Overview
The CaseIH C80 is a utility tractor produced between 1998 and 2002 in Doncaster, England, featuring a 4.0L 4-cylinder Perkins turbocharged diesel engine. It is equipped with a 4x2 2WD drive system, hydrostatic power steering, and a rear lift capacity of 3,665 lbs on a Category II/I hitch. The tractor provides multiple transmission options including 8-speed or 16-speed partial power shift and creeper configurations.
Ideal Applications
Engine Performance Specifications:
The Perkins 1004.40T engine is rated at 84 gross horsepower and 253 lb-ft of torque, with OCED testing recording 71.3 horsepower at the PTO.
Tested Drawbar and Pulling Power:
According to OCED Tractor Test 1896, the C80 achieved a maximum pull of 9,530 lbs and recorded a fuel consumption rate of 4.7 gallons per hour at maximum power.
Hydraulic and Mechanical Configuration:
This model features an open center hydraulic system with a pump flow of 12.7 gpm and a 540 RPM independent rear PTO controlled by a hydraulic wet disc clutch.
Production
| Description | Utility tractor / Built in Doncaster, England |
|---|---|
| Manufacturer | CaseIH |
| Original price | $26,000 (1999) |
Engine
| Engine type | Perkins 4.0L 4-cyl diesel |
|---|---|
| Air cleaner | dual paper elements |
| Bore/Stroke | 3.93x5.00 inches (100 x 127 mm) |
| Compression | 17.25:1 |
| Coolant capacity | 16.9 qts (16.0 L) |
| Description | Perkins 1004.40T / turbocharged diesel / 4-cylinder / liquid-cooled |
| Displacement | 243.5 ci (4.0 L) |
| Fuel system | mechanical direct injection with 5-hole injectors |
| Oil capacity | 9.3 qts (8.8 L) |
| Oil change | 250 h |
| Power (gross) | 84 hp (62.6 kW) |
| Power (net) | 78 hp (58.2 kW) |
| Rated RPM | 2200 |
| Starter volts | 12 |
| Torque | 253 lb-ft (343.1 Nm) |
| Torque RPM | 1400 |
| Drawbar (tested) | 59.3 hp (44.2 kW) |
| Engine (gross) | 84 hp (62.6 kW) |
| Engine (net) | 78 hp (58.2 kW) |
| PTO (claimed) | 67 hp (50.0 kW) |
| PTO (tested) | 71.3 hp (53.2 kW) |
Transmission
| Clutch | 12-inch dry disc / 12-inch dry disc |
|---|---|
| Gears | 8 forward and 4 reverse / 16 forward and 8 reverse / 8 forward and reverse / 16 forward and 8 reverse |
| Oil capacity | 36 qts (2WD) (34.1 L) / 36 qts (2WD) (34.1 L) / 36 qts (2WD) (34.1 L) |
| Type | partial power shift / creeper |
| Transmission type | 8-speed / 16-speed partial power shift / 16-speed creeper |
| Transmission type | 8-speed / 16-speed partial power shift / 16-speed creeper |
Mechanical
| Description | Differential hydraulic wet disc brakes / Two-post ROPS with straddle platform. |
|---|---|
| Differential lock | mechanical |
| Drive | 4x2 2WD |
| Steering | hydrostatic power |
Capacity
| Fuel | 20 gal (75.7 L) |
|---|---|
| Hydraulic system | 9 gal (2WD) (34.1 L) |
Hydraulics
| Capacity | 9 gal (2WD) (34.1 L) |
|---|---|
| Pressure | 2500 psi (172.4 bar) |
| Pump flow | 12.7 gpm (48.1 lpm) |
| Total flow | 15.7 gpm (59.4 lpm) |
| Type | open center |
| Valves | 0 to 3 |
Hitch
| Control | mechanical |
|---|---|
| Rear lift | 3,665 lbs (1662 kg) |
| Rear Type | II/I |
PTO
| Clutch | hydraulic wet disc |
|---|---|
| Rear PTO | independent |
| Rear PTO Type | 540 |
Electrical
| Battery CCA | 650 |
|---|---|
| Battery volts | 12 |
| Charging amps | 65 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Ag front | 7.50-16 |
|---|---|
| Ag rear | 16.9-30 |
| Wheelbase | 84.3 inches (2WD) (214 cm) |
| Front tire | 7.50-16 |
| Rear tire | 16.9-30 |
| Weight | 5941 to 8135 pounds |
| Wheelbase | 84.3 inches (2WD) (214 cm) |
C80 Serial Numbers
| 1998 | JJE1000056 |
|---|---|
| 1999 | JJE1008492 |
| 2000 | JJE1013490 |
| 2001 | JJE1017672 |
| 2002 | JJE1019985 |
| Description | FAQ: How to read a serial number table. |
| Location: | Near the tractor steering column on right side. |
CaseIH C80 Weight
| Max capacity | 10,150 lbs (4604 kg) |
|---|---|
| Operating | 8,135 lbs (3690 kg) |
| Shipping | 5,941 lbs (2WD) (2694 kg) |
OCED Tractor Test 1896
| Description | Diesel 16-speed 4WDOctober 1998 - 1998, Link: OCED Tractor Test 1896 file / PTO performance / Drawbar performance / Gear 1-High-TA used for power test. / Gear 1-Low-Direct used for pull test. |
|---|---|
| Fuel use | 4.7 gal/hour (17.8 l/hour) / 4.5 gal/hour (17.0 l/hour) / 4.7 gal/hour (17.8 l/hour) |
| Max power | 59.3 hp (44.2 kW) |
| Max pull | 9,530 lbs (4322 kg) |
| Power at rated engine speed | 71.3 hp (53.2 kW) |
| Power at rated PTO speed | 73.0 hp (54.4 kW) |
References
| Description | CX Series Tractors published in 1997, by CaseIH |
|---|
Variants
| C80 | basic model |
|---|---|
| CX80 | deluxe model |