Home / AGCO / Allis 6690

AGCO Allis 6690 Specs ( 1991-1997 )

Compare Tractor

Overview

The AGCO Allis 6690 is an Italian-built utility tractor produced between 1991 and 1997, featuring a 4.0L four-cylinder turbocharged, air-cooled diesel engine rated at 80.88 hp. The model was offered in both 2WD and 4WD configurations, utilizing an open center hydraulic system and a choice of synchromesh or partial power shift transmissions ranging from 12 to 30 speeds.

Ideal Applications

Mechanical and Performance Testing: OCED Tractor Test 1080 recorded a maximum drawbar power of 68.53 hp and a tested PTO output of 80.85 hp at 2500 rated engine RPM.
Hydraulic and Lift Configuration: The rear Type II/I hitch is equipped with position and draft control using lower-link sensing, providing a rear lift capacity of 6,790 lbs at the ends.
Operational Weight and Chassis: Depending on the drive type, shipping weights range from 6,724 lbs for 2WD models to 7,385 lbs for 4WD models, with a maximum capacity of up to 12,015 lbs.

Production

Description Utility tractor / Built in Italy / Original price was $35,000 in 1997
Distributor AGCO Allis
Manufacturer SAME

Engine

Engine type SLH 4.0L 4-cyl diesel
Air cleaner dry element
Bore/Stroke 4.13x4.55 inches (105 x 116 mm)
Description SLH 1000.4-AT / turbocharged diesel / 4-cylinder / air-cooled
Displacement 244 ci (4.0 L)
Idle RPM 650-2710
Oil capacity 9.2 qts (8.7 L)
Power 86.91 hp (64.8 kW)
Pre-heating thermostart
Rated RPM 2500
Starter volts 12
Drawbar (tested) 68.53 hp (51.1 kW)
PTO (claimed) 80.88 hp (60.3 kW)
PTO (tested) 80.85 hp (60.3 kW)

Transmission

Clutch 305mm dry disc
Description Four synchronized gears in three ranges. / Five gears (1-5) in three ranges (L/M/H) with high-low power shift.
Gears 12 forward and reverse / 24 forward and 12 reverse / 16 forward and reverse / 30 forward and reverse
Oil capacity 61 qts (57.7 L)
Type synchromesh / partial power shift
Transmission type 12-speed synchromesh / 24-speed / 16-speed / 30-speed partial power shift
Transmission type 12-speed synchromesh / 24-speed / 16-speed / 30-speed partial power shift

Mechanical

Cab Flat-deck with four-post ROPS. Cab optional with air-conditioning.
Description Power steering / Hydraulic wet disc brakes
Drive type Two- or four-wheel drive

Capacity

Fuel 28.27 gal (107.0 L)
Hydraulic system 15.2 gal (57.5 L)

Hydraulics

Capacity 15.2 gal (57.5 L)
Pump flow 11.23 gpm (42.5 lpm)
Type open center
Valves 2

Hitch

Control position and draft control with lower-link sensing
Rear lift (at ends) 6,790 lbs (3079 kg)
Rear Type II/I

PTO

Clutch 124.5mm hydraulic wet disc
Engine RPM 540@2200
Rear PTO independent
Rear PTO Type 540/1000 (1.375)

Electrical

Battery AH 100
Battery volts 12
Charging amps 55
Charging system alternator
Ground negative

Dimensions & Tires

Standard tires (ag) Front: 7.50-18. Rear: 16.9R34 (2WD)
2WD Wheelbase 96.4 inches (244 cm)
4WD Wheelbase 92.8 inches (235 cm)
Description Flange rear axle
Ground clearance 17.6 inches (44 cm)
Height 111.2 inches (282 cm)
Length 161 inches (408 cm)
Width 82.4 inches (209 cm)
2WD Wheelbase 96.4 inches (244 cm)
4WD Wheelbase 92.8 inches (235 cm)
Front tire 7.50-18
Rear tire 16.9R34 (2WD)
Weight 6724 to 7385 pounds

6690 Serial Numbers

1991 1001
1992 1427
1993 1506
1994 1669
1995 1888
1996 2010
Description FAQ: How to read a serial number table.
Location: Console, right side

AGCO Allis 6690 Weight

2WD Max capacity 11,464 lbs (5200 kg)
2WD Shipping 6,724 lbs (3050 kg)
4WD Max capacity 12,015 lbs (5450 kg)
4WD Shipping 7,385 lbs (3349 kg)

OCED Tractor Test 1080

Description Diesel 12-speed 5/1987Link: OCED Tractor Test 1080 file / PTO performance / Drawbar performance
Fuel use 4.7 gal/hour (17.8 l/hour) / 5.3 gal/hour (20.1 l/hour)
Max power 68.53 hp (51.1 kW)
Power at rated engine speed 80.85 hp (60.3 kW)

References

Description 6600 Series published in 1991, by AGCO

Speeds

Description With 16.9R34 rear tires.

Variants

Explorer II 90 similar SAME model