Home / AGCO / AGCOSTAR 8360

AGCO AGCOSTAR 8360 Specs ( 1995-2001 )

Compare Tractor

Overview

The AGCOSTAR 8360 is a four-wheel drive farm tractor produced between 1995 and 2001 in Coldwater, Ohio, featuring an articulated chassis and a 14.0L Cummins N14 turbocharged diesel engine. It is equipped with an 18-speed Eaton Fuller partially synchronized transmission and was available in three paint options representing Massey, Allis, or White brands. The tractor is listed with a shipping weight of 28,300 lbs and a maximum ballasted capacity of 37,500 lbs.

Ideal Applications

Tested Drawbar Performance: According to OCED Tractor Test 1720, the unit achieved a maximum drawbar power of 290.56 hp and a maximum pull of 32,477 lbs while consuming fuel at a rate of 18.9 gallons per hour.
Engine and Power Specifications: The 6-cylinder, 24-valve Cummins diesel engine is rated at 360 hp and produces 1,215 lb-ft of torque at 1,400 RPM, supported by a 230-gallon fuel tank and a dual paper element air cleaner.
Hydraulic and Mechanical Configuration: The mechanical profile includes a closed-center hydraulic system with a 35 gpm pump flow, four or five valves, and outboard planetary final drives with hydraulic dry disc brakes.

Production

Description Built in Coldwater, Ohio, USA / After purchasing McConnell in 1994, AGCO turned the McConnell 900 into the AGCOSTAR 8360. Three paint options were available depending on whether the customer wanted Massey red, Allis orange, or White silver.
Drive type Four-wheel Drive (4WD) tractor
Manufacturer AGCO

Engine

Engine type Cummins 14.0L 6-cyl diesel
Fuel tank 230 gal (870.6 L)
Air cleaner dual paper elements with aspirator
Bore/Stroke 5.50x6.00 inches (140 x 152 mm)
Compression 16.5:1
Description Cummins N14 / turbocharged aftercooled diesel / 6-cylinder 24-valve / liquid-cooled inline
Displacement 855 ci (14.0 L)
Fuel system direct injection
Idle RPM 825-2400
Power 360 hp (268.5 kW)
Pre-heating coolant heater
Rated RPM 2100
Starter volts 12
Torque 1215 lb-ft (1647.5 Nm)
Torque RPM 1400
Drawbar (tested) 290.56 hp (216.7 kW)

Transmission

Clutch 393.7mm cerametallic disc
Gears 18 forward and 2 reverse
Transmission Eaton Fuller
Transmission type 18-speed partially synchronized
Type partially synchronized

Mechanical

Cab Cab standard with air conditioning.
Description Articulated power steering / Hydraulic dry disc brakes
Drive type Four-wheel drive
Final drives outboard planetary

Hydraulics

Pressure 2500 psi (172.4 bar)
Pump flow 35 gpm (132.5 lpm)
SCV flow 27 gpm (102.2 lpm)
Type closed center
Valves 4 or 5

Electrical

Batteries 3
Battery CCA 700
Battery volts 12
Charging amps 130
Charging system alternator
Ground negative

Dimensions & Tires

Ag front 20.8R42 / 24.5-32
Ag rear 20.8R42 / 24.5-32
Clearance (drawbar) 23 inches (58 cm)
Ground clearance 20.5 inches (52 cm)
Length 272.4 inches (691 cm)
Wheelbase 137.1 inches (348 cm)
Width 152.9 inches*Width over duals. (388 cm)
Front tire 20.8R42
Rear tire 20.8R42
Weight 28300 lbs (12836 kg)
Wheelbase 137.1 inches (348 cm)

AGCO 8360 Height

Cab 133.2 inches (338 cm)
Exhaust 138.9 inches (352 cm)
Hood 94.6 inches (240 cm)

AGCO 8360 Weight

Ballasted 34200 lbs (15513 kg)
Max capacity 37500 lbs (17010 kg)
Shipping 28300 lbs (12836 kg)

OCED Tractor Test 1720

Description Diesel 18-speed 4WDOctober 7 - 17, 1996Link: OCED Tractor Test 1720 file / Drawbar performance / Gear 5L used for power test. / Gear 2L used for pull test.
Fuel use 18.9 gal/hour (71.5 l/hour)
Max power 290.56 hp (216.7 kW)
Max pull 32,477 lbs (14731 kg)

References

Description AGCOSTAR Sales Training Manual published in 1995 / AgcoStar: Built To be Big On Economy & Production. published in 1997, by AGCO / Product Insight: 9300 STEIGER vs. Agcostar 8360 & 8425 published in 1996