr
Rated Engine Speed 71.30 53.20 2200 4.70 17.79
Standard PTO Speed (1000 rpm) 73.00 54.40 2000 1000 4.46 16.89

Varying Power & Fuel Consumption

Click column headers to sort

Power RPM gal/hr lb/hp·hr hp·hr/gal DEF gal/hr
71.30 2200 4.70 0.46 N/A N/A
62.90 2280 4.47 0.50 N/A N/A
47.50 2300 3.83 0.57 N/A N/A
31.90 2314 3.15 0.69 N/A N/A
16.10 2334 2.40 1.05 N/A N/A
N/A 2349 1.56 N/A N/A N/A