Overview
The AGCO DT160 is a row-crop tractor produced in Beauvais, France, from 2002 to 2004. It is equipped with a 505 ci Cummins 8.3L turbocharged diesel engine and an 18-speed full power shift transmission with four-wheel drive. Notable configurations include a closed center pressure flow compensated hydraulic system and a rear lift capacity of 16,000 lbs.
Ideal Applications
Tested Drawbar and PTO Performance:
According to OECD Test 1781, the tractor produced a maximum drawbar pull of 20,868 lbs and achieved a tested PTO power of 164.38 hp at rated engine speed.
Transmission and Drive Configuration:
The mechanical layout includes an 18-speed full power shift transmission with an electro-hydraulic wet disc clutch, providing 18 forward and 6 reverse gears.
Hydraulic and Hitch Specifications:
This model features a closed center PFC hydraulic system with a pump flow of 29 gpm at 2900 psi, supporting a type 3/3N rear hitch.
Production
| Description | Row-Crop tractor / Built in Beauvais, France |
|---|---|
| Manufacturer | AGCO |
Engine
| Engine type | Cummins 8.3L 6-cyl diesel |
|---|---|
| Fuel tank | 120 gal (454.2 L) |
| Air cleaner | two paper elements |
| Bore/Stroke | 4.488x5.315 inches (114 x 135 mm) |
| Compression | 17.3:1 |
| Description | Cummins C8.3L / turbocharged diesel / 6-cylinder / liquid-cooled |
| Displacement | 505 ci (8.3 L) |
| Rated RPM | 2200 |
| Starter volts | 12 |
| Torque | 538 lb-ft (729.5 Nm) |
| Torque RPM | 1251 |
| Drawbar (tested) | 142.58 hp (106.3 kW) |
| PTO (claimed) | 160 hp (119.3 kW) |
| PTO (tested) | 164.38 hp (122.6 kW) |
Transmission
| Clutch | electro-hydraulic wet disc |
|---|---|
| Gears | 18 forward and 6 reverse |
| Transmission type | 18-speed full power shift |
| Type | full power shift |
Mechanical
| Cab | Cab standard. |
|---|---|
| Description | Power steering / Hydraulic wet disc brakes |
| Drive type | Four-wheel drive |
Hydraulics
| Pressure | 2900 psi (200.0 bar) |
|---|---|
| Pump flow | 29 gpm (109.8 lpm) |
| Type | closed center pressure flow compensated (PFC) |
| Valves | 4 |
Hitch
| Rear lift (at 24"/610mm) | 16,000 lbs (7257 kg) |
|---|---|
| Rear Type | 3/3N |
PTO
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 540/1000 |
Electrical
| Battery volts | 12 |
|---|---|
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Height | 121 inches (307 cm) |
|---|---|
| Length | 203 inches (515 cm) |
| Shipping weight | 18,500 lbs (8391 kg) |
| Wheelbase | 121 inches (307 cm) |
| Width | 98.2 inches*Minimum width. (249 cm) |
| Weight | 18,500 lbs (8391 kg) |
| Wheelbase | 121 inches (307 cm) |
AGCO DT160 attachments
| Description | front-end loader |
|---|
DT160 Serial Numbers
| 2002 | L001001 |
|---|---|
| 2003 | M001001 |
| 2004 | N001001 |
| Description | FAQ: How to read a serial number table. |
OCED Tractor Test 1781
| Description | Diesel 18-speed 4WDSeptember 7 - 27, 2000Link: OCED Tractor Test 1781 file / PTO performance / Drawbar performance / Gear 10 used for power test. / Gear 3 used for pull test. |
|---|---|
| Fuel use | 10.7 gal/hour (40.5 l/hour) / 10.5 gal/hour (39.7 l/hour) / 10.4 gal/hour (39.4 l/hour) |
| Max power | 142.58 hp (106.3 kW) |
| Max pull | 20,868 lbs (9465 kg) |
| Power at rated engine speed | 164.38 hp (122.6 kW) |
| Power at rated PTO speed | 168.30 hp (125.5 kW) |
References
| Description | RT/DT Series - Ready to Rumble published in 2001, by AGCO |
|---|