Allis-Chalmers 200 Specs ( 1972-1975 )

Compare Tractor

Overview

The Allis-Chalmers 200 is a row-crop farm tractor manufactured between 1972 and 1975 with a total production run of 10,126 units. It is powered by a 4.9L 6-cylinder turbocharged diesel engine and features an 8-speed constant mesh-helical gear transmission. Performance testing recorded 93.64 PTO horsepower and 79.12 drawbar horsepower, supported by a 4,600-pound rear lift capacity.

Ideal Applications

Nebraska Test Performance: In Nebraska Tractor Test 887, the unit achieved a maximum drawbar pull of 8,917 lbs and a fuel consumption rate of 5.7 gallons per hour at maximum power.
Hydraulic System and Hitch Specifications: The tractor is equipped with an open center hydraulic system delivering a total flow of 21.02 gpm at 2300 psi to manage a Category II rear hitch.
Chassis and Drivetrain Configuration: The mechanical layout consists of a two-wheel drive system with power steering, ball actuated disc brakes, and a 105.75-inch wheelbase weighing 7,324 lbs.

Production

Description Row-Crop tractor
Manufacturer Allis Chalmers
Original price $14,125
Total built 10,126

Engine

Engine type Allis Chalmers 4.9L 6-cyl diesel
Bore/Stroke 3.875x4.25 inches (98 x 108 mm)
Compression 16.25:1
Coolant capacity 18 qts (17.0 L)
Description Allis Chalmers / turbocharged diesel / 6-cylinder / liquid-cooled
Displacement 301 ci (4.9 L)
Firing order 1-5-3-6-2-4
Oil capacity 15 qts (14.2 L)
Rated RPM 2200
Starter volts 12
Drawbar (tested) 79.12 hp (59.0 kW)
PTO (tested) 93.64 hp (69.8 kW)

Transmission

Gears 8 forward and 2 reverse
Oil capacity 38 qts (36.0 L)
Transmission type 8-speed constant mesh-helical gears
Type constant mesh-helical gears

Mechanical

Cab Open operator station. QCS cab optional starting in 1972.
Description Power steering / Ball actuated disc brakes
Drive type Two-wheel drive

Capacity

Fuel 48 gal (181.7 L)
Hydraulic system 7 gal (26.5 L)

Hydraulics

Capacity 7 gal (26.5 L)
Pressure 2300 psi (158.6 bar)
Pump flow 17.2 gpm (65.1 lpm)
Total flow 21.02 gpm (79.6 lpm)
Type open center
Valves 2

Hitch

Rear lift 4,600 lbs (2086 kg)
Rear Type II

PTO

Rear PTO transmission
Rear PTO Type 540

Electrical

Batteries 1
Battery volts 12
Charging amps 32
Charging system alternator
Ground negative

Dimensions & Tires

Ag front 7.50-16 / 10.00-16
Ag rear 16.9-34 / 23.1-30
Clearance (front axle) 25.3 inches (64 cm)
Clearance (rear axle) 27.1 inches (68 cm)
Length 175.5 inches (445 cm)
Rear axle 3.25 inch diameter (82 mm)
Weight 7,324 lbs (3322 kg)
Wheelbase 105.75 inches (268 cm)
Width 87.625 inches (222 cm)
Front tire 7.50-16
Rear tire 16.9-34
Weight 7,324 lbs (3322 kg)
Wheelbase 105.75 inches (268 cm)

200 Serial Numbers

1972 1001
1973 3344
1974 6294
1975 9250
Description FAQ: How to read a serial number table.
Location: Torque housing, right side

Allis Chalmers 200 Height

Exhaust 117.5 inches (298 cm)
Hood 65.8 inches (167 cm)
Steering wheel 89.5 inches (227 cm)

Allis Chalmers 200 attachments

Description front-end loader

Nebraska Tractor Test 887

Description Diesel 8-speed 2WDApril 10 - 16, 1965Link: Nebraska Tractor Test 887 file / PTO performance / Drawbar performance / Gear 4 used for power test. / Gear 3 used for pull test.
Fuel use 5.7 gal/hour (21.6 l/hour) / 5.3 gal/hour (20.1 l/hour) / 5.7 gal/hour (21.6 l/hour)
Max power 79.12 hp (59.0 kW)
Max pull 8,917 lbs (4044 kg)
Power at rated engine speed 93.64 hp (69.8 kW)
Power at rated PTO speed 89.71 hp (66.9 kW)

References

Description Loaders - picking up where the others leave off published in 1979, by Allis Chalmers / 200 Tractor published in 1965, by Allis Chalmers

Speeds

Description With 18.4-38 rear tires.