Home / AGCO / Allis 9690

AGCO Allis 9690 Specs ( 1994-1995 )

Compare Tractor

Overview

The AGCO Allis 9690 is a four-wheel drive row-crop tractor manufactured between 1994 and 1995, featuring a 9.6L 6-cylinder air-cooled turbocharged diesel engine. It is equipped with an 18-speed full power shift transmission and a standard air-conditioned cab. Tested performance figures include a maximum PTO power of 205.49 hp and a drawbar power of 170.56 hp.

Ideal Applications

Tested Power Output: According to OCED Tractor Test 1684, the engine produced 205.49 hp at rated PTO speed and 170.56 hp at the drawbar, with fuel consumption rates ranging from 12.0 to 12.5 gallons per hour.
Transmission and Drive Configuration: The mechanical layout consists of a four-wheel drive system, an 18-forward and 9-reverse full power shift transmission, and electro-hydraulic rear differential locks with inboard planetary final drives.
Hydraulic and Hitch Measurements: The closed-center pressure-compensating hydraulic system provides a tested pump flow of 21.8 gpm at 2500 psi and a tested rear lift capacity of 8,172 pounds at 24 inches.

Production

Description Row-Crop tractor / Original price was $107,000 in 1995
Manufacturer AGCO Allis (a part of AGCO)

Engine

Engine type Deutz 9.6L 6-cyl diesel
Fuel tank 97 gal (367.1 L)
Bore/Stroke 4.92x5.12 inches (125 x 130 mm)
Compression 15.8:1
Description Deutz BF6L513R / turbocharged diesel / 6-cylinder / air-cooled
Displacement 584 ci (9.6 L)
Oil capacity 24 qts (22.7 L)
Pre-heating ether injection
Rated RPM 2300
Starter volts 12
Drawbar (tested) 170.56 hp (127.2 kW)
PTO (claimed) 195 hp (145.4 kW)
PTO (tested) 205.49 hp (153.2 kW)

Transmission

Clutch hydraulic wet disc
Gears 18 forward and 9 reverse
Transmission type 18-speed full power shift
Type full power shift

Mechanical

Cab Cab standard with air-conditioning.
Description Power steering / Hydraulic wet disc brakes
Differential lock electro-hydraulic rear
Drive type Four-wheel drive
Final drives inboard planetary

Hydraulics

Pressure 2500 psi (172.4 bar)
Pump flow 24 gpm*Advertised. Actual flow during testing was 21.8 GPM. (90.8 lpm)
Rear valves 3 or 4
Type closed center pressure-compensating

Hitch

Control lower-link draft sensing
Rear lift (at 24"/610mm) 9900 lbs*Advertised. Actual tested lift capacity was 8172 pounds. (4490 kg)
Rear Type III/II

PTO

Clutch hydraulic wet disc
Rear PTO independent
Rear PTO Type 1000

Electrical

Batteries 2
Battery CCA 580
Battery volts 12
Charging amps 105
Charging system alternator
Ground negative

Dimensions & Tires

Standard tires (ag) Front: 16.9R28. Rear: 20.8R38
Bar rear axle 3.875 by 96 inches (98 by 2438 mm) / 3.875 by 115 inches (98 by 2921 mm)
Clearance (drawbar) 17 inches (43 cm)
Clearance (front axle) 22 inches (55 cm)
Front tread 61.2 to 87.2 inches (155 to 221 cm)
Height (cab) 120.5 inches (306 cm)
Length 200 inches (508 cm)
Operating weight 19405 lbs (8802 kg)
Rear tread 64.1 to 107.1 inches (162 to 272 cm) / 64.1 to 126 inches (162 to 320 cm)
Shipping weight 18100 lbs (8210 kg)
Wheelbase 115 inches (292 cm)
Width 96 inches (243 cm)
Front tire 16.9R28
Rear tire 20.8R38
Weight 18100 to 19405 pounds
Wheelbase 115 inches (292 cm)

9690 Serial Numbers

1994 981001
1995 981501
Description FAQ: How to read a serial number table.
Location: Console, right side

OCED Tractor Test 1684

Description Diesel 18-speed 4WDOctober 4 - 19, 1994Link: OCED Tractor Test 1684 file / PTO performance / Drawbar performance / Gear 7 used for power test.
Fuel use 12.0 gal/hour (45.4 l/hour) / 12.4 gal/hour (46.9 l/hour) / 12.0 gal/hour (45.4 l/hour) / 12.5 gal/hour (47.3 l/hour)
Max power 205.49 hp (153.2 kW) / 170.56 hp (127.2 kW)
Power at rated engine speed 195.63 hp (145.9 kW)
Power at rated PTO speed 205.49 hp (153.2 kW)

References

Description 9600/9800 Series Tractors published by AGCO / 9600 Series published in 1991, by AGCO