Overview
The AGCO 2027H is a garden tractor produced between 2004 and 2009, featuring a 27 hp Kohler CH740 gasoline V-Twin engine and a Tuff Torq K92 hydrostatic transmission. The machine is configured with independent mid and rear PTOs and a limited Category 1 rear hitch with a rated lift capacity of 300 lbs.
Ideal Applications
Powertrain and Output:
The 725cc air-cooled engine is rated at 27 gross horsepower with a peak torque of 40 lb-ft at 2400 RPM, managed through an infinite-gear hydrostatic drive system.
Hydraulic and Hitch Specifications:
This model is equipped with a 5.3 gpm hydraulic pump and two front valves, supporting a limited Category 1 rear hitch and non-positional control.
Physical Dimensions and Chassis:
Built on a 58.5-inch wheelbase with a cast-iron front axle, the tractor has a maximum rear axle weight of 1800 lbs and is compatible with mid-mount mowers, loaders, and backhoes.
Production
| Description | Garden tractor / Built in Port Washington, Wisconsin, USA / Original price was $8,650 in 2006 |
|---|---|
| Distributor | AGCO |
| Manufacturer | Simplicity |
Engine
| Description | 27HP Kohler 725cc 2-cyl gasoline |
|---|---|
| Bore/Stroke | 3.27x2.64 inches (83 x 67 mm) |
| Compression | 9:1 |
| Description | Kohler CH740 / gasoline / 2-cylinder / air-cooled horizontal-shaft V-Twin |
| Displacement | 725 cc (44.24 ci) |
| Oil capacity | 2.1 qts (2.0 L) |
| Power (gross) | 27 hp (20.1 kW) |
| Starter | electric |
| Starter volts | 12 |
| Torque | 40 lb-ft (54.2 Nm) |
| Torque RPM | 2400 |
Transmission
| Description | hydrostatic |
|---|---|
| Gears | infinite forward and reverse |
| Oil capacity | 8.4 qts (2WD) (7.9 L) |
| Oil change | 250 h |
| Oil type | Type F ATF |
| Transmission | Tuff Torq K92 |
| Type | shaft-driven hydrostatic |
Mechanical
| Cab | Open operator station. Optional two-post folding ROPS. Optional hard-side weather cab. |
|---|---|
| Description | Power steering / Wet disc brakes |
| Differential lock | mechanical rear |
| Drive | 4x2 2WD |
Capacity
| Front axle | 1.6 qts (1.5 L) |
|---|---|
| Fuel | 5.5 gal (20.8 L) |
Hydraulics
| Front valves | 2 |
|---|---|
| Pressure | 300 psi (20.7 bar) |
| Pump flow | 5.3 gpm (20.1 lpm) |
Hitch
| Control | non-positional control |
|---|---|
| Rear lift (at 24"/610mm) | 300 lbs (136 kg) |
| Rear Type | 1 (limited) |
PTO
| Clutch | electro-magnetic / electro-magnetic |
|---|---|
| Mid PTO | independent |
| Rear PTO | independent |
| Rear PTO Type | 540 |
Electrical
| Battery CCA | 500 |
|---|---|
| Battery volts | 12 |
| Charging amps | 15 |
| Charging system | alternator |
| Ground | negative |
Dimensions & Tires
| Ag front | 18x8.5-10 |
|---|---|
| Ag rear | 26x12-12 |
| Lawn/turf front | 18x8.5-8 |
| Lawn/turf rear | 26x12-12 |
| 2WD Width | 44.75 inches (113 cm) |
| 4WD Width | 47.25 inches (120 cm) |
| Front axle | Cast-iron |
| Height | 51 inches (129 cm) |
| Length | 81 inches (205 cm) |
| Rear axle | 1.156 inch diameter (29 mm) |
| Wheelbase | 58.5 inches (148 cm) |
| Front tire | 18x8.5-8 |
| Rear tire | 26x12-12 |
| Weight | 830 to 980 pounds |
| Wheelbase | 58.5 inches (148 cm) |
AGCO 2027H Weight
| 2WD | 830 lbs (376 kg) |
|---|---|
| 4WD | 980 lbs (444 kg) |
| Max rear axle | 1800 lbs (816 kg) |
AGCO 2027H attachments
| Description | 48" mid-mount mower deck / 54" mid-mount mower deck / 60" mid-mount mower deck / snowblower / blade / front-end loader / backhoe |
|---|
References
| Description | Lawn & Garden Equipment published in 2004, by AGCO / Lawn and Garden Equipment published in 2009, by AGCO |
|---|
Variants
| 2927H | similar Massey Ferguson model |
|---|---|
| Legacy XL 27 | similar Simplicity model |