Allis-Chalmers 210 Specs ( 1970-1973 )

Compare Tractor

Overview

The Allis-Chalmers 210 is a row-crop farm tractor manufactured in West Allis, Wisconsin, from 1970 to 1973 with a total production run of 1,471 units. It features a 7.0L six-cylinder turbocharged diesel engine paired with an 8-speed sliding gear transmission and an open operator station, though a QCS cab became optional in 1972. Nebraska Tractor Test 1065 verified the model's performance with a tested PTO output of 122.4 hp and a maximum drawbar pull of 14,023 lbs.

Ideal Applications

Tested Engine and PTO Performance: The 426 cubic inch turbocharged diesel engine produced 122.4 hp at the PTO during Nebraska Tractor Test 1065 while maintaining a fuel consumption rate of 8.0 gallons per hour.
Traction and Ballasted Weight Capacity: Listed with an operating weight of 12,425 lbs, the tractor's weight can be increased to a ballasted maximum of 18,045 lbs to support its tested 14,023 lbs of pull capacity.
Transmission and PTO Configuration: The mechanical system consists of an 8-speed sliding gear transmission with two ranges and an independent 1000 RPM rear PTO equipped with a hydraulic disc clutch.

Production

Description Row-Crop tractor / Built in West Allis, Wisconsin, USA
Manufacturer Allis Chalmers
Original price $11,642
Total built 1,471

Engine

Engine type Allis Chalmers 7.0L 6-cyl diesel
Fuel tank 51 gal (193.0 L)
Air cleaner dry
Bore/Stroke 4.25x5.00 inches (108 x 127 mm)
Compression 16:1
Coolant capacity 21 qts (19.9 L)
Description Allis Chalmers 3500 / turbocharged diesel / 6-cylinder / liquid-cooled inline
Displacement 426 ci (7.0 L)
Idle RPM 650-2400
Rated RPM 2200
Starter volts 12
Drawbar (tested) 104.95 hp (78.3 kW)
PTO (claimed) 122 hp (91.0 kW)
PTO (tested) 122.4 hp (91.3 kW)

Transmission

Clutch 355.6mm dry disc
Description Four gears (1-4) plus reverse (R) in two ranges (low/high).
Gears 8 forward and 2 reverse
Transmission type 8-speed sliding gear
Type sliding gear

Mechanical

Cab Open operator station. QCS cab optional starting in 1972.
Description Power steering / Disc brakes
Drive type Two-wheel drive

Hydraulics

Pump flow 21.5 gpm (81.4 lpm)
Type open center
Valves 2

Hitch

Rear Type II OptOptional

PTO

Clutch hydraulic disc
Rear PTO independent
Rear PTO Type 1000

Electrical

Batteries 2
Battery volts 12
Charging system alternator

Dimensions & Tires

Ag front 11.00-16 / 10.00-16
Ag rear 18.4-34 / 23.1-30
Ballasted weight 18045 lbs (8185 kg)
Bar rear axle 3.625 inch diameter (92 mm)
Clearance (front axle) 21.6 inches (54 cm)
Clearance (rear axle) 26 inches (66 cm)
Length 164 inches (416 cm)
Operating weight 12425 lbs (5635 kg)
Wheelbase 100 inches (254 cm)
Width 96 inches*Minimum width. (243 cm)
Front tire 11.00-16
Rear tire 18.4-34
Weight 12425 lbs (5635 kg)
Wheelbase 100 inches (254 cm)

210 Serial Numbers

1970 1004
1971 1107
1972 2082
Description FAQ: How to read a serial number table.
Final 2469
Location: Serial number stamped into the tractor's torque housing.

Allis Chalmers 210 Height

Exhaust 107 inches (271 cm)
Hood 70 inches (177 cm)
Steering wheel 84 inches (213 cm)

Nebraska Tractor Test 1065

Description Diesel 8-speed 2WDMay 3 - 13, 1971Link: Nebraska Tractor Test 1065 file / PTO performance / Drawbar performance / Gear 4L used for power test. / Gear 2L used for pull test.
Fuel use 8.0 gal/hour (30.3 l/hour) / 8.0 gal/hour (30.3 l/hour)
Max power 104.95 hp (78.3 kW)
Max pull 14023 lbs (6360 kg)
Power at rated engine speed 122.4 hp (91.3 kW)

References

Description Two-Ten Landhandler Tractor published in 1970, by Allis Chalmers / Two-Ten Landhandler Tractor published in 1972, by Allis Chalmers