Home / CaseIH / CX50

CaseIH CX50 Specs ( 1998-2002 )

Compare Tractor

Overview

The CaseIH CX50 is a utility tractor manufactured in Doncaster, England, between 1998 and 2002. It features a Perkins 2.7L three-cylinder diesel engine and was available in multiple transmission configurations including synchro shuttle and partial power shift. Measured performance from OCED Tractor Test 1893 recorded a maximum PTO output of 42.5 horsepower and a maximum drawbar pull of 7,990 pounds.

Ideal Applications

Tested Power and Pull Performance: According to Nebraska Tractor Test 1893, the CX50 achieved a tested maximum PTO power of 42.5 hp and a maximum drawbar pull of 7,990 lbs.
Transmission and Drive Configuration: The tractor was offered with 8-speed synchro shuttle, 16-speed partial power shift, or 24-speed creeper transmissions, all featuring a left-hand shuttle lever.
Hydraulic and Hitch Specifications: This model is equipped with an open center hydraulic system providing 22.2 gpm of total flow and a Category II/I rear hitch with a 3,665-pound lift capacity.

Production

Description Utility tractor / Built in Doncaster, England
Manufacturer CaseIH
Original price $24,000 (1999)

Engine

Engine type Perkins 2.7L 3-cyl diesel
Air cleaner dual paper elements
Bore/Stroke 3.74x5.00 inches (95 x 127 mm)
Compression 17.25:1
Coolant capacity 12.57 qts (11.9 L)
Description Perkins 903.27 / diesel / 3-cylinder / liquid-cooled
Displacement 165 ci (2.7 L)
Fuel system mechanical direct injection with 5-hole injectors
Oil capacity 8 qts (7.6 L)
Oil change 250 h
Power (gross) 53 hp (39.5 kW)
Power (net) 48 hp (35.8 kW)
Rated RPM 2250
Starter volts 12
Torque 140 lb-ft (189.8 Nm)
Torque RPM 1200
Drawbar (tested) 35.4 hp (26.4 kW)
Engine (gross) 53 hp (39.5 kW)
Engine (net) 48 hp (35.8 kW)
PTO (claimed) 40 hp (29.8 kW)
PTO (tested) 42.5 hp (31.7 kW)

Transmission

Clutch 12-inch dry disc / 12-inch dry disc
Description Four gears (1-4) in two ranges (low/high) with left-hand shuttle lever. / Four gears (1-4) in two ranges (low/high) with push-button power shift on the gear shift lever. Left-hand shuttle lever on the steering column.
Gears 8 forward and reverse / 16 forward and 8 reverse / 24 forward and 12 reverse
Oil capacity 36.4 qts (2WD) (34.4 L) / 36.4 qts (2WD) (34.4 L)
Type synchro shuttle / partial power shift / creeper
Transmission type 8-speed synchro shuttle / 16-speed partial power shift / 24-speed creeper
Transmission type 8-speed synchro shuttle / 16-speed partial power shift / 24-speed creeper

Mechanical

Description Differential hydraulic wet disc brakes / Two-post ROPS with flat platform. Optional cab with air-conditioning.
Differential lock electro-hydraulic
Drive 4x2 2WD
Steering hydrostatic power

Capacity

Fuel 42 gal (159.0 L)
Hydraulic system 9.1 gal (2WD) (34.4 L)

Hydraulics

Capacity 9.1 gal (2WD) (34.4 L)
Pressure 2500 psi (172.4 bar)
Pump flow 13.7 gpm (51.9 lpm)
Total flow 22.2 gpm (total) (84.0 lpm)
Type open center
Valves 0 to 3

Hitch

Control electronic upper link
Rear lift 3,665 lbs (1662 kg)
Rear Type II/I

PTO

Clutch hydraulic wet disc
Rear PTO independent
Rear PTO Type 540

Electrical

Battery CCA 650
Battery volts 12
Charging amps 65
Charging system alternator
Ground negative

Dimensions & Tires

Ag front 7.50-16
Ag rear 14.9-28
Wheelbase 84.8 inches (2WD) (215 cm)
Front tire 7.50-16
Rear tire 14.9-28
Weight 7286 to 7970 pounds
Wheelbase 84.8 inches (2WD) (215 cm)

CX50 Serial Numbers

1998 JJE1000056
1999 JJE1008492
2000 JJE1013490
2001 JJE1017672
2002 JJE1019985
Description FAQ: How to read a serial number table.
Location: Near the tractor steering column on right side.

CaseIH CX50 Weight

Max capacity 10,150 lbs (4604 kg)
Shipping 7,286 lbs (2WD) (3304 kg)

OCED Tractor Test 1893

Description Diesel 16-speed 4WDApril 1999 - June 1999, Link: OCED Tractor Test 1893 file / PTO performance / Drawbar performance / Gear 1-High-TA used for power test. / Gear 1-Low-Direct used for pull test.
Fuel use 2.8 gal/hour (10.6 l/hour) / 2.6 gal/hour (9.8 l/hour) / 2.8 gal/hour (10.6 l/hour)
Max power 35.4 hp (26.4 kW)
Max pull 7,990 lbs (3624 kg)
Power at rated engine speed 42.5 hp (31.7 kW)
Power at rated PTO speed 40.9 hp (30.5 kW)

References

Description CX Series Tractors published in 1997, by CaseIH

Variants

C50 basic model
CX50 deluxe model

Nebraska Tractor Test Results

Test #324
Download PDF
Test Date: April - June, 1999
Location: DLG Testing Station for Agricultural Machinery Max - Eyth - Weg 1, D-64823 Gros-Umstadt, Germany

This section is compiled from original Nebraska Tractor Test PDFs using AI-assisted extraction and human review. For full verification, download the source PDF above. Differences between reports, incomplete source data, and occasional extraction or data entry mistakes can occur.

Maximum Power & Fuel Consumption

Rated Engine Speed
42.50 hp
N/A lb/hp·hr
Standard PTO Speed
40.90 hp
@ 540 rpm PTO

Torque Statistics

Maximum Torque 121 lb-ft (164 Nm) at 1200 rpm
Torque Rise 21.4%

PTO Power Curve

49 37 25 12 0 0 hp @ 2403 rpm 0 2403 43 hp @ 2248 rpm 43 2248 37 hp @ 2311 rpm 37 2311 28 hp @ 2348 rpm 28 2348 19 hp @ 2363 rpm 19 2363 10 hp @ 2389 rpm 10 2389 MAX: 42.5 HP ENGINE RPM POWER (HP)

Maximum Power & Fuel Consumption Details

Condition HP kW RPM PTO RPM
Rated Engine Speed 42.50 31.70 2248 605
Standard PTO Speed (1000 rpm) 40.90 30.50 2006 540

Varying Power & Fuel Consumption

Click column headers to sort

Power RPM gal/hr lb/hp·hr hp·hr/gal DEF gal/hr
42.50 2248 2.80 0.46 15.20 N/A
37.00 2311 2.50 0.47 14.81 N/A
28.20 2348 2.08 0.51 13.57 N/A
18.90 2363 1.69 0.62 11.19 N/A
9.50 2389 1.20 0.87 7.94 N/A
N/A 2403 0.85 N/A N/A N/A