Overview
The CaseIH 9250 is a four-wheel drive farm tractor produced between 1990 and 1995 in Fargo, North Dakota, featuring an articulated steering design and a 10.0L 6-cylinder Cummins diesel engine. This model is equipped with a 12-speed full power shift transmission and was tested at a maximum PTO output of 271.01 hp and a maximum drawbar pull of 32,363 lbs. The tractor's configuration includes a 30,060 lb operating weight and an optional Type III rear hitch with a 12,750 lb lift capacity.
Ideal Applications
Engine and PTO Output:
The 10.0L Cummins turbocharged aftercooled diesel engine is rated at 300 hp and achieved a tested PTO power of 271.01 hp at 2098 engine RPM.
Transmission and Drive System:
This model features a 12-speed full power shift transmission with a skip-shift feature and an articulated 4WD steering system with a 131-inch wheelbase.
Tested Drawbar Performance:
OCED Tractor Test 1651 recorded a maximum drawbar pull of 32,363 lbs and a tested drawbar power of 237.29 hp for this 30,060 lb tractor.
Production
| Description | Built in Fargo, North Dakota, USA / Original price was $116,000 in 1995 |
|---|---|
| Drive type | Four-wheel Drive (4WD) tractor |
| Manufacturer | CaseIH |
Engine
| Engine type | Cummins 10.0L 6-cyl diesel |
|---|---|
| Air cleaner | dual paper elements |
| Bore/Stroke | 4.921x5.354 inches (125 x 136 mm) |
| Compression | 16.0:1 |
| Coolant capacity | 54 qts (51.1 L) |
| Description | Cummins LTA-10 / turbocharged aftercooled diesel / 6-cylinder / liquid-cooled |
| Displacement | 611 ci (10.0 L) |
| Oil capacity | 44 qts (41.6 L) |
| Power | 300 hp (223.7 kW) |
| Rated RPM | 2100 |
| Starter volts | 12 |
| Torque | 1015 lb-ft (1376.3 Nm) |
| Torque RPM | 1400 |
| Drawbar (tested) | 237.29 hp (176.9 kW) |
| PTO (claimed) | 266 hp (198.4 kW) |
| PTO (tested) | 271.01 hp (202.1 kW) |
Transmission
| Clutch | hydraulic wet disc |
|---|---|
| Description | Full power shift transmission operated with two right-hand levers; one for shifting gears and the other for forward/reverse. Skip-Shift feature allows the transmission to quickly shift from first into higher gears (4th, 6th, 8th). |
| Gears | 12 forward and 3 reverse |
| Transmission type | 12-speed full power shift |
| Type | full power shift |
Mechanical
| Cab | Cab standard with air-conditioning. Optional deluxe cab adds side and rear window wipers plus internal storage compartments. |
|---|---|
| Description | Integrated hydraulic caliper disc brakes |
| Drive type | Four-wheel drive |
| Steering | hydrostatic power with articulation and front-axle steering |
Capacity
| Fuel | 200 gal (757.0 L) |
|---|---|
| Hydraulic system | 18 gal (68.1 L) |
Hydraulics
| Capacity | 18 gal (68.1 L) |
|---|---|
| Pressure | 2500 psi (172.4 bar) |
| Total flow | 27 gpm (102.2 lpm) |
| Type | closed center |
| Valves | 4 |
Hitch
| Control | draft control optional |
|---|---|
| Rear lift | 12750 lbs (5783 kg) |
| Rear Type | III OptOptional |
PTO
| Engine RPM | 1000@2098 |
|---|---|
| Rear PTO | independent OptOptional |
| Rear PTO Type | 1000 |
Electrical
| Battery volts | 12 |
|---|---|
| Ground | negative |
Dimensions & Tires
| Ag front | 20.8-38 |
|---|---|
| Ag rear | 20.8-38 |
| Front tread | 60 to 130 inches (152 to 330 cm) |
| Height (exhaust) | 143 inches (363 cm) |
| Length | 272.9 inches (693 cm) |
| Operating weight | 30,060 lbs (20.8R42 duals) (13635 kg) |
| Rear tread | 60 to 130 inches (152 to 330 cm) |
| Wheelbase | 131 inches (332 cm) |
| Width | 93.5 inches (minimum) (237 cm) |
| Front tire | 20.8-38 |
| Rear tire | 20.8-38 |
| Weight | 30,060 lbs (13635 kg) |
| Wheelbase | 131 inches (332 cm) |
9250 Serial Numbers
| 1990 | JCB0004600 |
|---|---|
| 1991 | JCB0026501 |
| 1992 | JCB0028400 |
| 1993 | JCB0030500 |
| 1994 | JEE0031773 |
| 1995 | JEE0032808 |
| Description | FAQ: How to read a serial number table. |
| Location: | Under the left-side steps on front fender |
OCED Tractor Test 1651
| Description | Diesel 12-speed 4WDSeptember 19 - 25, 1991Link: OCED Tractor Test 1651 file / PTO performance / Drawbar performance / Gear 5 used for power test. / Gear 1 used for pull test. |
|---|---|
| Fuel use | 14.3 gal/hour (54.1 l/hour) / 14.6 gal/hour (55.3 l/hour) / 14.5 gal/hour (54.9 l/hour) |
| Max power | 271.01 hp (202.1 kW) / 237.29 hp (176.9 kW) |
| Max pull | 32,363 lbs (14679 kg) |
| Power at rated engine speed | 266.01 hp (198.4 kW) |
References
| Description | 9200 Series 4WD published in 1993, by CaseIH |
|---|
Speeds
| Description | With 18.4x38 tires. |
|---|
Variants
| 9250 | articulated |
|---|---|
| 9260 | four-wheel steer |